Recommended Posts

Meanwhile Honda just had a successful reusable rocket test, should be a thread about them and not this maniacal maniacs madness

https://interestingengineering.com/space/honda-stuns-world-with-reusable-rocket-launch

  • 1 month later...
On 19/06/2025 at 11:24, Som said:

Meanwhile Honda just had a successful reusable rocket test, should be a thread about them and not this maniacal maniacs madness

https://interestingengineering.com/space/honda-stuns-world-with-reusable-rocket-launch

SpaceX Falcon 9 has over 500 orbital launches, the vast majority of them reused. They launch more frequently, more tonnage,  and for a lower price than any other space company or agency in the world. They also run the largest satellite communications network in the world, and are building and  launching the largest satellite networks for the US military and reconnaissance agencies with other partners. Only a few idiots here are unimpressed. 

------

Grok reports

"Starship Version 3 full stack measures ~150m in height (up from ~121m in V1) and retains a 9m diameter. Engine bay upgrades include 35 Raptor 3 engines on the booster (vs. 33 prior) and 9 on the ship (vs. 6), with redesigned plumbing for better fuel flow, heat shielding, and thrust vectoring."

Height: 492' 1.512"

Diameter: 29'  6.331"

 

 

 

20250814_173749.jpg

 

Rocket engine primer & Raptor 3 test

 

Edited by DocM
On 15/08/2025 at 00:27, DocM said:

SpaceX Falcon 9 has over 500 orbital launches, the vast majority of them reused. They launch more frequently and for a lower price than any other space company or agency in the world. Only a few idiots here are unimpressed. 

------

Grok reports

"Starship Version 3 full stack measures ~150m in height (up from ~121m in V1) and retains a 9m diameter. Engine bay upgrades include 35 Raptor 3 engines on the booster (vs. 33 prior) and 9 on the ship (vs. 6), with redesigned plumbing for better fuel flow, heat shielding, and thrust vectoring."

 

 

 

20250814_173749.jpg

meh , I might care about SpaceX if its owner wasn’t a total bollocks but my petty side actually hopes he crashes harder than any rocket because he makes space travel impossible to admire.

On 14/08/2025 at 19:54, Som said:

meh , I might care about SpaceX if its owner wasn’t a total bollocks but my petty side actually hopes he crashes harder than any rocket because he makes space travel impossible to admire.

The financial side won't give you any hope. Tesla is worth $1 trillion, SpaceX $400 million and rapidly increasing. Some recent economic studies put SpaceX at $2-4 trillion by 2040. It frequently beats the estimates and is the largest privately held company. 

When thinking about this keep in mind that SpaceX is not run by Musk, it is run by company President Gwen Shotwell. As aerospace engineers go, she's an ace.

The Starbase General Manager is Kathy Lueders, formerly a NASA Associated Administrator Space Operations Mission Directorate  (in charge of the US human spaceflight program).

Who flies most of the astronauts? SpaceX's Dragon. They even fly Russian Cosmonauts and other International astronauts.

They  even rescued 2 astronauts when their broke down spaceship can't be trusted to bring them home

Edited by DocM
On 21/08/2025 at 08:19, SALSN said:

The shuttle tiles were a huge pain with enormous refurbishing costs, so SpaceX is deliberately not trying to copy the shuttle tech.

And instead make something that, at its most basic, just won't work? 

How smart of them... To redesign something that NEVER failed, into something that will, and does, just completely fail... 

On 22/08/2025 at 07:25, FloatingFatMan said:

And instead make something that, at its most basic, just won't work? 

How smart of them... To redesign something that NEVER failed, into something that will, and does, just completely fail... 

First of all, the starship has made it successfully through the atmosphere more than once
Second, it is still in development. SpaceX is doing an iterative approach to hardware development, which means they test and refine, so you can expect the systems to get better, just like how the falcon 9 booster has gone through a myriad of iterations ultimately taking it from an expendable booster to one that now can fly over 20 missions.

Third, the tiles of the shuttle did fail, twice, one time they got lucky and the shuttle survived, the other time not so much...

On 22/08/2025 at 06:49, SALSN said:

First of all, the starship has made it successfully through the atmosphere more than once
Second, it is still in development. SpaceX is doing an iterative approach to hardware development, which means they test and refine, so you can expect the systems to get better, just like how the falcon 9 booster has gone through a myriad of iterations ultimately taking it from an expendable booster to one that now can fly over 20 missions.

Third, the tiles of the shuttle did fail, twice, one time they got lucky and the shuttle survived, the other time not so much...

The TILES never failed. In both incidences they were damaged by external impact.

And they're never going to "iterate" past the fundamental flaw of embedding steel plates INSIDE the tiles.  A material with a different heat expansion rate than the tile itself and which, as Thunderfoot clearly showed, damages the tiles from within.  NASA glues those tiles on for a REASON.

Then there's the water absorption issue, which can be fixed but should never have happened in the first place... 


Only fools "iterate" at a large scale like this.  Smart people shouldn't even NEED to iterate this basic stuff.  Thermal expansion and water absorption of materials is basic high school stuff ffs... I covered stuff like that when I was 11...

  • Like 2
On 22/08/2025 at 08:25, FloatingFatMan said:

The TILES never failed. In both incidences they were damaged by external impact.

And they're never going to "iterate" past the fundamental flaw of embedding steel plates INSIDE the tiles.  A material with a different heat expansion rate than the tile itself and which, as Thunderfoot clearly showed, damages the tiles from within.  NASA glues those tiles on for a REASON.

Then there's the water absorption issue, which can be fixed but should never have happened in the first place... 


Only fools "iterate" at a large scale like this.  Smart people shouldn't even NEED to iterate this basic stuff.  Thermal expansion and water absorption of materials is basic high school stuff ffs... I covered stuff like that when I was 11...

The tiles were damaged which lead to failure, so they failed, but sure their thermal properties were probably fine.

Iteration means if the current approach is not sound, then they will change it.

I'm not a domain expert on any of this stuff, but I would expect that SpaceX have a few of those that have ideas of how this is supposed to work that are not public, If not it is even more impressive that they have gotten as far as they have.

In any case, it is interesting how the fools are the ones dominating the launch industry, I think we must have different definitions of "fools".

On 22/08/2025 at 07:47, SALSN said:

The tiles were damaged which lead to failure, so they failed, but sure their thermal properties were probably fine.

ANYTHING can fail if subjected to external damage.  SpaceX tiles, on the other hand, can fail from WITHIN because of major design flaws. That's a serious problem you can't fix without going back to the drawing board. NASA's original designs worked perfectly, but noooooo.... Musk and his crew know "better".

 

On 22/08/2025 at 07:47, SALSN said:

Iteration means if the current approach is not sound, then they will change it.

And competent engineers not only don't design stupidly from the outset, they also iterate at a small scale first. This applies to all kinds of engineering, physical, mechanical, nuclear, software. It's all engineering and it all has basic fundamentals that you follow.

 

On 22/08/2025 at 07:47, SALSN said:

I'm not a domain expert on any of this stuff, but I would expect that SpaceX have a few of those that have ideas of how this is supposed to work that are not public, If not it is even more impressive that they have gotten as far as they have.

In any case, it is interesting how the fools are the ones dominating the launch industry, I think we must have different definitions of "fools".

They're "dominating" because NASA has been seriously underfunded for decades. Plus, there's no way the public would stand for SpaceX's number of failures if it were NASA doing it; even though SpaceX is getting massive amounts public funding (without which it would have already gone bankrupt). Government entities don't generally get away with failing like private entities do.

 

  • Like 2

We are about 4 hours away from the open on the Starship test flight 10 window. Maybe it won't blow up this time! At least not until it is supposed to.

A fair amount of work went into solving the issues of the past flights, but not a ton to be honest. This flight and the next are still the "old" design and so we aren't even attempting to catch the booster. Main goals of flight 10 are to test some of the sat deployment mechanisms since we have been a tad unsuccessful at doing that the past three flights. :) Should make for some pretty colors in any case.

On 24/08/2025 at 20:06, rdlenk said:

We are about 4 hours away from the open on the Starship test flight 10 window. Maybe it won't blow up this time! At least not until it is supposed to.

A fair amount of work went into solving the issues of the past flights, but not a ton to be honest. This flight and the next are still the "old" design and so we aren't even attempting to catch the booster. Main goals of flight 10 are to test some of the sat deployment mechanisms since we have been a tad unsuccessful at doing that the past three flights. :) Should make for some pretty colors in any case.

 

hopefully this one goes well. I do dislike these later launches with me being in the UK, 12.30am. Can't see me still being awake then. 

SpaceX is now aiming to launch its Starship Flight 10 test mission on Monday (Aug. 25) at 7:30 p.m. EDT (2330 GMT) after a one-day delay.

https://www.space.com/space-exploration/launches-spacecraft/spacex-starship-flight-10-launch-what-time

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Halo: Campaign Evolved is out next month with new prequel missions by Pulasthi Ariyasinghe Microsoft offered a look at the upcoming Halo: Combat Evolved remake at the Xbox Games Showcase today. The Halo Studios-developed title is not only getting a fully remade campaign, but also new content in the form of a fresh story arc featuring Sgt. Johnson. Fans don't have to wait long, either, as Halo: Campaign Evolved is releasing next month. The new content joining the original campaign consists of three new missions that have the name "Operation: METEORITE" attached to the full project. Aside from ground-based combat, space missions are also included here. These prequel missions will take players to events set before the original campaign, where the Master Chief and Sgt. Johnson duo team up for a clandestine UNSC operation aboard a Covenant research vessel. The studio says that the story for these missions was written in collaboration with award-winning sci-fi author Troy Denning. "Operation: METEORITE gives players a chance to expand their experience with new locations, new enemy variants, more weapons from across the Halo series, and new ways to play within the Halo sandbox, all while getting to spend more time with beloved characters and witness a new event that adds to the legacy of their heroic history," adds Halo Studios. Today's new trailer showed off the game in action, including the new missions. Catch it below. Halo Campaign Evolved is coming out on July 28, 2026. It will be available across PC, Xbox Series X|S, and PlayStation 5 with a $49.99 price tag. A digital premium edition will also be available for $69.99, offering five days of early access, extra in-game skins, and a digital art collection. A $199.99 physical Collector's Edition is also incoming, bringing a Master Chief statue, a Cortana chip, a Steelbook case, and more.
    • To give context to everybody, I bought about 2 sets of RAM, ddr4, 3200, 64 gb, 2 years ago. It costed me 150 usd for each set. If you buy RAM now you only incentivate companies to sell you expensive stuff, as Nvidia did.
    • KillerPDF 1.4.2 by Razvan Serea KillerPDF is a lightweight, portable PDF editor for Windows built for users who want full control without subscriptions, installers, or telemetry. It runs as a single executable, making it ideal for USB use and field work. You can view PDFs with smooth PDFium rendering, navigate quickly with thumbnails, zoom, and shortcuts, and reorganize pages using drag-and-drop. It supports merging multiple PDFs, splitting documents, and extracting selected pages. KillerPDF also allows inline text editing with font matching to preserve the original layout, plus annotations like text boxes, freehand drawing, highlights, and reusable signatures. You can search full text, copy content easily, and print documents with flattened annotations. Designed as a free and open alternative to bloated PDF tools, it works fully offline on Windows 10/11 x64. No runtimes install. Everything needed is inside the EXE (targets .NET Framework 4.8, which ships with every supported Windows release). KillerPDF key features: High-quality PDF rendering via PDFium Edit PDF text inline (double-click to modify text) Page thumbnails and fast navigation with zoom and shortcuts Merge multiple PDFs into one Split PDFs and extract selected pages Drag-and-drop page reordering Font matching to preserve original document appearance Text boxes for notes Freehand drawing tools Highlight overlays with adjustable color, size, opacity Undo actions and clear per-page annotations Create, draw, and save reusable signatures Click-to-place signatures anywhere Full-text search with highlighted results Drag-select or Ctrl+A to copy text Print with annotations flattened Portable single-file app (~10 MB) No installer, no admin rights required No account, no telemetry KillerPDF 1.4.2 changelog: What's new PDF form filling. Interactive PDF forms now render their fields (text inputs, checkboxes, radio buttons) as live controls. Fill them in directly and save — field values are written back into the PDF. PDF outline (bookmark) navigation. A new OUTLINES tab in the sidebar displays the document's bookmark tree. Click any entry to jump to that page. The sidebar auto-fits its width to the longest entry on open and can be dragged wider; switching back to PAGES snaps to the pages-mode width. Fixed Page rotation no longer reverts after saving. Rotations applied via the sidebar context menu now persist correctly through the save pipeline. Copied text words were out of order on PDFs where glyphs are stored in non-reading order (Issue #66). Text extraction now sorts words by position and uses a dynamic line-grouping threshold so both drag-select and Select All produce correctly ordered output. PDFs with malformed or non-standard XRef tables now open in read-only mode instead of showing "Invalid entry in XRef table" and failing entirely. Download: KillerPDF 1.4.2 | 6.1 MB (Open Source) Link: KillerPDF Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • "...a low price of just $340..." I don't think it means what you think it means.
    • This Corsair Vengeance DDR5-6000 32GB RAM with RGB is a great deal for limited time by Sayan Sen Memory prices have been through the roof for a while, though it seems like things might finally be getting better. If you are in the market for one, then grab this Corsair Vengeance DDR5 32GB (2x16GB) DDR5 6000 CL36 kit with RGB for a low price of just $340 (purchase link under the specs table down below). The kit is compatible with both AMD and Intel systems as it supports both EXPO and XMP overclocking profiles, respectively. 6000 MT/s is often the sweet spot for many systems as it provides ample data transfer speed while still being on Gear 1 mode. This Vengeance variant has RGB so if you love bright setups with such lighting, this is a win-win for you. The technical specifications of the Corsair Vengeance memory kit are given in the table below: Specification Value Memory Type DDR5 Memory Size (Total) 32GB Kit Configuration 2 × 16GB Form Factor UDIMM (Desktop) Pin Count 288-pin Speed (Data Rate) 6000 MT/s Speed Rating PC5-48000 Tested CAS Latency 38-44-44-96 Voltage (Tested) 1.35V Performance Profile AMD EXPO & Intel XMP Heat Spreader Aluminum heatspreader Cooling Type Passive (Heatsink) Lighting Ten Zone RGB Software Support Corsair iCUE Get it at the link below: CORSAIR Vengeance RGB DDR5 32GB (2 x 16GB) 6000 CL38 – Gray (CMH32GX5M1E6000Z38): $339.99 (Sold and Shipped by Woot US, Fulfilled by Amazon US) This Woot deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      244
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      66
    5. 5
      Skyfrog
      65
  • Tell a friend

    Love Neowin? Tell a friend!