Recommended Posts

I have a ASUS WL-520gU router (running FreshTomato 2019.2 firmware) and I suspect it's semi-dead because earlier the internet was flaky and what I further noticed is not being able to access the built-in web page at the usual 192.168.1.1 address. so I pulled the power cord from the router, wait a few seconds, powered it back up and at this point I could then access the 192.168.1.1 page but it was not long before it got out of whack again. so I tried erasing the NVRAM option in the FreshTomato 2019.2 firmware, which wipes the router and puts it back to it's defaults, and after the reset, the same thing occurred.

 

so I figured just to test some things... I got my older Linksys WRT54GS v1.1, which I also have FreshTomato 2019.2 firmware on it, and connected that and configured it to my liking and I no longer have that issue and things seem stable now.

 

so given that info... that seems to suggest that ASUS WL-520gU router is pretty much shot, correct? ; but assuming it is semi-shot... could it possibly be a bad power supply etc? ; because I heard capacitors can go bad (either in the router itself or the power supply for the router) and make things unstable. I am just seeing if I can possibly get the router working again. but if I got to put much $ into it, I probably won't bother given the old Linksys works and it's got more RAM to (although I do miss the USB port on the ASUS router since it used it occasionally to power a 120mm USB fan since I got a external hard drive sitting on the desktop which helps cool it if I leave it on any length of time etc).

 

p.s. I am probably going to see what I can do now that the ASUS router has been powered down for some hours as I might try connecting it to another computer I have and try wiping the NVRAM again and after a reboot let the router run for a while to see if the 192.168.1.1 page is still accessible or not.

Link to comment
https://www.neowin.net/forum/topic/1385066-router-gone-bad/
Share on other sites

31 minutes ago, ThaCrip said:

the same thing occurred.

Same what?  flaky is not a term that describes what is actually happening to your internet connection..  Unless your describing baked goods?  Those biscuits sure were flaky ;)

@BudMan

 

Same thing occurred in that the issue never went away as the internet was flaky* and more importantly the 192.168.1.1 address did not work.

 

the ASUS router was working fine until about 12 hours ago.

 

*flaky as in Google would load(at least sometimes), but a lot of other sites would not etc. basically the internet was unstable and I know my internet was not out at the time either. plus, like I already mentioned the 192.168.1.1 issue went away when I switched to the Linksys router and the internet was stable again. that's why I am leaning towards the ASUS router is semi-shot.

5 minutes ago, ThaCrip said:

192.168.1.1 address did not work. 

If you can not get to the web gui, via IP and you sure your on good cable and have IP on the same 192.168.1 network..  Then yeah points to a problem with it.

 

This is wired or wireless your trying to access it?  Did you change to a different port on the routers lan ports?

 

That is  G only router?  Time to have gotten something newer was a long time ago ;)

 

@BudMan

 

I disabled wireless access to the 192.168.1.1 page (more secure that way to). so it's all done through a wired connection and the same wires were used when I changed over to the Linksys from the ASUS. also, I have a static IP setup on my primary PC (i.e. 192.168.1.98)

 

but, like I was saying in my initial post, when I can't access the 192.168.1.1 page, which it should be able to, I can power off the router and power it back on, wait a little and then I can get access to the 192.168.1.1 page for a little while before it goes out again and the unstable internet kicks in along with that issue.

 

but assuming the ASUS router is shot... I just wonder whether you think it's the router itself or a unstable power supply that's making the router unstable as if it's a power supply issue I might be able to find something around the house to fix it etc. but if it's the router itself... that's probably the end of it. but I hear capacitors could be the issue which if that's the case maybe I could fix it but then again if the cost is not very minimal I am probably best off moving on.

 

p.s. basically I have the ASUS (well now Linksys) router connected to my ISP's modem and use the 'IP passthrough' stuff to the ASUS (currently Linksys) router does everything.

Doesn't matter if power supply or gremlins in it.. If its failing - ie can not get to its web gui.. Then get a new one.. That thing is only g and 10/100.. you can pick up a AC wifi router with gig ports for like 20$  To be honest its not even worth dicking with..

  • Like 2
Just now, Jim K said:

Can you load the original ASUS firmware just to see if it works?

Possibly. but I doubt that's the problem because I was using the original Tomato firmware on it for years (i.e. https://www.polarcloud.com/tomato ) then roughly a couple years ago switched to Toastman (which is based on the original Tomato firmware but more updated as the build I was running of that I think was from the year 2014) and that was rock solid (I could easily get over a year of uptime on that) and then not long ago switched to FreshTomato 2019.2 firmware which was released in April 2019 and I installed it (more specifically... "freshtomato-K26_RT-MIPSR1-2019.2-Mini") roughly a month or two ago and it was fine until about 12 hours ago.

 

you still think it's worth attempting the original firmware?

 

p.s. I am sure I could run DD-WRT on it but I tend to prefer Tomato variations a bit more.

1 minute ago, BudMan said:

you can pick up a AC wifi router with gig ports for like 20$  To be honest its not even worth dicking with

 

Good point. but if I do get another more modern router for around $20 I definitely want something that can run Tomato or DD-WRT firmware.

 

because if I can get a noticeably better router for only $20 or so it would be hard to argue against it as if I had to pay like $50-ish or more it's probably not worth it given my internet is not all that fast anyways. but around $20, it would be difficult for me to complain ;)

Sure you could find something that will run dd-wrt that in the <30$ for AC, or for SURE atleast N for that price range..

 

How fast is your internet?  Not always comes down to internet, if you use things that talk to each other over your local network..

 

You understand a G is only like 21-3 mbps tops...  Your internet is that slow?

 

@BudMan

 

My internet is actually quite slow for high speed standards... 400-420KB/s MAX for download speed. so as you can see it's pretty weak. could be worse, but could be better. although what I do like about it, no data cap with my current stuff.

 

that's my general wired computer (my main PC) and I only got a couple of wireless things that use it for basic internet here and there. but I guess it would not hurt having a bit better wireless speed in case I do a transfer over the local network etc and I guess even from a wired perspective it would not hurt to get something that can go beyond the 10-11MB/s limit of my current routers.

Similar to you I've had the Linksys WRT54G, ASUS WL-520GU then an ASUS RT-N16 all running the Tomato Firmware.

 

The issue you described I actually had a few times with the ASUS RT-N16, I re flashed the firmware, erasing the NVRAM in the process and the router would be fine for a few months, then the same would randomly happen again. The router was however fine for years before this occurred. It's almost like the on board flash was gradually corrupting over time.

 

I'm now running pfSense in a Virtual Machine as my router, certainly coming from the Tomato Firmware you'd very much like the pfSense web ui.

 

Something like the SG-1100 might a nice upgrade from a router flashed with third party firmware if you thought it was worth spending the money on it.

@InsaneNutter

 

Thanks. it's nice to know someone experienced the same issue I have and seems to pretty much confirm the router is basically shot (or at least not reliable enough to use for any length of time).

 

on a side note... looking around online it seems you can find some routers noticeably better than what I have for $30 tops. but I suspect ill just wait a while until my Linksys WRT54GS v1.1 dies as I even have another older Belkin router (it's not as good as the Linksys but I suspect will get me by) I can use if this one acts up in the future but that one can only run DD-WRT micro since it's only got 2MB flash and 8MB of RAM where as the Linksys I am using has 8MB flash and 32MB of RAM which is a lot for the older wireless G routers.

 

but thanks for the link to SD-1100 but for around $159 is a little to steep as I am looking more in the $30 range. but like I mentioned above, ill probably use the Linksys I mentioned above for as long as I can before it dies as by then ill be able to get a even better router for around $30 or so.

 

p.s. thanks for everyones help as it appears we pretty much sorted it out.

You are correct added some extra 000 in there ;) 

 

That is some slow ass internet.. You would be better off just using your phone for internet, hehehe

 

Who would even provide such slow internet - slowest internet package from say infinity is 25mbps..  for $20 a month.. What do you pay for such a connection, that is like low end of a 3G wireless connection.

3 hours ago, BudMan said:

that is like low end of a 3G wireless connection.

In India, the average 4G speed is about that much! 🤣😑

 

The fastest speed you can get is only around 10 times that. 😖

@ThaCrip Yeah, your router is most likely at the end of its life. Just get a new AC router. Or if you have an old PC lying around, stick another NIC in it and run pfSense. Even a 10 year old PC with pfSense will sweep the floor with most consumer routers. The power consumption of an old PC is going to be a lot higher than a tiny basic router though. And you will need Access Points or an old router configured as an AP for wireless. But if you're willing to overlook those points, pfSense is way more feature rich and powerful compared to any 3rd party firmware!

Pfsense is NOT something you would use for any wifi to your network ;)  Sticking a card in the pc wouldn't be a good idea, nor does freebsd even have any ac support.

 

But if his internet is really that slow, then such a cheap router is all he would need for internet.. But doesn't he move stuff around internally?  10/100 would be almost as bad as G wireless.. I don't have any G devices on my network even..   Even the cheapest IOT device these days do N, they might not do N on 5.. But they don't do G ;)

 

But sure if he had an old PC around to run pfsense on, and then use the $20 AC router as just an AP..

7 hours ago, BudMan said:

Pfsense is NOT something you would use for any wifi to your network ;)  Sticking a card in the pc wouldn't be a good idea, nor does freebsd even have any ac support.

But sure if he had an old PC around to run pfsense on, and then use the $20 AC router as just an AP..

Yes, that is what I actually meant, just didn't explain it better. The 2nd NIC would be for ethernet which would connect to a switch. And then all AP's or old routers as AP's to that switch. 🙂

Hello,

 

Given the age of the device (about eight year old or so), I would assume that one of the hotter-running components on the board has gone bad (the PHY, processor, power circuitty or wireless radio).  Most, if not all of these, are going to be surface-mounted or perhaps even BGA-mounted components and not replaceable without a rework station for reflowing the solder.  Given the length of time the device was in service, I would just recommend looking for a replacement device, as @BudMan suggested.

 

Regards,

 

Aryeh Goretsky

 

@goretsky

 

Yeah, I figured the ASUS router is pretty much shot.

 

but last night I basically plugged it back in, cleared NVRAM, rebooted and just sitting there with a basic cat5 cable connected to a laptop, so it's offline, it seemed to be okay in the brief time I tested it, which was about 5-10min, and the 192.168.1.1 page was still accessible. so it appears it's working, but given what happened it's hard to say if it still stay working for long especially given the comments above by InsaneNutter. because if it's only going to be okay for maybe a few months before acting up again I am better off not using it. so ill probably stick with the Linksys WRT54GS v1.1 (8MB flash/32MB RAM) for now.

 

thanks again for everyones time ;)

Not sure how anyone could possible find G ok... Do you not do anything on your local network, no streaming of movies or anything.. I take it your internet is slow and G is capable of handling it.. But wow how can you actually do anything with such connection... The files I move over to my nas in 30 seconds would take hours..

 

Are you out in the middle of the boonies or something that your internet is so slow?  What does its cost - is it like $5 a month or something?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hands-on with BOOX Tappy: cute little reading accessory by Taras Buria Page turners are quite popular accessories for e-readers, as they enable a hands-free reading experience, which is particularly useful with large readers featuring 10-inch or larger displays. The BOOX Tappy is a new accessory that was introduced earlier this year, and we took this cute-looking thingy for a spin. The Tappy comes in a small box, with two additional buttons and a user manual. The device is made of glossy green plastic and resembles old appliances from the nuclear age. Material quality is great, and each part feels quite premium. Plastic is high-quality, the switch is nice to flick, and the buttons are not rattly. At the bottom, four rubberized feet prevent slipping when used on a desk. Unfortunately, there are no color options, and the Tappy is only available in green. It looks good, but I wish there were other options as well. There are two removable buttons, an on/off switch, and an LED indicator that displays connection mode, charging status, and more. The buttons resemble those of an old typewriter, with quite a long travel distance and a pleasant clack. In the box, you have four buttons with different icons: heart, coffee, O, and X. You can easily swap buttons by simply pulling them upwards. Tip: buttons come with plastic covers, but they are quite tricky to remove. It is hard to call the Tappy the most ergonomic remote control, but after fiddling with it for a few hours, I managed to find a comfortable hand position. Attaching a lanyard to it can make it more comfortable in use without the fear of dropping it, but unfortunately, the Tappy does not come with one. The Tappy connects via Bluetooth 5.2, and it works in three modes, which you can toggle by pressing and holding both buttons for about five seconds: Reading Mode Multimedia Mode Browsing Mode Next / Previous page Next / Previous Track Up / Down scroll If you pair the Tappy with a BOOX device (I tested it with the BOOX Go 10.5 Gen 2 Lumi), you will get small pop-ups indicating the current mode. Plus, you can customize what each button does when pressed one time, two times, or held for a few seconds. The list of available actions and features you can use is massive, and I like that BOOX lets you map stuff like brightness adjustment, app launching, screenshot-taking, screen rotating, navigation, and more. Note, however, that while you can use the Tappy with other readers, its customization is only available on BOOX devices running firmware version 4.2 and newer. I could not connect the Tappy to my computer (Windows 11 claims a driver error when I try), but it worked with the DuRoBo Krono that I recently reviewed. My Kindle Paperwhite refused to work with the Tappy, though, just like my iPhone. The Tappy uses a non-removable Li-Ion battery, which can be recharged with a Type-C cable. BOOX rates the remote for "weeks of use," and I can say that it indeed has very good battery life. While there are no battery indicators on the remote, you can see the current level in the status bar or in Input settings in the BOOX firmware. After a few days of active use, mine still shows about 95%. Overall, the Tappy left a nice impression. It is well-made, and the integration with BOOX devices is great. I also like that BOOX decided to have some fun with its design and swappable buttons. I cannot say I am a fan of its odd shape, though. Still, I managed to find a way to use it comfortably. And when not in use, it just looks neat sitting on the table doing nothing or serving you as a small clacky fidget. Buy BOOX Tappy - $29.99 on Amazon US As an Amazon Associate, we earn from qualifying purchases.
    • AdGuard Family lifetime deal now only $14.97 by Steven Parker Today's highlighted Neowin Deal comes via our Apps + Software section, where you can get a lifetime subscription and save 91% on a lifetime AdGuard Family Plan. AdGuard is a unique program that has all the necessary features for what they claim to be "the best web experience." The software combines the an advanced ad blocker, a privacy protection module, and a parental control tool—all working in one app. This software deals with annoying ads, hides your data from a multitude of trackers, protects you from malware attacks, and even lets you restrict your kids from accessing inappropriate content. Install AdGuard and see the internet as it was supposed to be: clean and safe. Get rid of annoying banners, pop-ups & video ads once and for all Hide your data from the multitude of trackers & activity analyzers that swarm the web Avoid fraudulent and phishing website and malware attacks Protect your kids online by restricting them from accessing inappropriate & adult content Good to know Family Plan Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Max number of devices: 9 Access options: desktop & mobile Software version: AdGuard Family Updates included A lifetime subscription of AdGuard Family Plan normally costs $169.99, but this deal can be yours for just $14.97, that's a saving of $157.02. For full terms, specifications, and license info please click the link below. Get this AdGuard Family lifetime deal for just $14.97 (was $169.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. As an online publication, Neowin too relies on ads for operating costs and, if you use an ad blocker, we'd appreciate being whitelisted. In addition, we have an ad-free subscription for $28 a year, which is another way to show support! Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • Passkeys: Think of them like a broken heart necklace. Imagine one of those heart necklaces that breaks into two matching pieces. One person keeps one half, and the other person keeps the other half. With passkeys, the website has one half, and you have the other half. If the website gets hacked and someone steals its half, that stolen piece is useless by itself. It cannot unlock your account without your matching half. This particular heart necklace is one of a kind, there is only one in existence. Your half of the necklace has to be stored somewhere. It might be stored on your phone, tablet, computer, security key, or a password manager that can sync it between all your devices. A security key is a small physical device that you keep with you, kind of like a house key, car key, or flash drive. I would not usually recommend a security key as the first option for the average person. For most people, it is easier to use their phone, computer, or a password manager that can sync passkeys between their devices. A security key is more like a spare key you keep in a safe place, just in case you lose access to your other devices or your password manager. Some security keys plug into your computer. Some plug into your phone or tablet. Some get tapped against your device. The idea is simple: a security key can hold another passkey for the same website. Think of it like creating a second one-of-a-kind heart necklace for the same account. One necklace could be paired with your password manager, while another necklace could be paired with your security key. That means the website has more than one matching half on file. One half matches the passkey in your password manager. Another half matches the passkey stored on your security key. So, if you lose access to your phone, computer, or password manager, you would still be able to log in using the passkey stored on your security key. Think of it like keeping an extra special necklace piece on a tiny keychain, stored somewhere safe. The website still has the matching half for that security key, but your half is safely stored inside the little key. A passkey does not automatically exist on every device you own. It lives wherever you save it. If your half is stored on one device, then that device is the one that has the matching piece. For example, if you create the passkey on your Windows computer and it is only saved to that computer, your iPhone does not automatically have that same half. If you create it on your iPhone and it only stays on that iPhone, your Android phone does not automatically have it either. That is where password managers come in. A password manager can act like a protected jewelry box for your passkeys. Instead of your half of the necklace being locked to only one device, the password manager can securely sync that half to your other approved devices. For example, Apple Passwords and iCloud Keychain can sync passkeys between your Apple devices. Google Password Manager can sync passkeys with your Google account. But password managers such as 1Password and Bitwarden can sync passkeys between everything, your phones, tablets and computers. Now, you might ask: “What happens if I lose access to the device that has my passkey?” That depends on where your passkey was saved and what recovery options the website gives you. If your passkey was synced through a password manager, you may be able to sign in from another device that has access to that same password manager. For example, if your passkey is saved in iCloud Keychain, Google Password Manager, 1Password, or Bitwarden, another approved device may still have access to it. If your passkey was saved only on one phone, computer, or security key, and you lose that device, then you may not have your half of the necklace anymore. In that case, you would usually need to use the website’s backup login or account recovery options. A lot of websites that support passkeys still let you fall back to your regular password. So if you lose access to your passkey, the site may still let you log in with your password, a code sent to your email, a text message, a recovery code, or some other account recovery process. That is convenient, but it is also important to understand: if the website still allows password login, then your password still matters. Passkeys are safer than passwords, but if your account still has a password as a backup, you should still use a strong, unique password and turn on two-factor authentication if the website offers it. This is why it is a good idea to have more than one safe way back into important accounts. For example, you might keep your passkey in a syncing password manager, add a second trusted device, save recovery codes somewhere safe, or set up a backup security key. A passkey is very secure, but just like a real key, you need a backup plan in case you lose access to it. Now, you might ask: “What stops a hacker from copying my half of the necklace?” That’s the important part: your half is protected. It is not something you type in, and it is not something the website gets to keep. Think of your half as being locked inside a tiny safe on your phone, computer, security key, or password manager. That safe only opens when you approve it with your fingerprint, face, PIN, or device password. When you log in, the website does not need to see your half. It only needs proof that your half matches its half. Your actual half is not handed over to the website. This is different from a password. With a password, you type the secret into the website. If you type it into a fake website, the hacker now has it. With a passkey, you are not typing your secret into the website. Your device is proving you have the matching half without giving the half away. That also helps protect you from fake websites. If someone makes a fake login page that looks like the real site, your device can tell it is not the real match. It will not use your passkey there. Now, could someone use your passkey if they stole your device, got into your password manager, or somehow unlocked the safe that holds your half? Yes, that is why your device password, PIN, fingerprint, face unlock, and password manager security still matter. But a hacker cannot just steal your passkey from the website or trick you into typing it into a fake page like they can with a password. That is why passkeys are safer than passwords. The two matching pieces have to come together, like two lovebirds who were once separated and are finally reunited.
    • Newegg offers insane combo deal on Amazon Prime Day 2026 that beats Steam Machine by Sayan Sen Building a PC is undoubtedly difficult nowadays but with this epic combo deal, Newegg is trying to make it as easy for you as it is possible. If you are making a new one or even upgrading an old system to a new Windows 11 device, this combo bundle is truly unmissable as you get AMD's Ryzen 9800X3D, a compatible X870 motherboard, a 240mm AIO liquid cooler and finally a Samsung 990 PRO SSD all for under $1000 (purchase link under the specs table down below). This should beat out the newly launched Steam Machine from Valve in terms of performance and performance per dollar especially if you are willing to set Linux up on it. Essentially with this combo you will get the AMD Ryzen 7 9800X3D 8-core 3D V cache CPU, Samsung's 990 PRO 2TB NVMe SSD, the MSI MAG X870 TOMAHAWK WIFI ATX Motherboard, and finally the Cooler Master Elite Liquid 240. Thanks to that massive vertically stacked L3 cache, the X3D desktop processors, including the 9800X3D, also come with the benefit of not needing fast memory. Even DDR5-5600 should be plenty for it. The technical specifications of the Ryzen 7 9800X3D are given in the table below: Specification Value Architecture Zen 5 Cores / Threads 8 / 16 Base Clock 4.7 GHz Max Boost Clock Up to 5.2 GHz L1 Cache 640 KB L2 Cache 8 MB L3 Cache 96 MB Total Cache 104 MB CPU Core Process TSMC 4nm FinFET I/O Die Process TSMC 6nm FinFET Socket AM5 Default TDP 120W Max Temperature (Tjmax) 95°C Thermal Solution Not included Memory Type DDR5 Max Capacity 256 GB Memory Speeds 2x1R: DDR5-5600 2x2R: DDR5-5600 4x1R: DDR5-3600 4x2R: DDR5-3600 PCIe Version PCIe 5.0 PCIe Lanes (Total/Usable) 28 / 24 USB 3.2 Gen 2 (10Gbps) 4 USB 2.0 1 Graphics Cores 2 CU RDNA 2 Frequency 2200 MHz DisplayPort over USB-C Yes Overclocking Unlocked Up next we have the tech specs for the MSI MAG X870 TOMAHAWK WIFI Motherboard: Specification Value Chipset AMD X870 CPU Support AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors Socket AM5 Memory Slots 4 × DDR5 UDIMM Maximum Memory Capacity 256GB Memory Support DDR5 8400–5600 MT/s (OC), DDR5 5600–4800 MT/s (JEDEC) Integrated Graphics Outputs 1 × HDMI 2.1 FRL (up to 8K 60Hz) 2 × USB4 Type-C with DisplayPort 1.4 HBR3 (up to 4K 60Hz) Expansion Slots PCI_E1: PCIe 5.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (Chipset) PCI_E3: PCIe 4.0 x4 (Chipset) Audio Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-bit/384kHz playback on front panel S/PDIF output M.2 Slots 4 × M.2 M2_1: PCIe 5.0 x4 (CPU, 22110/2280) M2_2: PCIe 5.0 x4 (CPU, 2280/2260) M2_3: PCIe 4.0 x2 (Chipset, 2280/2260) M2_4: PCIe 4.0 x4 (Chipset, 2280/2260) SATA Ports 4 × SATA 6Gb/s RAID Support RAID 0, 1, 5, 10 for M.2 NVMe storage devices Rear USB Ports 4 × USB 2.0 3 × USB 5Gbps Type-A 2 × USB 10Gbps Type-A 1 × USB 10Gbps Type-C 2 × USB4 40Gbps Type-C Front USB Headers 4 × USB 2.0 4 × USB 5Gbps Type-A 1 × USB 20Gbps Type-C LAN Realtek 8126-CG 5G LAN Wireless Wi-Fi 7 (M.2 Key-E module pre-installed) Supports 2.4GHz / 5GHz / 6GHz bands Up to 5.8Gbps Supports 802.11 a/b/g/n/ac/ax/be Bluetooth Bluetooth 5.4, MLO, 4KQAM Internal Power Connectors 1 × 24-pin ATX Power 2 × CPU Power Connectors 1 × PCIe 8-pin Power Connector Fan Headers 1 × CPU Fan 1 × Combo Fan (Pump/System) 6 × System Fan RGB Headers 3 × Addressable V2 RGB (JARGB_V2) 1 × RGB LED (JRGB) Other Internal Headers 1 × EZ Conn-header 2 × Front Panel Headers 1 × Chassis Intrusion 1 × Front Audio 1 × TPM 2.0 Header Debug Features 4 × EZ Debug LEDs 1 × EZ Digit Debug LED Rear I/O Ports Clear CMOS Button Flash BIOS Button HDMI 2 × USB 40Gbps Type-C 1 × USB 10Gbps Type-C 4 × USB 10Gbps Type-A 3 × USB 5Gbps Type-A 4 × USB 2.0 5G LAN Port Wi-Fi/Bluetooth Antenna Connectors Audio Connectors Form Factor ATX The Samsung 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification Value Interface PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 Controller Samsung In-house Controller NAND Flash 3D TLC DRAM Cache 2GB LPDDR4 Sequential Read (Max) 7,450 MB/s Sequential Write (Max) 6,900 MB/s Random Read (4K) Up to 1,400,000 IOPS Random Write (4K) Up to 1,550,000 IOPS TBW (Endurance) 1,200 TBW MTBF 1,500,000 hours Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Shock Resistance 1,500G / 0.5ms Heatsink No Get the combo deal at this link: AMD Ryzen 7 9800X3D, Samsung 990 PRO 2TB, MSI MAG X870 TOMAHAWK WIFI motherboard, Cooler Master Elite Liquid 240: $784.99 + $25 off with promo code FTTF77: $759.99 (Sold and Shipped by Newegg US) Good to know This Newegg deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      469
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!