Recommended Posts

Since the Docker subject has come up and of course in 2019 the word Serer and Docker go together, but also Kubernetes.

 

I just came across an interesting document from the HP Enterprise group that lays out a standard demo server configuration with both hardware and software that is very interesting reading:

 

https://hewlettpackard.github.io/Docker-Synergy/introduction-syn.html

 

I'm just starting to plow through it to see how it compares with the other stuff out there, but the integration of hardware specs is not common and makes it perhaps a nice doc to show "management" if you are stuck in a retro pre-kubernetes organization.

 

I really hate Ansible because it is not "Kube Native" but I understand where they are coming from there... still reading it

 

The usefulness of that document in this thread is perhaps seeing how someboby could take their hardware config and map onto a set of dedicated cores in a single home server machine...

 

7 minutes ago, Brandon H said:

good to know. I just have a basic fan in my PC currently as I'm a bit restricted with a low-profile case. Will definitely think about going Noctua for my eventual upgrade though :)

I have tried many different brands of fans and now I will always buy Noctua - even though they cost a little more.

5 minutes ago, Brandon H said:

good to know. I just have a basic fan in my PC currently as I'm a bit restricted with a low-profile case. Will definitely think about going Noctua for my eventual upgrade though :)

There is no measurement for it (AFAIK) but the water just has a different "feel" that you instantly realize is so much better than air. I use the word "clamp" to describe how the water just hits a certain temperature and then does not let go. Like a Pit Bull for cooling!

 

The sound of fans ramping up with CPU load becomes a distant memory... I think I would be nervous to try going back to that but if you do try the Noctua, I'd be very interested to find out that goes...

 

21 hours ago, DevTech said:

1. I would suggest a lot more CPU cores somehow or the option to get move via an empty CPU socket. For servers more cores are far more useful than more Ghz

 

2. Speed and latency of RAM is simply not critical so it might be possible to investigate cheaper RAM to free up budget for cores etc.

 

3. I would strongly suggest a better PSU that contains either SuperFlower or Seasonic internals.

 

1. I am moving from a dual core to 6 core, for my needs it will be fine

2. This was a deal on the ram was 32Gb for £139 which was the cheapest i could get on a brand i trust :)

3. Is Corsair not a good Make? is the seasonic worth an extra £40?

4 hours ago, Haggis said:

3. Is Corsair not a good Make? is the seasonic worth an extra £40?

3. Corsair is not a "make" - they use other people's stuff as listed out in detail in the link I provided which matches every Corsair model line to the brand of PSU  being used. Most Corsairs are using Chanel Well Technology (CWT) but the AX series uses Seasonic, a step up.

 

http://www.orionpsudb.com/corsair

 

EVGA which is also easily available as Corsair, gives you more flexibilty to look at their model lines and end up with either a Seasonic or a SuperFlower

 

http://www.orionpsudb.com/evga

 

Seasonic is also available as a stand-alone "brand" but usually it is less expensive to get a Seasonic branded as a Corsair or an EVGA. All Seasonic Branded Power supplies use Seasonic PSUs inside...

 

http://www.orionpsudb.com/seasonic

 

Super Flower is available as a stand-alone brand in Europe and Asia but NOT North America. Along with Seasonic, they make the world's best power supplies outside of some specialty companies for server power supplies such as Zippy which might be a "super top tier" by itself.

 

Between examining sales on Seasonic and Corsair-Seasonic and EVGA-Seasonic and EVGA-SuperFlower it is usually possible to get a better power supply for the same money or little extra money.

  • Like 2

Hello,

Just to add to the power supply unit conversation.  I have had good luck with PSUs from [url=https://www.pcpowerandcooling.com/]PC Power & Cooling[/url].   I had a seven-year-old power supply from them fail, and it was replaced speedily and with no hassle from their RMA department under warranty.  The replacement unit is working great.

 

Regards,

Aryeh Goretsky

 

 

5 hours ago, goretsky said:

Hello,

Just to add to the power supply unit conversation.  I have had good luck with PSUs from [url=https://www.pcpowerandcooling.com/]PC Power & Cooling[/url].   I had a seven-year-old power supply from them fail, and it was replaced speedily and with no hassle from their RMA department under warranty.  The replacement unit is working great.

 

Regards,

Aryeh Goretsky

 

 

Back in the day, any top end PC "rig" absolutely HAD to have a PC Power & Cooling PSU to have any cred. They really were #1

 

They fell upon hard times partially because they refused to outsouce to what they considered sub-standard manufacturing in China and they were purchased by somebody...

 

Worth checking into their current story. Last I heard they still design and build in the U.S.

 

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • One of the strangest galaxies in our Universe could help answer some long overdue questions by Sayan Sen Image by Pixabay via Pexels | Not representative An international team of astronomers led by the Department of Astronomy at Tsinghua University has discovered an unusually metal-poor galaxy that may contain signs of first-generation star formation. The galaxy, named Metal-Pristine Galaxy COSMOS Redshift 3 (MPG-CR3), or CR3, was identified using observations from the James Webb Space Telescope (JWST), the Very Large Telescope (VLT), and the Subaru Telescope. The findings, published in The Astrophysical Journal Letters, describe CR3 as the most metal-poor galaxy known from the period known as "cosmic noon," around 11.5 billion years ago. Cosmic noon refers to a period when the universe was producing stars at its highest rate and galaxies were growing rapidly. In astronomy, "metals" refers to all elements heavier than helium, including oxygen, carbon, and iron. Because CR3 contains so few of these heavier elements, researchers say it closely resembles what scientists expect the earliest galaxies in the universe may have looked like. The discovery is significant because it could offer clues about Population III (Pop III) stars, the first generation of stars thought to have formed after the Big Bang. These stars are believed to have formed from gas made almost entirely of hydrogen and helium, before heavier elements were created inside stars and spread across the universe through supernova explosions. Hence this is why CR3 has been referred to as a "living fossil." Scientists have long believed that Population III stars existed only in the very early universe. As more generations of stars formed and died, they enriched surrounding gas with heavier elements, making the conditions needed for metal-free star formation increasingly rare. Because of this, researchers expected the formation of such stars to have largely ended after the epoch of reionization, a period when radiation from the first stars and galaxies transformed the neutral hydrogen filling the universe and made it largely transparent to ultraviolet light. CR3 appears to challenge that idea. The galaxy was observed at a redshift of z = 3.193 ± 0.016. Redshift measures how much light from a distant object has been stretched as the universe expands and helps astronomers determine how far back in time they are looking. In this case, the redshift corresponds to roughly 11.5 billion years ago during cosmic noon. Although the universe was already several billion years old by that point, CR3 shows characteristics more commonly associated with much earlier galaxies. Observations revealed exceptionally strong emissions from hydrogen and helium, including Lyα, Hα, and He I λ10830. Lyα, or Lyman-alpha emission, is a specific wavelength of light produced by hydrogen and is widely used to study distant galaxies. Hα emission is another hydrogen signature commonly used to trace active star formation, while He I λ10830 is produced by helium and can indicate the presence of very hot, young stars. The measured equivalent widths of EW₀(Lyα) = 822 ± 101 Å and EW₀(Hα) = 2814 ± 327 Å are among the highest ever observed in star-forming galaxies. Equivalent width is a measure of the strength of an emission line relative to the surrounding light, and such large values are typically associated with intense and very recent star formation. At the same time, researchers found no statistically significant detections of metal emission lines, including [O III] λλ4959, 5007 and C IV λλ1548, 1550. Emission lines act as chemical fingerprints that reveal which elements are present in a galaxy. Oxygen and carbon lines are commonly seen in galaxies that have already undergone significant chemical enrichment. Their absence in CR3 suggests an unusually pristine environment. Using abundance calibration methods developed with JWST observations, the team placed a 2σ upper limit on the galaxy's gas-phase metallicity of 12+log(O/H)<6.52, corresponding to less than 0.7% of the Sun's metallicity (Z < 7 × 10⁻³ Z⊙). Gas-phase metallicity measures the abundance of heavy elements in a galaxy's gas. A 2σ upper limit indicates that the true value is very unlikely to be higher than the quoted threshold. Even when accounting for uncertainties in the calibration methods, the most conservative limit remains 12+log(O/H)<6.95, making CR3 the most metal-poor galaxy identified at cosmic noon. The galaxy also appears to contain very little dust. Researchers measured a Lyα/Hα flux ratio of 13.9 ± 2.5, a result that suggests negligible dust attenuation, meaning very little of the galaxy's light is being absorbed or scattered by cosmic dust. Because dust is usually produced by earlier generations of stars, this finding further supports the idea that CR3 has experienced very little chemical enrichment. Further analysis using spectral energy distribution modelling, a technique that compares observed light with theoretical models, suggests that CR3 contains an extremely young stellar population only around 2 million years old. The modelling, which used Population III stellar templates, also indicates the galaxy has a stellar mass of approximately 6.1 × 10⁵ M⊙. The symbol M⊙ represents one solar mass, or the mass of the Sun. One of the key questions raised by the discovery is how such a chemically primitive galaxy could exist in a universe that had already spent billions of years producing heavier elements. To investigate this, the researchers examined CR3's surroundings. Their analysis suggests the galaxy may lie in a slightly underdense environment, with a density contrast of roughly δ ≈ −0.12. An underdense region contains less matter and fewer galaxies than average. The team suggests that this relative isolation may have helped preserve pockets of pristine gas. Metal-rich material expelled from nearby galaxies may never have reached CR3, while the lower rate of galaxy mergers and interactions could have slowed the mixing of enriched gas into the system. If future observations confirm these findings, CR3 could provide some of the strongest evidence yet that first-generation star formation continued well after the epoch of reionization. Such a result would challenge the conventional view that pristine star formation ended by z ≳ 6 and suggest that small pockets of metal-free gas survived much longer than previously thought. Researchers stress that more observations will be needed to determine the galaxy's true nature. Future spectroscopic studies with higher resolution and better signal quality could help confirm whether CR3 is genuinely hosting Population III star formation. The discovery is also expected to encourage searches for other similar galaxies, which could help astronomers better understand how the first stars formed and how galaxies evolved in the early universe. Source: Tsinghua University, IOPscience This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • "I think in the immediate absence of a partner to apply relief" In the words of Sterling Archer... "Phrasing!"
    • For me, the fundamental problems with these "smartglasses" is that they really don't work well for people with significant prescriptions and massively up the price if you use attached lenses if they have displays, and if they don't, then they're not actually "smart" anything, rather just connecting to your phone and relaying voice to an AI. In a few cases like this, they throw in small cameras to feed video to the AI. All around, these feel like both a solution looking for a problem, and the problems it tries to solve seem more easily solved by different approaches and designs. Oddly, if the rumours are true, Apple may actually have invented something for once and it kind of does this right: put cameras in ear buds and manage the interface to AI exactly as most of us do: tapping on an ear bud and saying "Hey Google" or "Hey Siri." That makes them compatible with almost everyone, can double up as a hearing assist device, an impaired vision assist device, a "smart" device... and answer your phone and play music. That just seems like a better solution all around.
    • Usually the bigger ones with many fixes/changes take a few, theyre an exception to the rule most likely
    • If you don’t get lucky with Valve’s Steam Machine reservation system, you can make your own Steam Machine instead. Valve says that “starting with the SteamOS 3.8 release, you can put together your own Steam Machine using whatever PC parts you want.” SteamOS 3.8.10 launched last week with a slew of updates, including “improved compatibility with recent Intel and AMD platforms.” Alongside that improved compatibility, Valve is giving gamers the green light to install SteamOS on their own desktops. In an interview with The Verge, Valve’s Pierre-Loup Griffais said Valve has been “rolling out improvements to [SteamOS] so it’s more compatible with desktop hardware,” including eventual support for Nvidia graphics. Griffais says Valve has “a growing team” working on Nvidia driver support for SteamOS, adding, “We’re collaborating with Nvidia very closely.” While he mentioned that Nvidia support might not come this year, Griffais emphasized that “it’s certainly something that we’re working on in the background.”     Subscription not needed: https://archive.fo/Tssfc Subscription needed: https://www.theverge.com/games/953411/valve-steamos-desktop-nvidia
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      84
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!