Recommended Posts

FAA backup dates and times

https://www.fly.faa.gov/adv/adv_spt.jsp

SPACE-X STARSHIP OFT-3, BOCA CHICA, TX PRIMARY:

03/14/24 1200Z-1431Z 

BACKUP:

03/15/24 1200Z-1431Z 

03/16-17 1200Z-1301Z 

03/18/24 1200Z-1431Z

 

 

On 13/03/2024 at 13:29, DocM said:

Game On

FTS is ready, and BocaChicaGal (NSF photographer) got her evacuation notice.

Winds may be a problem, time will tell.

Local sunrise is 38 minutes after the window opening, so it may be Starship's first night launch.

evacuation notice for when?

On 13/03/2024 at 13:46, Warwagon said:

evacuation notice for when?

It appears to be for tomorrow (Thursday) morning.  The FAA just released their impact assessment for the landing zone in the Indian Ocean, so the official launch license should be approved any time now.
I'm a little surprised that they'd go from license approval to full-send within less than a day, but I guess the rocket is on the pad and ready to launch as we speak.  Let's light this candle!

The main constraint is now weather.

FAA Statement on SpaceX Starship OFT-3 License Modification Approval (March 13, 2024)


The FAA is authorizing the Space Starship Super Heavy Orbital Flight Test 3 (OFT-3) launch. The FAA determined SpaceX met all safety, environmental, policy and financial responsibility requirements.

As part of the license modification evaluation, the FAA prepared a Tiered Environmental Assessment for SpaceX Starship Indian Ocean Landings and issued a Finding of No Significant Impact/Record of Decision.

The license applies to all phases of the proposed OFT-3 operation. This includes preflight preparations and liftoff from Texas, the water landing of the Super Heavy booster in the Gulf of Mexico, and the water landing of the Starship vehicle in the Indian Ocean.
 

 

On 14/03/2024 at 15:45, Xenon said:

If anyone heard a giant kaplunk it was the booster hitting the gulf. It looks like it hit the water at around 1111 km/h, or about 690 mph. 

That's 0.899 the speed of sound or just under Mach 1 (1234,8 km/h)

From my extremely amateur space flight eyes, it seems like Starship was a little out of control on it's way down.  Maybe the same thing with the booster?

I'm also curious why they didn't attempt a relight in space and if the fuel on both is supposed to be so empty? (I'm assuming it just looks a lot emptier than it actually is in their video.  Very possible it had plenty to land).  Did the camera also show some debris in one of Starships tanks?

 

On 14/03/2024 at 10:45, Xenon said:

If anyone heard a giant kaplunk it was the booster hitting the gulf. It looks like it hit the water at around 1111 km/h, or about 690 mph. 

Where did you see that?

On 14/03/2024 at 10:50, bguy_1986 said:

From my extremely amateur space flight eyes, it seems like Starship was a little out of control on it's way down.  Maybe the same thing with the booster?

 

During entry ship uses the  fins to do rolls, so seeing it go side to side is expected. By varying all four fins in different directions it can do roll, pitch, and yaw with just four non-wing surfaces.

 

On 14/03/2024 at 10:50, bguy_1986 said:

I'm also curious why they didn't attempt a relight in space and if the fuel on both is supposed to be so empty? (I'm assuming it just looks a lot emptier than it actually is in their video.  Very possible it had plenty to land).  Did the camera also show some debris in one of Starships tanks?

 

Starting up the Raptor would have added velocity, and they were running out of Landing zone. They didn't want it to land or debris to fall outside of that zone. During the webcast they said this was pre-programmed.

 

On 14/03/2024 at 10:50, bguy_1986 said:

Where did you see that?

 

When booster tried to do the landing burn it looked like there were some very severe grid fin rotations, indicating they didn't have enough control authority. They can fix that. File under "why we test"

The resultant dreideling probably sloshed propellants away from the intakes, which could be the cause of some engines not starting.

On the other hand

The pez dispenser door opened and closed

Propellant transfer was initiated, and at some point the computer signaled a completion of the test. Data will tell if the propellant volume transferred was sufficient.

All in all, a pretty successful test flight.

As mentioned earlier, the Flight 4 booster and vehicle are already built and in testing flow. 

SpaceX and FAA are talking as many as 10 total flights this year, depending on how they go. Five with belly flop, 5 would try to do soft landings on the water.

 

Edited by DocM
  • Like 1
On 14/03/2024 at 11:07, DocM said:

 

When booster tried to do the landing burn it looked like there were some very severe grid fin rotations, indicating they didn't have enough control authority. They can fix that. File under "why we test"

 

I have a hard time reading sometimes.  I thought @Xenon was talking about Starship yet. 

FTS wouldn't have blown the ship up after engines didn't relight?  (I have no idea how close it is to earth when it needs to relight).

On 14/03/2024 at 14:11, bguy_1986 said:

I have a hard time reading sometimes.  I thought @Xenon FTS wouldn't have blown the ship up after engines didn't relight?  (I have no idea how close it is to earth when it needs to relight).

They usually safe the FTS during landings. Don't want to blow up the landing structures more than just a fuel  conflagration. Both ship and booster have two quite large charges.

I think the loss of control authority by the grid fins is why the booster looked like it was driedeling down to the Landing zone. That kind of eccentric roll usually takes propellant away from the engine intake manifold.

Edited by DocM
  • Like 1

The ship looked to be tumbling the whole time after it left the booster. Even coming through the atmosphere it looked to roll onto the not shielded side. Im guessing some work on the ship control will result it a much better return to earth.

  • Like 1
On 14/03/2024 at 21:53, IsItPluggedIn said:

The ship looked to be tumbling the whole time after it left the booster. Even coming through the atmosphere it looked to roll onto the not shielded side. Im guessing some work on the ship control will result it a much better return to earth.

They've been experimenting with using ullage gas, evaporated propellant used to pressurize the tanks, expelled through nozzles for a reaction control system. It would save a ton of weight, but they may have to go back to either high pressure cold gas (used on Falcon 9) or hot pressure fed thrusters.

They have them in the inventory, and most of their thrusters are 3D printed.

Starship v3 will be a #&\>#]# beast

 

Let's just think about this for a minute,

Max payload of Starship V1 in expendable mode (like the other rockets) is ~200 tons.
|
V3 is expected to be ~200 tons with full reusability and ~400 tons expendable. Length will grow by 20 to 30 meters and thrust to ~10k tons.

v2 should be in production this year, v3 a bit later.

v1 Starship was said to be able to carry cargo 10,000 km without using a booster. Clearly, v3 will exceed this by having nine engines instead of six and more propellant.

Starship is one of the vehicles being looked at by Space Force for their point-to-point delivery program (P2PD); military supplies when needed fast, or  emergency supplies in disaster zones. 

Also of interest, Sierra Space (Dream Chaser spaceplane) has announced Ghost, a small cargo delivery vehicle which could be dropped from orbit and land with precision. 

A dropship.

Load a mess of Ghosts into a Starship and spit them out over the zone where they are needed.

Robert A. Heinlein would love this.

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • I think it depends on what you're looking for to do, and the time you have to spare. With my Dwarf 3, I easily spend 3-4 hour sessions; half an hour driving to an un-light polluted place, unpacking and setting up the smart scope + tripod for equatorial tracking, mucking around with settings, maybe shoot some calibration frames, spending a few hours shooting, merging with past photo sessions, etc. It's crazy how time flies and I often get home later than I expected. It's something I still need to set aside a good part of an evening to do, all in all. For one session, where you often need like four for best results when it comes to deep space objects. With practice, I can probably begin cutting time here but I think where smart scopes find their home is among people who love to shoot the night sky but don't have the spare time to go deep with the "navigator level" attunement to the night sky itself. Having said this, _if_ you have even more time to spend on this hobby, it will probably be even more rewarding to do it more by hand and learn the skies and the details of how it all works.
    • I misread the title and thought Teams itself would be redesigned. Imagine having this one as a native WinUI app.
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame by Sayan Sen Last month Neowin reported on a major issue on Dell systems wherein a bug in its official support tool was leading to endless blue screen of death (BSOD) and restarts. Following our report, Dell officially acknowledged its SupportAssist-related crash issue, confirming that the culprit is not Microsoft's operating system but rather a faulty version of its own remediation software. In a newly published support advisory, Dell stated that version 5.5.16.0 of Dell SupportAssist Remediation and Alienware SupportAssist Remediation can trigger blue screen errors and unexpected system restarts. The company notes that the problematic component operates independently of the main SupportAssist application, meaning users should not remove the primary SupportAssist software when troubleshooting the issue. According to Dell, the crashes are linked specifically to the SupportAssist Remediation service, which is bundled with SupportAssist OS Recovery Tools, and as such it has since released an updated version, 5.5.16.1, which is said to resolve the problem. Affected users are advised to first verify whether version 5.5.16.0 is installed by checking the Installed Apps section in Windows Settings. If so, Dell recommends updating SupportAssist OS Recovery Tools through either SupportAssist's "Update Software" feature or Dell Command Update. Dell also advises users to back up important data before performing the update and to ensure systems remain connected to power throughout the installation process. If you are still having issues though make sure to report to the Dell support forum. As it turns out though Dell is not the only PC maker currently dealing with update-related headaches as HP is also facing a separate but probably equally frustrating issue involving recent Windows Secure Boot updates that were released with recent Windows 11 Patch Tuesdays. Similar to Dell, HP also put up its own support article where it explains the issue. The company says that affected devices could hit a brick wall when booting as they run into a BitLocker recovery loop after the April 2026 updates. The problem appears to affect systems wherein the new UEFI Secure Boot CA 2023 certificates fail to apply properly. As such affected users will find themselves entering their recovery key over and over again despite the system otherwise functioning normally. HP says such PCs should be updated to the latest available BIOS version and configured with the necessary Secure Boot certificates before installing Microsoft's Windows 11 Patch Tuesday updates. Systems that are already experiencing the problem may require BIOS configuration changes to restore normal boot behavior. Admins can find information regarding that in the support article here on HP's official website.
    • Getting further away from the artistic study of mental disease that was the first game... (which never needed any sequels to begin with) But I get it, a company has to make money. And the second was at least visually impressive, if not in any other way.
    • If its the devs fault you would think Unreal would help M$ take full advantage of Unreal and work with them to fix the performance issues. Otherwise they are catching unwarranted bad press.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!