Recommended Posts

FAA backup dates and times

https://www.fly.faa.gov/adv/adv_spt.jsp

SPACE-X STARSHIP OFT-3, BOCA CHICA, TX PRIMARY:

03/14/24 1200Z-1431Z 

BACKUP:

03/15/24 1200Z-1431Z 

03/16-17 1200Z-1301Z 

03/18/24 1200Z-1431Z

 

 

On 13/03/2024 at 13:29, DocM said:

Game On

FTS is ready, and BocaChicaGal (NSF photographer) got her evacuation notice.

Winds may be a problem, time will tell.

Local sunrise is 38 minutes after the window opening, so it may be Starship's first night launch.

evacuation notice for when?

On 13/03/2024 at 13:46, Warwagon said:

evacuation notice for when?

It appears to be for tomorrow (Thursday) morning.  The FAA just released their impact assessment for the landing zone in the Indian Ocean, so the official launch license should be approved any time now.
I'm a little surprised that they'd go from license approval to full-send within less than a day, but I guess the rocket is on the pad and ready to launch as we speak.  Let's light this candle!

The main constraint is now weather.

FAA Statement on SpaceX Starship OFT-3 License Modification Approval (March 13, 2024)


The FAA is authorizing the Space Starship Super Heavy Orbital Flight Test 3 (OFT-3) launch. The FAA determined SpaceX met all safety, environmental, policy and financial responsibility requirements.

As part of the license modification evaluation, the FAA prepared a Tiered Environmental Assessment for SpaceX Starship Indian Ocean Landings and issued a Finding of No Significant Impact/Record of Decision.

The license applies to all phases of the proposed OFT-3 operation. This includes preflight preparations and liftoff from Texas, the water landing of the Super Heavy booster in the Gulf of Mexico, and the water landing of the Starship vehicle in the Indian Ocean.
 

 

On 14/03/2024 at 15:45, Xenon said:

If anyone heard a giant kaplunk it was the booster hitting the gulf. It looks like it hit the water at around 1111 km/h, or about 690 mph. 

That's 0.899 the speed of sound or just under Mach 1 (1234,8 km/h)

From my extremely amateur space flight eyes, it seems like Starship was a little out of control on it's way down.  Maybe the same thing with the booster?

I'm also curious why they didn't attempt a relight in space and if the fuel on both is supposed to be so empty? (I'm assuming it just looks a lot emptier than it actually is in their video.  Very possible it had plenty to land).  Did the camera also show some debris in one of Starships tanks?

 

On 14/03/2024 at 10:45, Xenon said:

If anyone heard a giant kaplunk it was the booster hitting the gulf. It looks like it hit the water at around 1111 km/h, or about 690 mph. 

Where did you see that?

On 14/03/2024 at 10:50, bguy_1986 said:

From my extremely amateur space flight eyes, it seems like Starship was a little out of control on it's way down.  Maybe the same thing with the booster?

 

During entry ship uses the  fins to do rolls, so seeing it go side to side is expected. By varying all four fins in different directions it can do roll, pitch, and yaw with just four non-wing surfaces.

 

On 14/03/2024 at 10:50, bguy_1986 said:

I'm also curious why they didn't attempt a relight in space and if the fuel on both is supposed to be so empty? (I'm assuming it just looks a lot emptier than it actually is in their video.  Very possible it had plenty to land).  Did the camera also show some debris in one of Starships tanks?

 

Starting up the Raptor would have added velocity, and they were running out of Landing zone. They didn't want it to land or debris to fall outside of that zone. During the webcast they said this was pre-programmed.

 

On 14/03/2024 at 10:50, bguy_1986 said:

Where did you see that?

 

When booster tried to do the landing burn it looked like there were some very severe grid fin rotations, indicating they didn't have enough control authority. They can fix that. File under "why we test"

The resultant dreideling probably sloshed propellants away from the intakes, which could be the cause of some engines not starting.

On the other hand

The pez dispenser door opened and closed

Propellant transfer was initiated, and at some point the computer signaled a completion of the test. Data will tell if the propellant volume transferred was sufficient.

All in all, a pretty successful test flight.

As mentioned earlier, the Flight 4 booster and vehicle are already built and in testing flow. 

SpaceX and FAA are talking as many as 10 total flights this year, depending on how they go. Five with belly flop, 5 would try to do soft landings on the water.

 

Edited by DocM
  • Like 1
On 14/03/2024 at 11:07, DocM said:

 

When booster tried to do the landing burn it looked like there were some very severe grid fin rotations, indicating they didn't have enough control authority. They can fix that. File under "why we test"

 

I have a hard time reading sometimes.  I thought @Xenon was talking about Starship yet. 

FTS wouldn't have blown the ship up after engines didn't relight?  (I have no idea how close it is to earth when it needs to relight).

On 14/03/2024 at 14:11, bguy_1986 said:

I have a hard time reading sometimes.  I thought @Xenon FTS wouldn't have blown the ship up after engines didn't relight?  (I have no idea how close it is to earth when it needs to relight).

They usually safe the FTS during landings. Don't want to blow up the landing structures more than just a fuel  conflagration. Both ship and booster have two quite large charges.

I think the loss of control authority by the grid fins is why the booster looked like it was driedeling down to the Landing zone. That kind of eccentric roll usually takes propellant away from the engine intake manifold.

Edited by DocM
  • Like 1

The ship looked to be tumbling the whole time after it left the booster. Even coming through the atmosphere it looked to roll onto the not shielded side. Im guessing some work on the ship control will result it a much better return to earth.

  • Like 1
On 14/03/2024 at 21:53, IsItPluggedIn said:

The ship looked to be tumbling the whole time after it left the booster. Even coming through the atmosphere it looked to roll onto the not shielded side. Im guessing some work on the ship control will result it a much better return to earth.

They've been experimenting with using ullage gas, evaporated propellant used to pressurize the tanks, expelled through nozzles for a reaction control system. It would save a ton of weight, but they may have to go back to either high pressure cold gas (used on Falcon 9) or hot pressure fed thrusters.

They have them in the inventory, and most of their thrusters are 3D printed.

Starship v3 will be a #&\>#]# beast

 

Let's just think about this for a minute,

Max payload of Starship V1 in expendable mode (like the other rockets) is ~200 tons.
|
V3 is expected to be ~200 tons with full reusability and ~400 tons expendable. Length will grow by 20 to 30 meters and thrust to ~10k tons.

v2 should be in production this year, v3 a bit later.

v1 Starship was said to be able to carry cargo 10,000 km without using a booster. Clearly, v3 will exceed this by having nine engines instead of six and more propellant.

Starship is one of the vehicles being looked at by Space Force for their point-to-point delivery program (P2PD); military supplies when needed fast, or  emergency supplies in disaster zones. 

Also of interest, Sierra Space (Dream Chaser spaceplane) has announced Ghost, a small cargo delivery vehicle which could be dropped from orbit and land with precision. 

A dropship.

Load a mess of Ghosts into a Starship and spit them out over the zone where they are needed.

Robert A. Heinlein would love this.

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DWARF mini review: the world's smallest smart telescope for night and day sky captures by Steven Parker DWARFLAB reached out to me asking if I was interested in checking out the DWARF mini, which is a portable astronomy telescope designed for amateur astronomers. Why do I say it's for amateurs? Well, for starters, it's not what you'd call "high end"; it's more of a professional-grade starting point for amateurs serious about capturing what's up there in our night and day skies. A typical amateur astronomer is most likely thousands of dollars deep into the hobby, and I will make no claims that this DWARF mini (at a fraction of the cost) could replace it all, okay? Well, if you read on, it will be clearer what I am trying to convey. Disclosure: DWARFLAB provided a free sample without any editorial input or review pre-approval. I have always been interested in looking up and observing the night sky. I see satellites crossing the sky above my garden most nights, and I am always looking at the moon. Yeah, I have a 200MP camera on my phone, but at 200X zoom, AI takes over and makes the pretty moon pictures that I snap, the DWARF mini does not, you get an actual true picture of what you can barely see with the naked eye. Before we start, let's share the highlights of the DWARF mini in bite-sized format: Pocket-Sized & Ultra-Lightweight Weighing just 1.85 lbs (840g), the DWARF mini easily fits into a backpack or large pocket. Its all-in-one, compact design makes it the ultimate grab-and-go digital telescope for hiking, camping, or traveling to dark-sky locations. Intuitive App Control & Built-in Sky Atlas Go from unboxing to your first shot in just 3 minutes! The DWARFLAB App provides a seamless experience with an interactive star map. Simply select your target and start exploring without the steep learning curve of traditional setups. Auto GOTO & 360° Pivot Freedom Enjoy pinpoint automated tracking with full 360° rotation. Powered by a high-sensitivity Sony IMX662 sensor (1/2.8-inch, 2.9μm pixels), it captures amazing, low-noise astro details, bringing faint nebulas and star clusters to life with stunning clarity. Pro-Level EQ Mode & Long Exposure Unlock advanced deep-space imaging with Equatorial (EQ) Mode. Supporting impressive single-frame exposures up to 90 seconds and featuring built-in light pollution filters, it easily cuts through city glow to reveal intricate celestial structures. Smart Cloud Processing & All-Ages Fun Effortlessly enhance your raw data with integrated cloud processing for professional-grade results. Perfect for beginners, kids, and adults, this telescope makes exploring and sharing the wonders of the universe an exciting, family-friendly adventure. The packaging is a pretty minimal affair with the outer box opening like a flap to reveal the plastic mould of the DWARF mini sitting in it. Below, the Sun filter, charging cable, cleaning cloth, and documentation can be found. DWARFLAB also provided a Mini Hydraulic Tripod ($89.99), and I highly recommend getting it if you plan on purchasing the DWARF mini, as it fully supports the motorized tracking feature of the telescope; plus, at 840g, the weight of the telescope, you will need a tripod that supports more than the weight of a smartphone anyway. What's in the box DWARF Mini Smart Telescope × 1 Sun Filter x 1 Type-C to Type-C Cord x 1 Cleaning Cloth x 1 User Guide With that out of the way, here are the full specs: DWARF mini Dimensions (DWH): 60.70 mm x 100.38 × 183.61 (2.39" x 3.95" x 7.23") Weight: 840g (1.85lbs) Aperture diameter: 30 mm (telephoto), 3.4 mm (wide angle) Image Sensor: SONY IMX662 1/2.8" (Telephoto) OmniVision OS02K10 1/2.8" (Wide-angle) Focal length: 150 mm (telephoto), 6.7 mm (wide-angle) Equivalent focal length: 1016 mm (telephoto), 45 mm (wide-angle) Shutter Speed: Tele - 1/10000-90s, Wide - 1/10000-30s Maximum exposure time: 90s (telephoto & wide-angle), Both in EQ mode Rotation range: Lens: 225°, Base: 360° Effective Pixels: 2.07M Maximum Resolution: 1920 × 1080 (Telephoto & Wide-angle) Built-in filters: Astro, Dark, Duo-Band (Telephoto), Astro (Wide-angle) Output: JPG, FITS, TIFF, MP4 Shooting Mode: Photos, Videos, Astronomy, Burst Shooting, Time-lapse Photography Storage: 64 GB Battery: Built-in 7000 mAh, supports external USB charging Charging Port: Type-C NPU: 1 TOPS Features: WiFi, NFC NFC One-Touch Connection Astronomy Post-Processing/Appointment Shooting/Astronomy Mosaic Wi-Fi Transmission Range: 15m (open environment) Color: Black Compatibility: iOS & Android smartphones/tablets Warranty: 2-years (24-months) MSRP: $399 Design Charge port On/off button Lens On the DWARF mini itself, it is a pretty minimal affair. On one side, there is a Type-C USB port to charge the non-removable 7000 mAh battery, and on the other side, a large button to power on or off the telescope. The button is flanked by an LED that is green when connected via the DWARFLAB app, or lights up red when being powered off. Below the button, there are four LEDs that indicate battery power. The DWARF mini does not have any sharp edges as all sides are rounded off; it has a good heft to it, but the weight of it feels quite balanced in the hand, so it isn't top or bottom-heavy. On the front there is the DWARFLAB logo which is quite small and there are no other markings on it. The tripod offers full 360° rotation of the motorized base, which allows for tracking for the time-lapse mode, but also for the 90-second captures of nearer objects in the sky, such as the Sun or the moon. Usage To get started, simply power on the DWARF mini and open the DWARFLAB app, tap on Connect, and it will scan for the DWARF mini over the Wi-Fi network. The device supports both 2.4 GHz and 5 GHz Wi-Fi, as well as Bluetooth for discovery, so connection issues were minimal in my experience with it. As previously noted in the specs, the DWARF mini will stay connected with a phone or tablet up to 15 meters in an open environment, such as a backyard. Lighting status Powering on: The green circular light will rotate and breathe in turn Powering off: The red circular light is gradually extinguished Connecting: Green light strip rotating Connected: Green light strip solid/always on 4 lights 1= 0-25%, 2= 25-50%, 3= 50-75%, 4= 75-100% battery power To view the full lighting status, such as tracking mode and connection failure, you can check the user guide on the official DWARFLAB page. DWARFLAB app Above, you can see the steps undertaken to connect the DWARFLAB app to my Galaxy S26 Ultra. Weirdly, I got an alert that a firmware update failed to get uploaded to the DWARF mini the first time, but upon retrying, it worked. Then place the DWARF mini outside, make sure your smartphone or tablet is connected to it, and then head back inside, because you can manage it from the comfort of your home. Simply enter the Atlas tab in the app and search for what you want to capture, and then tap on the camera icon; the DWARF mini will then attempt to track the object and give you a live view right on your connected device. Results I've had the DWARF mini since April, but even though my garden is south-facing, I had a lot of trouble trying to capture a good image of the moon. In the end, it was possible after I took it with me on a trip to my parents in Southend, UK, at the end of May. Here is a capture of the moon, resulting from 20 stacked images over a 90-second exposure. What you are seeing here is not AI-assisted. A good example of what I mean is the latest flagships with their 200MP cameras claiming to capture things like closeups of the moon, and while they are not as good as the above example on the DWARF mini, the resulting image on smartphones is actually AI-assisted above 30X zoom. Here is an example of a similar shot at the moon at 200X zoom using an HONOR Magic8 Pro. The difference is clear. Next, here we have a shot of the daytime moon. Here is a shot of Arcturus, the red giant star, which is the fourth brightest in the night sky. As previously mentioned, it could be a bit clearer, but clouds passing in front of it muddied the shot a bit. The Sun The DWARF mini also ships with a sun filter, meaning you can take great shots of the sun as well. Tracking Sun Resulting (stacked) shot Live zoom The pictures themselves are limited to Full HD, and some of the examples actually came out in HD (1280x720), but this is because the standard telescopic result is in 720p while "Wide" is in 1080p. Above you can see how in the app the Sun is tracked, the resulting capture, and Live zoom. I have only scratched the surface of what is possible with this telescope; I found several examples online of shots of the Milky Way, among others, such as nebulae and galaxies. All of this requires patience and knowledge, although if you know what you are looking for, simply enter it in the Atlas tab in the DWARFLAB app, tap the camera icon, and the telescope will attempt to track it. Conclusion The good The DWARF mini definitely places itself in a price point that makes astrology accessible to anyone looking to get started in the hobby. Say you want to have a closer look at the moon, simply enter it in the Atlas, and the Live view also lets you zoom in and snap pictures. The bad Some issues I came across while operating the DWARF mini were that it sometimes failed to connect unless I held my smartphone right next to it, and finding and tracking sometimes took several attempts to get it calibrated. I discovered that it helped if I sort of positioned and pointed the telescope in the general area it was supposed to detect, but this obviously wouldn't work with objects you can't see with the naked eye; more testing is required for that. Another bit of advice is to ensure that the lens is clean. While making the examples of live zooming on the sun, I discovered that the telescope lens and sun filter were not completely clean, and only after cleaning with a microfiber cloth was I able to get a decent shot of the sun. Where to buy and a coupon Okay, $399 is not cheap for a side hobby, but nor is a $1,500 smartphone flagship that you'll most likely have for a couple of years. This is a one-time entrance into astrology, and it won't become obsolete in one year like a smartphone. It's a thumbs up from me. The DWARF mini is available to buy right now in the U.S. and U.K. at the links below. DWARF mini for $399 on the official site DWARF mini for $399 on Amazon U.S. Use the NEOWIN5OFF coupon code for an additional 5% off at checkout (expires June 21) As an Amazon Associate, I earn from qualifying purchases.
    • Adobe Acrobat Reader Dis Continued
    • The name, you mean? If so, it's actually the objects common name. There's another one called NGC 7293 which is also known as Helix Nebula (because we're looking at a helix structure top down) but other times also known as the Eye of God. You'll understand when you see it
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      271
    3. 3
      Skyfrog
      75
    4. 4
      +Edouard
      71
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!