Recommended Posts

On 20/04/2023 at 14:52, DocM said:

 

Yep, one what they can and apply it to the next flight vehicles, which are already upgraded vehicles with many changes. 

do you think the fact 6 engines went out, 5 of which were off to one side, was the reason it wasn't following the right path, it looked like it leaned over right at launch. 

On 20/04/2023 at 14:38, bguy_1986 said:

lol

 

Was the whole stack supposed to flip?  I was a little confused with the stream about that.

Yes ... ish. It was supposed to flip 180degrees, separate, then the top bit was supposed to flip back and continue to space and the bottom bit slowing down and returning to a hard splash down.

*Edit*

 🤪I'm wrong, no the whole stack wasn't supposed to flip. 

Edited by Slugsie
On 20/04/2023 at 09:04, Slugsie said:

Yes ... ish. It was supposed to flip 180degrees, separate, then the top bit was supposed to flip back and continue to space and the bottom bit slowing down and returning to a hard splash down.

Uh, nope.  Separation would be like any other rocket...first stage cuts, separation, second stage lights.  This sequence of "flip to 180 degrees, separate, etc" isn't correct.

The flight path was obviously wrong starting ~ +2 min (almost a minute before main engine cutoff at 2:49 and sep at 2:52).

Still a pretty cool launch...

On 20/04/2023 at 10:04, Slugsie said:

Yes ... ish. It was supposed to flip 180degrees, separate, then the top bit was supposed to flip back and continue to space and the bottom bit slowing down and returning to a hard splash down.

The flight plan was to have the first stage separate and almost simultaneously flip 180°, not the entire stack. Almost as soon as they physically clear Starship lights its engines.

On 20/04/2023 at 15:22, Jim K said:

Uh, nope.  Separation would be like any other rocket...first stage cuts, separation, second stage lights.  This sequence of "flip to 180 degrees, separate, etc" isn't correct.

The flight path was obviously wrong starting ~ +2 min (almost a minute before main engine cutoff at 2:49 and sep at 2:52).

Still a pretty cool launch...

Yeah, um, sorry. Ignore what I said, I wasn't paying attention when I typed that out.

On 20/04/2023 at 10:00, anthdci said:

do you think the fact 6 engines went out, 5 of which were off to one side, was the reason it wasn't following the right path, it looked like it leaned over right at launch. 

 

It lost one center cluster engine and two adjacent engines in the outer ring at liftoff, 

Starshipliftoffengineout640.jpg.3e090c6617c47a8637f6a279f2d4742a.jpg

Losing more in the same area of the outer ring would cause a large thrust imbalance so yeah, it may well have something to do with it. More so if the others lost were in the center cluster, which does the steering. The outer ring engines don't gimbal.

Let's see what they come up with.

On 20/04/2023 at 15:59, DocM said:

 

It lost one center cluster engine and two adjacent engines in the outer ring at liftoff, 

Starshipliftoffengineout640.jpg.3e090c6617c47a8637f6a279f2d4742a.jpg

Losing more in the same area of the outer ring would cause a large thrust imbalance so yeah, it may well have something to do with it. More so if the others lost were in the center cluster, which does the steering. The outer ring engines don't gimbal.

Let's see what they come up with.

I’m surprised they let it go when they had a centre one out from the pad.

On 20/04/2023 at 11:34, anthdci said:

I’m surprised they let it go when they had a centre one out from the pad.

There are 13 engines in that center cluster and only one was out when they left the pad. You can make up that   loss by throttling up the others and still have reserve  power.

Washington Post space reporter,

 

More questions for anybody that knows.  Seemed like it sat on the pad before lifting off more than I assume it should.  ~+7 seconds.  Was that normal?  I assume that could have caused some engine problems with all the vibrations and flying debris.  I think there were also multiple versions of the engines in this Starship.  Like very early versions to much later versions, so that could have had something to do with engine failure too.  Anybody know what the spread was on that?

Did they have a deluge system for this test?  I was thinking they were moving stuff getting ready to install one but am probably wrong.

On 20/04/2023 at 19:29, bguy_1986 said:

More questions for anybody that knows.  Seemed like it sat on the pad before lifting off more than I assume it should.  ~+7 seconds.  Was that normal?  I assume that could have caused some engine problems with all the vibrations and flying debris.  I think there were also multiple versions of the engines in this Starship.  Like very early versions to much later versions, so that could have had something to do with engine failure too.  Anybody know what the spread was on that?

Did they have a deluge system for this test?  I was thinking they were moving stuff getting ready to install one but am probably wrong.

Yeah, I noticed that. I thought they said before the lift off that the engines would start firing up around t-6s in 3 stages with them all being lit at t0. It looked like they didn't really start up until t0 in which case t+7s would be about as expected.

  • Thanks 1
On 20/04/2023 at 14:29, bguy_1986 said:

More questions for anybody that knows.  Seemed like it sat on the pad before lifting off more than I assume it should.  ~+7 seconds.  Was that normal?  I assume that could have caused some engine problems with all the vibrations and flying debris.  I think there were also multiple versions of the engines in this Starship.  Like very early versions to much later versions, so that could have had something to do with engine failure too.  Anybody know what the spread was on that?

Standard startup in clusters, mainly to reduce instantaneous and vibration loads.

 

On 20/04/2023 at 14:29, bguy_1986 said:

Did they have a deluge system for this test?  I was thinking they were moving stuff getting ready to install one but am probably wrong.

 

They have a new deluge system that will be going in. It was barged in from Florida.

  • Thanks 1

Starship pad update

It turns out SpaceX has built a water cooled plume diverter for the Starship OLM. It wasn't ready in time so they tried to do the first launch without it. The pad should be ready in 1 to 2 months.

Twitter thread

https://twitter.com/SciGuySpace/status/1649521809279025153

Screencap

StarshipOFTpadposts800.thumb.jpg.2cbc0a9b807948ce7446ed1543ff0cf3.jpg

  • Like 1
On 22/04/2023 at 12:03, Xenon said:

 

The SpaceX launch license is for 5 years, and NASA posted before the flight that missions 1-3 would be expendable tests to find issues.

Mission accomplished;

• the concrete under the pad couldn't take the loads and they have a cooled steel diverter already built. 

• Booster 7 was a one-off test article. Follow-on boosters are of a higher fidelity design.

The accident procedure isn't that FAA does the investigation. SpaceX does the investigation and FAA signs off on the report. 

On 22/04/2023 at 12:31, wakjak said:

"smashing success!" -Elon cucks.

 

Random guy on the internet clucks & ridicules, engineers in the industry know better.

From before the test (Space.com),

https://www.space.com/spaceflight-failure-necessity-sls-spacex

 

Quote

When it comes to space, failure isn't just an option — it's a requirement

By Rick Tumlinson

 published 29 days ago

The difference between a winner and a loser is that the winner gets back up, learns from what they did wrong and does it again.

Anyone familiar with space movies, or who has visited a NASA gift shop, knows the phrase "Failure is not an option." Actually, it is. In truth, if one is to win at anything, failure is a requirement. We only learn by what we learn from making mistakes. That is if — and this is an important "if" — we accept the learning we gain from the failure and apply it to our future endeavors.

The exploration and development of space are no exceptions. Or rather, they highlight the rule.

>

>

 

  • Like 3
On 22/04/2023 at 15:22, DocM said:

 

Random guy on the internet clucks & ridicules, engineers in the industry know better.

From before the test (Space.com),

https://www.space.com/spaceflight-failure-necessity-sls-spacex

 

 

Point proven, thanks.

On 22/04/2023 at 14:05, DocM said:

 

The SpaceX launch license is for 5 years, and NASA posted before the flight that missions 1-3 would be expendable tests to find issues.

Mission accomplished;

• the concrete under the pad couldn't take the loads and they have a cooled steel diverter already built. 

• Booster 7 was a one-off test article. Follow-on boosters are of a higher fidelity design.

The accident procedure isn't that FAA does the investigation. SpaceX does the investigation and FAA signs off on the report. 

You forgot about the damage to the tank farm, the tower and the road. Also the clean up of debris around the launch site. Real professional there. 

 

 

They go over ALL the damage that was known at the time. 

Edited by Xenon
  • Like 1
On 22/04/2023 at 15:13, Xenon said:

You forgot about the damage to the tank farm, the tower and the road. Also the clean up of debris around the launch site. Real professional there. 

 

First lets be clear, the usual suspects turning this into a sub of the "We hate Elon!" thread is silly. Gwynne Shotwell has been running Starbase for several months as they transition to operational. 

This was the most powerful booster ever built how do you quantify enough structure? Unknown unknowns. They had mid-term upgrades in the works for when the engines would launch at full power but took a chance at launching at lower power (no payload) and it bit them, so give up? No, learn and continue.

One tank was unused, another sustained damage to the outer tank shell not the vessel. Make the berm higher.

A steel shed attached to the tower and some panels covering the lower tower took hits. Needs more examination. Replace, fix, etc.

Concrete work under the pad, adding the deluge system & water cooled deflection panels seem to be the long pole. Cleaning roads isn't. 

 

On 22/04/2023 at 15:13, Xenon said:

They go over ALL the damage that was known at the time. 

 

They speculate from a distance quite a bit, but the engineers & padrats on the open & private forums are having quite a discussion - largely shooting down arm-wavers. 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DWARF mini review: the world's smallest smart telescope for night and day sky captures by Steven Parker DWARFLAB reached out to me asking if I was interested in checking out the DWARF mini, which is a portable astronomy telescope designed for amateur astronomers. Why do I say it's for amateurs? Well, for starters, it's not what you'd call "high end"; it's more of a professional-grade starting point for amateurs serious about capturing what's up there in our night and day skies. A typical amateur astronomer is most likely thousands of dollars deep into the hobby, and I will make no claims that this DWARF mini (at a fraction of the cost) could replace it all, okay? Well, if you read on, it will be clearer what I am trying to convey. Disclosure: DWARFLAB provided a free sample without any editorial input or review pre-approval. I have always been interested in looking up and observing the night sky. I see satellites crossing the sky above my garden most nights, and I am always looking at the moon. Yeah, I have a 200MP camera on my phone, but at 200X zoom, AI takes over and makes the pretty moon pictures that I snap, the DWARF mini does not, you get an actual true picture of what you can barely see with the naked eye. Before we start, let's share the highlights of the DWARF mini in bite-sized format: Pocket-Sized & Ultra-Lightweight Weighing just 1.85 lbs (840g), the DWARF mini easily fits into a backpack or large pocket. Its all-in-one, compact design makes it the ultimate grab-and-go digital telescope for hiking, camping, or traveling to dark-sky locations. Intuitive App Control & Built-in Sky Atlas Go from unboxing to your first shot in just 3 minutes! The DWARFLAB App provides a seamless experience with an interactive star map. Simply select your target and start exploring without the steep learning curve of traditional setups. Auto GOTO & 360° Pivot Freedom Enjoy pinpoint automated tracking with full 360° rotation. Powered by a high-sensitivity Sony IMX662 sensor (1/2.8-inch, 2.9μm pixels), it captures amazing, low-noise astro details, bringing faint nebulas and star clusters to life with stunning clarity. Pro-Level EQ Mode & Long Exposure Unlock advanced deep-space imaging with Equatorial (EQ) Mode. Supporting impressive single-frame exposures up to 90 seconds and featuring built-in light pollution filters, it easily cuts through city glow to reveal intricate celestial structures. Smart Cloud Processing & All-Ages Fun Effortlessly enhance your raw data with integrated cloud processing for professional-grade results. Perfect for beginners, kids, and adults, this telescope makes exploring and sharing the wonders of the universe an exciting, family-friendly adventure. The packaging is a pretty minimal affair with the outer box opening like a flap to reveal the plastic mould of the DWARF mini sitting in it. Below, the Sun filter, charging cable, cleaning cloth, and documentation can be found. DWARFLAB also provided a Mini Hydraulic Tripod ($89.99), and I highly recommend getting it if you plan on purchasing the DWARF mini, as it fully supports the motorized tracking feature of the telescope; plus, at 840g, the weight of the telescope, you will need a tripod that supports more than the weight of a smartphone anyway. What's in the box DWARF Mini Smart Telescope × 1 Sun Filter x 1 Type-C to Type-C Cord x 1 Cleaning Cloth x 1 User Guide With that out of the way, here are the full specs: DWARF mini Dimensions (DWH): 60.70 mm x 100.38 × 183.61 (2.39" x 3.95" x 7.23") Weight: 840g (1.85lbs) Aperture diameter: 30 mm (telephoto), 3.4 mm (wide angle) Image Sensor: SONY IMX662 1/2.8" (Telephoto) OmniVision OS02K10 1/2.8" (Wide-angle) Focal length: 150 mm (telephoto), 6.7 mm (wide-angle) Equivalent focal length: 1016 mm (telephoto), 45 mm (wide-angle) Shutter Speed: Tele - 1/10000-90s, Wide - 1/10000-30s Maximum exposure time: 90s (telephoto & wide-angle), Both in EQ mode Rotation range: Lens: 225°, Base: 360° Effective Pixels: 2.07M Maximum Resolution: 1920 × 1080 (Telephoto & Wide-angle) Built-in filters: Astro, Dark, Duo-Band (Telephoto), Astro (Wide-angle) Output: JPG, FITS, TIFF, MP4 Shooting Mode: Photos, Videos, Astronomy, Burst Shooting, Time-lapse Photography Storage: 64 GB Battery: Built-in 7000 mAh, supports external USB charging Charging Port: Type-C NPU: 1 TOPS Features: WiFi, NFC NFC One-Touch Connection Astronomy Post-Processing/Appointment Shooting/Astronomy Mosaic Wi-Fi Transmission Range: 15m (open environment) Color: Black Compatibility: iOS & Android smartphones/tablets Warranty: 2-years (24-months) MSRP: $399 Design Charge port On/off button Lens On the DWARF mini itself, it is a pretty minimal affair. On one side, there is a Type-C USB port to charge the non-removable 7000 mAh battery, and on the other side, a large button to power on or off the telescope. The button is flanked by an LED that is green when connected via the DWARFLAB app, or lights up red when being powered off. Below the button, there are four LEDs that indicate battery power. The DWARF mini does not have any sharp edges as all sides are rounded off; it has a good heft to it, but the weight of it feels quite balanced in the hand, so it isn't top or bottom-heavy. On the front there is the DWARFLAB logo which is quite small and there are no other markings on it. The tripod offers full 360° rotation of the motorized base, which allows for tracking for the time-lapse mode, but also for the 90-second captures of nearer objects in the sky, such as the Sun or the moon. Usage To get started, simply power on the DWARF mini and open the DWARFLAB app, tap on Connect, and it will scan for the DWARF mini over the Wi-Fi network. The device supports both 2.4 GHz and 5 GHz Wi-Fi, as well as Bluetooth for discovery, so connection issues were minimal in my experience with it. As previously noted in the specs, the DWARF mini will stay connected with a phone or tablet up to 15 meters in an open environment, such as a backyard. Lighting status Powering on: The green circular light will rotate and breathe in turn Powering off: The red circular light is gradually extinguished Connecting: Green light strip rotating Connected: Green light strip solid/always on 4 lights 1= 0-25%, 2= 25-50%, 3= 50-75%, 4= 75-100% battery power To view the full lighting status, such as tracking mode and connection failure, you can check the user guide on the official DWARFLAB page. DWARFLAB app Above, you can see the steps undertaken to connect the DWARFLAB app to my Galaxy S26 Ultra. Weirdly, I got an alert that a firmware update failed to get uploaded to the DWARF mini the first time, but upon retrying, it worked. Then place the DWARF mini outside, make sure your smartphone or tablet is connected to it, and then head back inside, because you can manage it from the comfort of your home. Simply enter the Atlas tab in the app and search for what you want to capture, and then tap on the camera icon; the DWARF mini will then attempt to track the object and give you a live view right on your connected device. Results I've had the DWARF mini since April, but even though my garden is south-facing, I had a lot of trouble trying to capture a good image of the moon. In the end, it was possible after I took it with me on a trip to my parents in Southend, UK, at the end of May. Here is a capture of the moon, resulting from 20 stacked images over a 90-second exposure. What you are seeing here is not AI-assisted. A good example of what I mean is the latest flagships with their 200MP cameras claiming to capture things like closeups of the moon, and while they are not as good as the above example on the DWARF mini, the resulting image on smartphones is actually AI-assisted above 30X zoom. Here is an example of a similar shot at the moon at 200X zoom using an HONOR Magic8 Pro. The difference is clear. Next, here we have a shot of the daytime moon. Here is a shot of Arcturus, the red giant star, which is the fourth brightest in the night sky. As previously mentioned, it could be a bit clearer, but clouds passing in front of it muddied the shot a bit. The Sun The DWARF mini also ships with a sun filter, meaning you can take great shots of the sun as well. Tracking Sun Resulting (stacked) shot Live zoom The pictures themselves are limited to Full HD, and some of the examples actually came out in HD (1280x720), but this is because the standard telescopic result is in 720p while "Wide" is in 1080p. Above you can see how in the app the Sun is tracked, the resulting capture, and Live zoom. I have only scratched the surface of what is possible with this telescope; I found several examples online of shots of the Milky Way, among others, such as nebulae and galaxies. All of this requires patience and knowledge, although if you know what you are looking for, simply enter it in the Atlas tab in the DWARFLAB app, tap the camera icon, and the telescope will attempt to track it. Conclusion The good The DWARF mini definitely places itself in a price point that makes astrology accessible to anyone looking to get started in the hobby. Say you want to have a closer look at the moon, simply enter it in the Atlas, and the Live view also lets you zoom in and snap pictures. The bad Some issues I came across while operating the DWARF mini were that it sometimes failed to connect unless I held my smartphone right next to it, and finding and tracking sometimes took several attempts to get it calibrated. I discovered that it helped if I sort of positioned and pointed the telescope in the general area it was supposed to detect, but this obviously wouldn't work with objects you can't see with the naked eye; more testing is required for that. Another bit of advice is to ensure that the lens is clean. While making the examples of live zooming on the sun, I discovered that the telescope lens and sun filter were not completely clean, and only after cleaning with a microfiber cloth was I able to get a decent shot of the sun. Where to buy and a coupon Okay, $399 is not cheap for a side hobby, but nor is a $1,500 smartphone flagship that you'll most likely have for a couple of years. This is a one-time entrance into astrology, and it won't become obsolete in one year like a smartphone. It's a thumbs up from me. The DWARF mini is available to buy right now in the U.S. and U.K. at the links below. DWARF mini for $399 on the official site DWARF mini for $399 on Amazon U.S. Use the NEOWIN5OFF coupon code for an additional 5% off at checkout (expires June 21) As an Amazon Associate, I earn from qualifying purchases.
    • Adobe Acrobat Reader Dis Continued
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      Skyfrog
      75
    4. 4
      +Edouard
      75
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!