Desktop is connected, but does not show up in Router map


Recommended Posts

One of the desktops in our home network has the assigned address 192.168.1.4 and has a name of Cassie-PC, which responds via ping, but I need to setup parental controls on it (it's me niece's) and it does not show up in the network map through the router. I have physically checked the address assigned to the system, and it is clearly set to the .4 address, but it does not show up as an attached device in the router. Why is this, and what can I do to resolve it? For what's it worth I have checked and the cable is plugged directly to the router, prior it was plugged into a dumb switch. The desktop in question is able to access everything on the LAN as well as the internet.

241716340_networkmap.thumb.PNG.ebd479bd7b58ec582f6093898d11f55d.PNG

Hello,

 

I'm not particularly familiar with how Linksys does this, but could it be that the Cassie-PC host computer at 192.168.1.4 has a firewall on it which prevents the router from fingerprinting it?
 

I am thinking that as a work-around, you could try cloning the computer's MAC address, IP address and hostname onto one of the recognized devices, set up filtering for it on the router, and then restore that device's prior settings?  Again, I'm not sure if this would be effective, given that the Linksys router does not see the Cassie-PC computer, but perhaps once you have manually created an entry for it, the router will enforce the parental controls.

 

Just to confirm, you have visited Linksys to ensure you have the latest firmware?

 

Regards,

 

Aryeh Goretsky

  On 22/01/2019 at 02:34, goretsky said:

Hello,

 

I'm not particularly familiar with how Linksys does this, but could it be that the Cassie-PC host computer at 192.168.1.4 has a firewall on it which prevents the router from fingerprinting it?
 

I am thinking that as a work-around, you could try cloning the computer's MAC address, IP address and hostname onto one of the recognized devices, set up filtering for it on the router, and then restore that device's prior settings?  Again, I'm not sure if this would be effective, given that the Linksys router does not see the Cassie-PC computer, but perhaps once you have manually created an entry for it, the router will enforce the parental controls.

 

Just to confirm, you have visited Linksys to ensure you have the latest firmware?

 

Regards,

 

Aryeh Goretsky

Expand  

I will check into the MAC address, the firmware is up to date, as far for firewall, only the windows firewall is installed on that system.

Seems to be common across Linksys routers with this "feature."

 

Try power cycling the router

Try viewing the GUI in a different browser

You can try downgrading to the previous firmware and see if that solves it

 

However, it might be worth your while to look into 3rd party firmware if you cant get this to work fairly soon. Some users have reported to get it working again, only to have the issue pop up again randomly. If you are dead set on the Linksys firmware, you might want to look into other parental control solutions. I don't know of any myself, however I bet others here do.

Why can you not setup a reservation for the device on dhcp so its always .4 or set the device static on the PC... Then set the parental controls based upon the IP address?

 

If you setup a dhcp reservation for the PC mac address, it should be ALWAYS listed!!!

 

 

  On 22/01/2019 at 11:26, BudMan said:

Why can you not setup a reservation for the device on dhcp so its always .4 or set the device static on the PC... Then set the parental controls based upon the IP address?

 

If you setup a dhcp reservation for the PC mac address, it should be ALWAYS listed!!!

 

Expand  

That is the plan now, I was not aware that it was not setup (dhcp reservation) until late last night when I mentioned it to my brother-in-law, then we both realized that we never set her system up that way, we are going to correct the issue today.

OK, so apparently the desktop in question was on the DHCP reservation table, and I went ahead and gave it an assigned IP address of 192.168.1.4, but it still will not show up on the router, and the router has been reset, twice, so what else can I try?

Might be a long shot, but try reinstalling those drivers on the desktop. Or you could try it with a Live Linux CD/USB, and see if it shows up then. If it does, it's the ethernet port driver thats sending out bad info.

 

  On 22/01/2019 at 21:32, Mindovermaster said:

Might be a long shot, but try reinstalling those drivers on the desktop. Or you could try it with a Live Linux CD/USB, and see if it shows up then. If it does, it's the ethernet port driver thats sending out bad info.

 

Expand  

Odd since the system is brand new, but when I get a chance I will try to diagnose it further.

  On 22/01/2019 at 21:46, jnelsoninjax said:

Odd since the system is brand new, but when I get a chance I will try to diagnose it further.

Expand  

Odd is never a word when troubleshooting. The stupidest reason can be the answer... ;) 

  On 22/01/2019 at 21:21, jnelsoninjax said:

OK, so apparently the desktop in question was on the DHCP reservation table, and I went ahead and gave it an assigned IP address of 192.168.1.4, but it still will not show up on the router, and the router has been reset, twice, so what else can I try?

Expand  

You might not ever fix this, it seems like a ###### poor implementation from what I can gather. Search google for something as simple as "Linksys+Network Map+Missing Device" and you'll start seeing the threads I mentioned.

 

Try power cycling the router

Try viewing the GUI in a different browser

You can try downgrading to the previous firmware and see if that solves it

 

If none of that works, contact Linksys as this seems to be a firmware bug (I read this many times on the linksys forums).

Hello,


Oh, did you check to see if the computer is randomizing its MAC address on network connections with DHCP leases?  Perhaps that could interfere with fingerprinting by the router.

 

Regards,

 

Aryeh Goretsky

That their software doesn't allow you to assign policy based upon IP is just plain moronic... Since clearly whatever they are using for discovery of devices is junk..

 

As already mentioned a simple google shows that is a very common problem with their software.. If their discovery of devices on the local network is this flawed - why would you expect their control policies to work any better?

 

What exactly are you wanting to do and can prob point you to actual method that works ;)  Filter a machines internet access based upon what exactly?  No p0rn, no non approved sites? what?

 

Do you know how they discover devices?  Normally this would be done with arp, since even firewalls don't block answering arp.   A reservation for a MAC should force it to be listed.. As mentioned you sure the mac is correct in the dhcpd reservation?  Maybe that was setup for the devices wifi, and now your on wire?

 

Validate the devices mac address currently be used.. Windows simple ipconfig /all will show you this.. And then validate that mac is what is listed in your reservation on your router.

speaking as someone that owns a Linksys WRT1900AC I can tell you that their software and policy control is rather flaky; sometimes things work as expected and other times random features/policies just refuse.

 

I moved over to LEDE (now merged back into OpenWRT) and besides being much more stable I'm able to do more with it than I would have been able to.

I have a hard drive plugged in and shared locally and an Aria2 download server pointed to it running directly on the router now; built in ad blocking; and a few other things

  On 23/01/2019 at 13:59, BudMan said:

That their software doesn't allow you to assign policy based upon IP is just plain moronic... Since clearly whatever they are using for discovery of devices is junk..

 

As already mentioned a simple google shows that is a very common problem with their software.. If their discovery of devices on the local network is this flawed - why would you expect their control policies to work any better?

 

What exactly are you wanting to do and can prob point you to actual method that works ;)  Filter a machines internet access based upon what exactly?  No p0rn, no non approved sites? what?

 

Do you know how they discover devices?  Normally this would be done with arp, since even firewalls don't block answering arp.   A reservation for a MAC should force it to be listed.. As mentioned you sure the mac is correct in the dhcpd reservation?  Maybe that was setup for the devices wifi, and now your on wire?

 

Validate the devices mac address currently be used.. Windows simple ipconfig /all will show you this.. And then validate that mac is what is listed in your reservation on your router.

Expand  

It is setup in the DHCP reservation complete with MAC address filtering:

ShadzStore is the NAS

dhcp.thumb.PNG.8e36f10c6225f4d27702b86aeb8fc01b.PNG

Not sure how that answers my question.. Is the device that is not showing up actually using that mac?

 

That mac for 1.4 just comes back as ASUSTek COMPUTER INC., so is that the wireless or the wired nic?  And how is the device currently connected?

  On 24/01/2019 at 03:55, BudMan said:

Not sure how that answers my question.. Is the device that is not showing up actually using that mac?

 

That mac for 1.4 just comes back as ASUSTek COMPUTER INC., so is that the wireless or the wired nic?  And how is the device currently connected?

Expand  

The device is wired via cat5 to the router and the motherboard is an Asus, it does not show up in the network map, but as I showed, it does show (even MAC address) under DHCP reservations,

@Circaflex I tried to access the GUI via Edge, and it does not work at all (won't even load, no error, just does not connect)

  On 24/01/2019 at 11:47, jnelsoninjax said:

it does show (even MAC address) under DHCP reservations,

Expand  

And you actually validated this on the machine that that is the actual MAC??

 

it HAS to show the mac address on a reservation, since that is how it works!!  But for all we know someone set the static IP on the device to .4 and setup a reservation for wrong mac..   Maybe they setup that reservation for the wireless mac or something.

 

On the machine do a ipconfig /all and what does it show for the mac address?  For the interface currently being used?

 

macaddress.thumb.png.31c70b27cff8646c3b557ebf7924a377.png

 

Or maybe the mac is correct, but device is set static and never pulled the lease so the router doesn't think there a machine there because no lease was ever gotten for its reservation.  Does the device show dhcp is being used.. See I have it OFF on mine and IP is setup static..  

 

Do a ipconfig /release and then renew on the machine so your sure its pulling the lease from the router..

  On 24/01/2019 at 13:54, BudMan said:

And you actually validated this on the machine that that is the actual MAC??

 

it HAS to show the mac address on a reservation, since that is how it works!!  But for all we know someone set the static IP on the device to .4 and setup a reservation for wrong mac..   Maybe they setup that reservation for the wireless mac or something.

 

On the machine do a ipconfig /all and what does it show for the mac address?  For the interface currently being used?

 

macaddress.thumb.png.31c70b27cff8646c3b557ebf7924a377.png

 

Or maybe the mac is correct, but device is set static and never pulled the lease so the router doesn't think there a machine there because no lease was ever gotten for its reservation.  Does the device show dhcp is being used.. See I have it OFF on mine and IP is setup static..  

 

Do a ipconfig /release and then renew on the machine so your sure its pulling the lease from the router..

Expand  

Thanks for the help so far @BudMan, when I get a chance (most likely this weekend) I will look into the issue more. Question: when assigning the system a static IP, is it better to let the router do it, or do it via Windows? Right now I am thinking that the issue might be like you said and I know that the .4 address is set via the network control panel in windows, should I set it to automatic and let the router handle assigning the IP address?

  On 24/01/2019 at 23:51, jnelsoninjax said:

Thanks for the help so far @BudMan, when I get a chance (most likely this weekend) I will look into the issue more. Question: when assigning the system a static IP, is it better to let the router do it, or do it via Windows? Right now I am thinking that the issue might be like you said and I know that the .4 address is set via the network control panel in windows, should I set it to automatic and let the router handle assigning the IP address?

Expand  

Remove the entry from the Windows control panel and use DHCP reservation's on your router.

  On 24/01/2019 at 23:57, Circaflex said:

Remove the entry from the Windows control panel and use DHCP reservation's on your router.

Expand  

OK, that's what I will do, I am not sure why it is set in windows and the router, it was most likely an oversight on my part when I was troubleshooting.

Well if how the system finds your machine is via it grabbing a dhcp lease.. The setting it on the machine is not going to be good for you ;)

 

I normally run dhcp but you see above its static set because haven't gotten around to setting up new reservations as of yet, when I changed out nics and put in 2 so I could do smb3 multichannel.  I only showed the 1 there is another one with .101, but I don't have a gateway set on that interface because I don' want it used for outbound.  Only for talking smb3 multichannel to the NAS which is on the same vlan as my pc.

Hello,

 

This may be a silly question, but I don't think I saw it mentioned, so apologies in advance if this is a duplicate.

 

Have you contacted Linksys' technical support to see if there are any known issues with detecting PCs?  There might be something about the what it fingerprints the computer based on its networking stack or the NIC itself which prevents it from detecting it.

 

Another option might be to look at third-party firmware, as @Circaflex mentioned, or even install parental control software on the PC (which might be a non-starter is the user has administrative access).

 

Regards,

 

Aryeh Goretsky

 

  On 25/01/2019 at 19:38, goretsky said:

Hello,

 

This may be a silly question, but I don't think I saw it mentioned, so apologies in advance if this is a duplicate.

 

Have you contacted Linksys' technical support to see if there are any known issues with detecting PCs?  There might be something about the what it fingerprints the computer based on its networking stack or the NIC itself which prevents it from detecting it.

 

Another option might be to look at third-party firmware, as @Circaflex mentioned, or even install parental control software on the PC (which might be a non-starter is the user has administrative access).

 

Regards,

 

Aryeh Goretsky

Expand  

No, I have not contacted Linksys over this issue, I thought I would try my luck here, first. Regarding 3rd party firmware, I haven't looked into it, but I know that was one of the selling points on this router, and parental control software would not work because she has admin access, her dad st this up for her.

Some of the Linksys routers actually come with OpenWRT on them now, I know the WRT32X does (to my surprise, was wonder what the hell device on my network was running OpenWRT as I didn't install it lol...)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Let's see how long this lasts. In the end, it comes down to productivity lost because of workflow disruptions. It's not even a question of "which is better", rather how painful will it be to switch and it's hard enough for a single person to switch - imagine an entire city's bureaucracy. Remember, there are governmental system in the US that are still using 5.25" floppy disks... Having been involved in these kinds of swaps, I can tell you - it's never as easy as the fanbase thinks it is.
    • Right, saw it in the microsoft blog, wasn't mentioned in the article, thanks.
    • Multiple internal and external HDDs from Seagate, Western Digital are now at great prices by Fiza Ali Amazon and Newegg are currently offering substantial discounts on a wide selection of internal and external hard drives from Seagate and Western Digital, with prices reduced across multiple capacities. The 4TB WD Purple Surveillance is a 3.5-inch SATA III drive offering sustained transfer rates of up to 175MB/s. It employs Conventional Magnetic Recording (CMR) with a 256MB cache buffer. The drive operates reliably between 0°C and 65°C and can be stored in temperatures ranging from –40°C to 70°C. Western Digital backs this unit with a three-year limited warranty as well. 4TB WD Purple Surveillance Internal HDD: $84.41 (Amazon US) - 8% off The 6TB WD Blue is also a 3.5-inch internal hard drive that connects via SATA III (6Gb/s) and delivers sustained transfer rates of up to 185MB/s. It spins at 5,400 RPM, employs Conventional Magnetic Recording (CMR) technology, and features a 256MB cache buffer. The drive operates reliably in temperatures from 0°C to 60°C (with safe storage down to –40°C and up to 70°C). It is backed by a two-year limited manufacturer’s warranty. 6TB WD Blue PC Internal HDD: $99.99 (Amazon US) - 17% off The 10TB WD Red Pro NAS drive comes in a 3.5-inch form factor and connects via SATA III (6Gb/s). It sustains transfer speeds of up to 267MB/s thanks to its 7,200 RPM spindle and 512MB cache buffer, and employs Conventional Magnetic Recording (CMR) for reliable multi-drive operation. It operates safely between 0°C and 65°C, can be stored or transported in temperatures from –40°C to 70°C, and is covered by Western Digital’s five-year limited warranty. 10TB WD Red Pro NAS Internal HDD: $237.49 (Amazon US) - 15% off This WD Elements Desktop external hard drive offers a 14TB of storage via a USB 3.0 interface (up to 5Gb/s), using a USB Micro-B connector that is backward-compatible with USB 2.0. It operates reliably between 5°C and 35°C and can be stored in temperatures ranging from –20°C to 65°C. The drive is powered by an external adapter and carries a two-year limited warranty. 14TB WD Elements Desktop External HDD: $199.99 (Amazon US) - 31% off The 16TB Seagate Expansion Desktop external hard drive delivers vast storage capacity in a simple, plug-and-play design. USB 3.0 connectivity provides high-speed data transfer rates. Out of the box, the Expansion Desktop model is recognised automatically by Windows, macOS, and ChromeOS systems. If you wish to use Apple’s Time Machine backup utility, the drive must be reformatted to the HFS+ file system. 16TB Seagate Expansion Desktop External HDD: $229.99 (Newegg) - 30% off The 16TB WD Elements desktop external HDD connects via a USB 3.0 interface using a Micro-B cable (up to 5Gb/s.) The drive features plug-and-play functionality, working straight out of the box with Windows PCs. It operates reliably in ambient temperatures from 5°C to 35°C and can be stored in temperatures ranging from –20°C to 65°C. The drive comes with a 2-year limited warranty as well. 16TB WD Elements Desktop External HDD: $249.99 + $20 off promo code SAAET2384 = 229.99 (Newegg) The 16TB Seagate BarraCuda 3.5-inch internal HDD offers Multi-Tier Caching Technology (MTC) which balances NAND flash, DRAM, and media cache layers to accelerate application launches, reduce load times, and maintain consistently high sustained read/write speeds. The included Seagate DiscWizard software simplifies drive migration, cloning, partitioning, and backup tasks. The drive is covered by a two-year limited warranty. 16TB Seagate BarraCuda Internal HDD: $194.99 (Newegg) - 7% off The 20TB Seagate Exos X20 delivers an enterprise-class solution for high-density storage environments and data centres. It offers a sustained sequential transfer rate of up to 285MB/s and advanced caching to ensure low-latency, repeatable response times for data-intensive workloads. It further features 550TB/year workload rating, 2.5 million-hour mean time between failures (MTBF), and five-year limited warranty. PowerChoice and PowerBalance technologies allow administrators to tailor power consumption profiles for active and idle states, reducing energy costs and cooling requirements. Hardware-based AES-256 encryption, password protection, and Seagate Secure certification safeguard sensitive data. 20TB Seagate Exos X20 Internal HDD: $379 + $50 off promo code EPET2523 = $329.99 (Newegg) This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • It's all 1Password's fault for using it before anyone else. 🙃
    • Of course you would say that James. Mr everything Microsoft does is perfect. Mr who posts " I love it " on most articles regarding Microsoft. At least Firefox isn't a bloated pig that has an embarrassingly low market share given it's the default. Mr Microsoft evangelical James needs to learn some self awareness. It's embarrassing for you to criticize any browser give your worship of Edge.
  • Recent Achievements

    • Collaborator
      Mighty Pen went up a rank
      Collaborator
    • Week One Done
      emptyother earned a badge
      Week One Done
    • Week One Done
      DarkWun earned a badge
      Week One Done
    • Very Popular
      valkyr09 earned a badge
      Very Popular
    • Week One Done
      suprememobiles earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      562
    2. 2
      +FloatingFatMan
      178
    3. 3
      ATLien_0
      175
    4. 4
      Xenon
      116
    5. 5
      Som
      109
  • Tell a friend

    Love Neowin? Tell a friend!