Recommended Posts

Meanwhile Honda just had a successful reusable rocket test, should be a thread about them and not this maniacal maniacs madness

https://interestingengineering.com/space/honda-stuns-world-with-reusable-rocket-launch

  • 1 month later...
On 19/06/2025 at 11:24, Som said:

Meanwhile Honda just had a successful reusable rocket test, should be a thread about them and not this maniacal maniacs madness

https://interestingengineering.com/space/honda-stuns-world-with-reusable-rocket-launch

SpaceX Falcon 9 has over 500 orbital launches, the vast majority of them reused. They launch more frequently, more tonnage,  and for a lower price than any other space company or agency in the world. They also run the largest satellite communications network in the world, and are building and  launching the largest satellite networks for the US military and reconnaissance agencies with other partners. Only a few idiots here are unimpressed. 

------

Grok reports

"Starship Version 3 full stack measures ~150m in height (up from ~121m in V1) and retains a 9m diameter. Engine bay upgrades include 35 Raptor 3 engines on the booster (vs. 33 prior) and 9 on the ship (vs. 6), with redesigned plumbing for better fuel flow, heat shielding, and thrust vectoring."

Height: 492' 1.512"

Diameter: 29'  6.331"

 

 

 

20250814_173749.jpg

 

Rocket engine primer & Raptor 3 test

 

Edited by DocM
On 15/08/2025 at 00:27, DocM said:

SpaceX Falcon 9 has over 500 orbital launches, the vast majority of them reused. They launch more frequently and for a lower price than any other space company or agency in the world. Only a few idiots here are unimpressed. 

------

Grok reports

"Starship Version 3 full stack measures ~150m in height (up from ~121m in V1) and retains a 9m diameter. Engine bay upgrades include 35 Raptor 3 engines on the booster (vs. 33 prior) and 9 on the ship (vs. 6), with redesigned plumbing for better fuel flow, heat shielding, and thrust vectoring."

 

 

 

20250814_173749.jpg

meh , I might care about SpaceX if its owner wasn’t a total bollocks but my petty side actually hopes he crashes harder than any rocket because he makes space travel impossible to admire.

On 14/08/2025 at 19:54, Som said:

meh , I might care about SpaceX if its owner wasn’t a total bollocks but my petty side actually hopes he crashes harder than any rocket because he makes space travel impossible to admire.

The financial side won't give you any hope. Tesla is worth $1 trillion, SpaceX $400 million and rapidly increasing. Some recent economic studies put SpaceX at $2-4 trillion by 2040. It frequently beats the estimates and is the largest privately held company. 

When thinking about this keep in mind that SpaceX is not run by Musk, it is run by company President Gwen Shotwell. As aerospace engineers go, she's an ace.

The Starbase General Manager is Kathy Lueders, formerly a NASA Associated Administrator Space Operations Mission Directorate  (in charge of the US human spaceflight program).

Who flies most of the astronauts? SpaceX's Dragon. They even fly Russian Cosmonauts and other International astronauts.

They  even rescued 2 astronauts when their broke down spaceship can't be trusted to bring them home

Edited by DocM
On 21/08/2025 at 08:19, SALSN said:

The shuttle tiles were a huge pain with enormous refurbishing costs, so SpaceX is deliberately not trying to copy the shuttle tech.

And instead make something that, at its most basic, just won't work? 

How smart of them... To redesign something that NEVER failed, into something that will, and does, just completely fail... 

On 22/08/2025 at 07:25, FloatingFatMan said:

And instead make something that, at its most basic, just won't work? 

How smart of them... To redesign something that NEVER failed, into something that will, and does, just completely fail... 

First of all, the starship has made it successfully through the atmosphere more than once
Second, it is still in development. SpaceX is doing an iterative approach to hardware development, which means they test and refine, so you can expect the systems to get better, just like how the falcon 9 booster has gone through a myriad of iterations ultimately taking it from an expendable booster to one that now can fly over 20 missions.

Third, the tiles of the shuttle did fail, twice, one time they got lucky and the shuttle survived, the other time not so much...

On 22/08/2025 at 06:49, SALSN said:

First of all, the starship has made it successfully through the atmosphere more than once
Second, it is still in development. SpaceX is doing an iterative approach to hardware development, which means they test and refine, so you can expect the systems to get better, just like how the falcon 9 booster has gone through a myriad of iterations ultimately taking it from an expendable booster to one that now can fly over 20 missions.

Third, the tiles of the shuttle did fail, twice, one time they got lucky and the shuttle survived, the other time not so much...

The TILES never failed. In both incidences they were damaged by external impact.

And they're never going to "iterate" past the fundamental flaw of embedding steel plates INSIDE the tiles.  A material with a different heat expansion rate than the tile itself and which, as Thunderfoot clearly showed, damages the tiles from within.  NASA glues those tiles on for a REASON.

Then there's the water absorption issue, which can be fixed but should never have happened in the first place... 


Only fools "iterate" at a large scale like this.  Smart people shouldn't even NEED to iterate this basic stuff.  Thermal expansion and water absorption of materials is basic high school stuff ffs... I covered stuff like that when I was 11...

  • Like 2
On 22/08/2025 at 08:25, FloatingFatMan said:

The TILES never failed. In both incidences they were damaged by external impact.

And they're never going to "iterate" past the fundamental flaw of embedding steel plates INSIDE the tiles.  A material with a different heat expansion rate than the tile itself and which, as Thunderfoot clearly showed, damages the tiles from within.  NASA glues those tiles on for a REASON.

Then there's the water absorption issue, which can be fixed but should never have happened in the first place... 


Only fools "iterate" at a large scale like this.  Smart people shouldn't even NEED to iterate this basic stuff.  Thermal expansion and water absorption of materials is basic high school stuff ffs... I covered stuff like that when I was 11...

The tiles were damaged which lead to failure, so they failed, but sure their thermal properties were probably fine.

Iteration means if the current approach is not sound, then they will change it.

I'm not a domain expert on any of this stuff, but I would expect that SpaceX have a few of those that have ideas of how this is supposed to work that are not public, If not it is even more impressive that they have gotten as far as they have.

In any case, it is interesting how the fools are the ones dominating the launch industry, I think we must have different definitions of "fools".

On 22/08/2025 at 07:47, SALSN said:

The tiles were damaged which lead to failure, so they failed, but sure their thermal properties were probably fine.

ANYTHING can fail if subjected to external damage.  SpaceX tiles, on the other hand, can fail from WITHIN because of major design flaws. That's a serious problem you can't fix without going back to the drawing board. NASA's original designs worked perfectly, but noooooo.... Musk and his crew know "better".

 

On 22/08/2025 at 07:47, SALSN said:

Iteration means if the current approach is not sound, then they will change it.

And competent engineers not only don't design stupidly from the outset, they also iterate at a small scale first. This applies to all kinds of engineering, physical, mechanical, nuclear, software. It's all engineering and it all has basic fundamentals that you follow.

 

On 22/08/2025 at 07:47, SALSN said:

I'm not a domain expert on any of this stuff, but I would expect that SpaceX have a few of those that have ideas of how this is supposed to work that are not public, If not it is even more impressive that they have gotten as far as they have.

In any case, it is interesting how the fools are the ones dominating the launch industry, I think we must have different definitions of "fools".

They're "dominating" because NASA has been seriously underfunded for decades. Plus, there's no way the public would stand for SpaceX's number of failures if it were NASA doing it; even though SpaceX is getting massive amounts public funding (without which it would have already gone bankrupt). Government entities don't generally get away with failing like private entities do.

 

  • Like 2

We are about 4 hours away from the open on the Starship test flight 10 window. Maybe it won't blow up this time! At least not until it is supposed to.

A fair amount of work went into solving the issues of the past flights, but not a ton to be honest. This flight and the next are still the "old" design and so we aren't even attempting to catch the booster. Main goals of flight 10 are to test some of the sat deployment mechanisms since we have been a tad unsuccessful at doing that the past three flights. :) Should make for some pretty colors in any case.

On 24/08/2025 at 20:06, rdlenk said:

We are about 4 hours away from the open on the Starship test flight 10 window. Maybe it won't blow up this time! At least not until it is supposed to.

A fair amount of work went into solving the issues of the past flights, but not a ton to be honest. This flight and the next are still the "old" design and so we aren't even attempting to catch the booster. Main goals of flight 10 are to test some of the sat deployment mechanisms since we have been a tad unsuccessful at doing that the past three flights. :) Should make for some pretty colors in any case.

 

hopefully this one goes well. I do dislike these later launches with me being in the UK, 12.30am. Can't see me still being awake then. 

SpaceX is now aiming to launch its Starship Flight 10 test mission on Monday (Aug. 25) at 7:30 p.m. EDT (2330 GMT) after a one-day delay.

https://www.space.com/space-exploration/launches-spacecraft/spacex-starship-flight-10-launch-what-time

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Kdenlive 26.04.2 by Razvan Serea Kdenlive is an acronym for KDE Non-Linear Video Editor. It works on GNU/Linux, Windows and BSD. Through the MLT framework, Kdenlive integrates many plugin effects for video and sound processing or creation. Furthermore Kdenlive brings a powerful titling tool, a DVD authoring (menus) solution, and can then be used as a complete studio for video creation. Kdenlive supports all of the formats supported by FFmpeg or libav (such as QuickTime, AVI, WMV, MPEG, and Flash Video, among others), and also supports 4:3 and 16:9 aspect ratios for both PAL, NTSC and various HD standards, including HDV and AVCHD. Video can also be exported to DV devices, or written to a DVD with chapters and a simple menu. Video editing features: Multi-track editing with a timeline and supports an unlimited number of video and audio tracks. A built-in title editor and tools to create, move, crop and delete video clips, audio clips, text clips and image clips. Ability to add custom effects and transitions. A wide range of effects and transitions. Audio signal processing capabilities include normalization, phase and pitch shifting, limiting, volume adjustment, reverb and equalization filters as well as others. Visual effects include options for masking, blue-screen, distortions, rotations, colour tools, blurring, obscuring and others. Configurable keyboard shortcuts and interface layouts. Rendering is done using a separate non-blocking process so it can be stopped, paused and restarted. Kdenlive also provides a script called the Kdenlive Builder Wizard (KBW) that compiles the latest developer version of the software and its main dependencies from source, to allow users to try to test new features and report problems on the bug tracker. Project files are stored in XML format. An archiving feature allows exporting a project among all assets into a single folder or compressed archive. Built-in audio mixer Kdenlive 26.04.2 changelog: Remove not needed actions from render info, fix rough size calculation for rendering. Fix clip sometimes not inserted in timeline when moving vertically in bin drag. Fix transcoding from clip properties. Cleanup render profile audio quality. Use percent based value for audio quality, and adjust the range accordingly per codec. Fixes bug #520750 Enforce even numbers for render width/height. Fixes bug #520737 Fix nightly flatpak - disable rnnoise until implemented. Fix missing initialization. Edit mediacapture.cpp. Fix document unnecessarily marked as modified on opening, triggering a backup request. Fix incorrect detection of missing and remote clips causing unwanted backups. Fixes issue #2194 Fix tests. Fix tmp files copied to wrong location when setting project folder. Fixes bug #467740 Fix color clips not selected on creation. Use QFileInfo instead of QUrl/QDir to try fixing Windows shared drives. Fixes bug #451413 Fix timeline preview incorrectly invalidated when a track with effect duration changed. Fixes bug #514541 Fix missing var. Display paths in native format in render widget. Fixes bug #520428 Simple splash: fix pressing return always triggered the same button. Minor update to simple splash. Fix unwanted clips added to timeline and cleanup. Fixes issue #2190 Minor layout improvements to welcome screen, add Quit and Open shortcuts. Fix broken welcome dialog layout in tiling compositors. (craft) Limit the number of CPU cores used during a Windows build with mingw as some .cpp files are memory intensive to build. (kde-ci) Limit the number of CPU cores used during a build as some .cpp files are memory intensive to build. (kde-ci) Cleanup old entries. Another fix for animation crash. Fix uninitialized function - crash on create animation. Another attempt to fix MacOS permissions. MacOS: fix bundle release version. Fix MacOS plist path. Fix MacOS build. Explicitely link against Qt::Core. Download: Kdenlive 26.04.2 | 128.0 MB (Open Source) Download: Standalone Executable View: Kdenlive Home page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Here's how to watch the Xbox Games Showcase today and what to expect by Pulasthi Ariyasinghe The June games showcase week has been a packed one, with everything from major presentations like Sony and Summer Game Fest to indie-focused reveals coming in almost every day. Now, it's almost time for another big one, with Microsoft bringing its Xbox Games Showcase back later today. This is a double feature too, with a Gears of War E-Day deep dive also being attached to it. For anyone wanting to tune in online, the 2026 Xbox Games Showcase is kicking off at 10 AM PT | 1 PM ET | 6 PM BST | 7 PM CEST later today, June 7. The event will be available to watch on the official Xbox YouTube (4K 60FPS), Twitch, Facebook, Steam, Amazon Live, and other portals. Separate livestreams for American Sign Language and Audio Description will also be available. "This year marks 25 years of XBOX, and this Showcase is poised to be a true celebration, offering world premieres, new gameplay, fresh updates, and more for a swathe of projects we cannot wait to share," said Microsoft about this presentation. With a new CEO behind it that is pulling off some interesting moves, Xbox may have some surprises to reveal today. New looks at first-party games like Halo Campaign Evolved from Halo studios, Fable from Playground Games, InXile Entertainment's Clockwork Revolution, Mojang's Minecraft Dungeons II, and Call of Duty: Modern Warfare 4 from Infinity Ward are to be expected here. We may finally get to see the new Blade from Arcane Studios in action and a new Persona game from Atlus at the showcase too. Surprise announcements may also arrive from other Microsoft-owned studios like Bethesda, MachineGames, Ninja Theory, Obsidian, Rare, World's Edge, or Blizzard. Considering how every new release nowadays is staying away from November and December to avoid Grand Theft Auto VI's release, any launch dates Microsoft announces will probably skip those months as well. Once the Xbox Games Showcase ends, Microsoft will immediately kick off the Gears of War: E-Day Direct. This deep dive into the upcoming prequel from The Coalition should attach gameplay footage and perhaps a release window to the highly anticipated project.
    • People in the '50s and '60s had the same attitude, and we're still here over a half century later.
    • So after some fiddling I was able to get it to run at a pretty stable 30FPS. I'm slightly surprised about how much fiddling I had to do to get there though given what I thought was reasonable hardware: Processors: 16 × AMD Ryzen 7 7840HS w/ Radeon 780M Graphics Memory: 16 GiB of RAM Graphics Processor 1: AMD Radeon 780M Graphics Graphics Processor 2: AMD Radeon RX 7700S I think I could do it better if I use Linux rather than Windows, Windows RAM usage is stupid without stripping the system down. But once I got it working in a reasonable state, it was so awesome! I felt like a new Bond! If anyone has any advice to get things going a bit smoother FPS-wise, I'd appreciate it.
    • Something is rotten in the state of Denmark Australia
  • Recent Achievements

    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      PsYcHoKiLLa
      256
    3. 3
      Steven P.
      74
    4. 4
      +Edouard
      70
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!