Recommended Posts

FAA backup dates and times

https://www.fly.faa.gov/adv/adv_spt.jsp

SPACE-X STARSHIP OFT-3, BOCA CHICA, TX PRIMARY:

03/14/24 1200Z-1431Z 

BACKUP:

03/15/24 1200Z-1431Z 

03/16-17 1200Z-1301Z 

03/18/24 1200Z-1431Z

 

 

On 13/03/2024 at 13:29, DocM said:

Game On

FTS is ready, and BocaChicaGal (NSF photographer) got her evacuation notice.

Winds may be a problem, time will tell.

Local sunrise is 38 minutes after the window opening, so it may be Starship's first night launch.

evacuation notice for when?

On 13/03/2024 at 13:46, Warwagon said:

evacuation notice for when?

It appears to be for tomorrow (Thursday) morning.  The FAA just released their impact assessment for the landing zone in the Indian Ocean, so the official launch license should be approved any time now.
I'm a little surprised that they'd go from license approval to full-send within less than a day, but I guess the rocket is on the pad and ready to launch as we speak.  Let's light this candle!

The main constraint is now weather.

FAA Statement on SpaceX Starship OFT-3 License Modification Approval (March 13, 2024)


The FAA is authorizing the Space Starship Super Heavy Orbital Flight Test 3 (OFT-3) launch. The FAA determined SpaceX met all safety, environmental, policy and financial responsibility requirements.

As part of the license modification evaluation, the FAA prepared a Tiered Environmental Assessment for SpaceX Starship Indian Ocean Landings and issued a Finding of No Significant Impact/Record of Decision.

The license applies to all phases of the proposed OFT-3 operation. This includes preflight preparations and liftoff from Texas, the water landing of the Super Heavy booster in the Gulf of Mexico, and the water landing of the Starship vehicle in the Indian Ocean.
 

 

On 14/03/2024 at 15:45, Xenon said:

If anyone heard a giant kaplunk it was the booster hitting the gulf. It looks like it hit the water at around 1111 km/h, or about 690 mph. 

That's 0.899 the speed of sound or just under Mach 1 (1234,8 km/h)

From my extremely amateur space flight eyes, it seems like Starship was a little out of control on it's way down.  Maybe the same thing with the booster?

I'm also curious why they didn't attempt a relight in space and if the fuel on both is supposed to be so empty? (I'm assuming it just looks a lot emptier than it actually is in their video.  Very possible it had plenty to land).  Did the camera also show some debris in one of Starships tanks?

 

On 14/03/2024 at 10:45, Xenon said:

If anyone heard a giant kaplunk it was the booster hitting the gulf. It looks like it hit the water at around 1111 km/h, or about 690 mph. 

Where did you see that?

On 14/03/2024 at 10:50, bguy_1986 said:

From my extremely amateur space flight eyes, it seems like Starship was a little out of control on it's way down.  Maybe the same thing with the booster?

 

During entry ship uses the  fins to do rolls, so seeing it go side to side is expected. By varying all four fins in different directions it can do roll, pitch, and yaw with just four non-wing surfaces.

 

On 14/03/2024 at 10:50, bguy_1986 said:

I'm also curious why they didn't attempt a relight in space and if the fuel on both is supposed to be so empty? (I'm assuming it just looks a lot emptier than it actually is in their video.  Very possible it had plenty to land).  Did the camera also show some debris in one of Starships tanks?

 

Starting up the Raptor would have added velocity, and they were running out of Landing zone. They didn't want it to land or debris to fall outside of that zone. During the webcast they said this was pre-programmed.

 

On 14/03/2024 at 10:50, bguy_1986 said:

Where did you see that?

 

When booster tried to do the landing burn it looked like there were some very severe grid fin rotations, indicating they didn't have enough control authority. They can fix that. File under "why we test"

The resultant dreideling probably sloshed propellants away from the intakes, which could be the cause of some engines not starting.

On the other hand

The pez dispenser door opened and closed

Propellant transfer was initiated, and at some point the computer signaled a completion of the test. Data will tell if the propellant volume transferred was sufficient.

All in all, a pretty successful test flight.

As mentioned earlier, the Flight 4 booster and vehicle are already built and in testing flow. 

SpaceX and FAA are talking as many as 10 total flights this year, depending on how they go. Five with belly flop, 5 would try to do soft landings on the water.

 

Edited by DocM
  • Like 1
On 14/03/2024 at 11:07, DocM said:

 

When booster tried to do the landing burn it looked like there were some very severe grid fin rotations, indicating they didn't have enough control authority. They can fix that. File under "why we test"

 

I have a hard time reading sometimes.  I thought @Xenon was talking about Starship yet. 

FTS wouldn't have blown the ship up after engines didn't relight?  (I have no idea how close it is to earth when it needs to relight).

On 14/03/2024 at 14:11, bguy_1986 said:

I have a hard time reading sometimes.  I thought @Xenon FTS wouldn't have blown the ship up after engines didn't relight?  (I have no idea how close it is to earth when it needs to relight).

They usually safe the FTS during landings. Don't want to blow up the landing structures more than just a fuel  conflagration. Both ship and booster have two quite large charges.

I think the loss of control authority by the grid fins is why the booster looked like it was driedeling down to the Landing zone. That kind of eccentric roll usually takes propellant away from the engine intake manifold.

Edited by DocM
  • Like 1

The ship looked to be tumbling the whole time after it left the booster. Even coming through the atmosphere it looked to roll onto the not shielded side. Im guessing some work on the ship control will result it a much better return to earth.

  • Like 1
On 14/03/2024 at 21:53, IsItPluggedIn said:

The ship looked to be tumbling the whole time after it left the booster. Even coming through the atmosphere it looked to roll onto the not shielded side. Im guessing some work on the ship control will result it a much better return to earth.

They've been experimenting with using ullage gas, evaporated propellant used to pressurize the tanks, expelled through nozzles for a reaction control system. It would save a ton of weight, but they may have to go back to either high pressure cold gas (used on Falcon 9) or hot pressure fed thrusters.

They have them in the inventory, and most of their thrusters are 3D printed.

Starship v3 will be a #&\>#]# beast

 

Let's just think about this for a minute,

Max payload of Starship V1 in expendable mode (like the other rockets) is ~200 tons.
|
V3 is expected to be ~200 tons with full reusability and ~400 tons expendable. Length will grow by 20 to 30 meters and thrust to ~10k tons.

v2 should be in production this year, v3 a bit later.

v1 Starship was said to be able to carry cargo 10,000 km without using a booster. Clearly, v3 will exceed this by having nine engines instead of six and more propellant.

Starship is one of the vehicles being looked at by Space Force for their point-to-point delivery program (P2PD); military supplies when needed fast, or  emergency supplies in disaster zones. 

Also of interest, Sierra Space (Dream Chaser spaceplane) has announced Ghost, a small cargo delivery vehicle which could be dropped from orbit and land with precision. 

A dropship.

Load a mess of Ghosts into a Starship and spit them out over the zone where they are needed.

Robert A. Heinlein would love this.

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • You can't remove Safari though. Or almost any other bundled app for that matter, and pretty much all of them are useless to me (and there are is a heap of them compared to Windows). I'll much rather take Edge than Safari, at least it can be highly customized vs. Safari. I'll take a PC with ten Edges over a Mac any day though as I can't stand all the limitation and painfully frustrationg restriction that make me dislike their stuff with a burning passion, iOS included (especially iOS).
    • DVD only? What kind of self-respecting optical disk backup/ripping tool doesn't support Blu-ray these days? I burned all my DVDs like 15+ years ago...
    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!