Recommended Posts

1 hour ago, BudMan said:

Not sure how anyone could possible find G ok... Do you not do anything on your local network, no streaming of movies or anything.. I take it your internet is slow and G is cable of handling it.. But wow how can you actually do anything with such connection... The files I move over to my nas in 30 seconds would take hours..

think you meant "capable"... 🤣

@BudMan

 

I am on DSL. I am not a fan of streaming in general even though I don't mind streaming some basic YouTube videos here and there.

 

but yeah, with 420KB/s MAX (but it's more like 400KB/s give or take a little), my older router can easily handle it and I don't really transfer files much over the network as if I did it would be limited to 10-11MB/s tops and would be a problem if I did that a lot and had plenty of data to transfer. I do have a external docking station that I can connect 3.5" and 2.5" hard drives to but that uses a USB v3.0 connection so I have no limit here as the USB 3 connection will max out my hard drives.

 

p.s. but like I was saying... what I do have going for me is unlimited data as I am sure there is faster internet available in the area but I doubt they have unlimited as I would rather have a slower line (but still usable) with unlimited data than have something fast and be capped to say 250GB a month max etc since at 400KB/s I can potentially download as much as about 1TB(1000GB) a month). even for a conservative figure of 380KB/s... would potentially give me a theoretical maximum of right around 985GB a month. because sometimes I don't go over 250GB in a month, but sometimes I do. so basically if I have to choose between 400KB/s(0.4MB/s) and unlimited data or say 1-2MB/s (or faster) but with a 250GB a month limit, I am definitely going with the 400KB/s option.

Data caps would depend on your isp.. I have no such cap and download multiple TB (sometimes in a month).. Xfinity cap is 1TB a month I do believe..   I have 500/50mbps with no cap..

 

How much does this screaming uncapped 400KB connection cost you btw?  Mine is $59 a month..   For what 156x your speed ;)  So I would hope your cost would be in the range of 60/150  so like 40 cents a month? ;)

 

Glad you happy with it - but your phone has to have a faster connection just via cell ;)

@BudMan

 

If that's the case they must have raised it as we had Comcast at one point in the past but they had a 250GB cap the last I knew. but at 1TB a month I can easily work with that as I doubt I even come close to that amount of data in a month as I 'might' reach around half of that or so at the most and those would be my higher months as even if I had a very fast line with unlimited data, there is only so much one can download before it becomes a obsession basically as I think some people download stuff just to collect it, sort of like a download addition as I pretty much stopped doing that years ago and only download stuff ill use etc which 1TB a month is clearly more than enough for me as the last I checked my routers general data info, off the top of my head, I am probably somewhere between 150-300GB (or so) per month most of the time.

 

I think my DSL is roughly $40-45 or so and I suspect your area has faster/cheaper internet than where I am at (although to be honest I have not looked around in years). I am sure Comcast has those introductory offers but I just wonder what their cheap plans are (as in straight up monthly price after the introductory offer is over) as I would be mostly concerned with the cheapest internet possible but without a data cap (or if there is a data cap it needs to be no lower than 500GB a month) and passable/usable level of speed (I would imagine anything around 3-4MB/s is plenty) because after a certain point speed becomes overkill to where it's not worth the extra monthly costs unless people are obsessed with downloading files with very little wait time. but the way I see it, if you can download a large file within a reasonable time frame, it's easily fast enough.

 

also, when you say 500/50mbps I assume that means your download speed is about 62.5MB/s, maybe a little less? ; if so, that's amazing as I don't think I ever had more than around 1-2MB/s off the top of my head. but I guess some people are spoiled nowadays as even anywhere around 2MB/s a sec would be great in my mind and it appears your WELL beyond that as you can get like  a 10GB file in like roughly a few minutes (assuming about 60MB/s) which is great as it takes me about 7-8hours for that same file.

 

your $59 a month is quite reasonable especially for that very high download speed. but personally if I could shave that down to say $30-40 or less a month for even a fraction of the speed you got I would easily do it as I am sure I would be more than happy with even 3MB/s or so as that's pretty much nearly 11GB a hour which basically means just about any large file could be downloaded in about a hour tops and I could easily wait a hour especially considering it takes me in the ball park of 7-8 hours. but anyways, since I first got my DSL, while 400KB/s sounds slow, it's MUCH better than what I originally started with which was 40KB/s.

 

just some thoughts and thanks for the suggestions ;)

 

NOTE: I never understood why people always refer to general internet speed as kbps/mbps instead of KB/s and MB/s as the KB/s and MB/s makes more sense since it's what people generally are more familiar with as when you download a basic file it's almost always going to be in KB/s or MB/s.

 

p.s. I don't have a cell phone. I know that's rare in today's world but I simply won't use them enough to justify the monthly costs.

Yeah I can see 60MBps download - normally is in the mid to high 50's.. All depends on where your getting something from to be honest..

 

Here just grabbed this 2GB file server off vps of mine in NL.

download.thumb.png.dca0a5339578bd737344ba405b9dac97.png

 

There is some fluctuation in that, and depending on time of day its can be slower, etc.. but yeah I do see my full pipe of what paying for..

 

I would look around for sure for better connection.. Shoot even a LTE connection would be way faster, but those sorts of connections normally do have caps.

 

You normally see speeds in mbps vs KB.. Because these are the speeds because bits is the base value and not bytes.. For example would normally refer to your speed as say 3mbps vs 400KB, as the speed increases you move into the next.. So for example you would call it 1gbps vs 1000mbps ;)

 

 

@BudMan

 

Damn, that's amazing ;)

 

hell, it could fluctuate down to anywhere near 5-10MB/s and it would still be more than great. but in your case I suspect it mostly boils down to the source speed (server) of the file more than your line being the limiting factor. when you download from random websites... is your download speed quite a bit slower at times due to the server not being able to max out your line?

I don't download from "random" websites ;) hehehe

 

Other than loading the sites themselves which are not much in total size, so its kind of hard to see how fast its actually going.. But lets just say pretty much any sites pretty much just load instantly.. If a site takes more than a couple of seconds it seems like something is wrong.

 

I guess if you have not seen faster, then you get use to what you have... But once you see how the internet is suppose to be on a decent speed connection.. Yeah going back to something like 3mbps would be like freaking watch paint dry.. And would just be frustrating as hell.. It would drive me insane ;)

 

To be honest the internet at work is painfully slow to be honest..

heheh dude my first modem was 600 baud... I could type faster than the data could be transferred.. the v.22 when v.32 came out wow that was screaming 2400 baud ;)

 

There was no ISA slots even back then.. Those didn't come out to early 80's  At school had the old ones you had to put the phone handset in ;)  Dialing into the mainframe at unlv so we could do a fortran assignments..

haha, I was only born in '85. I do know the older architecture, but never really used it like you.

 

Edit: And I really never got into computers until the 98/2000 days...

1 minute ago, BudMan said:

Then yeah you prob didn't get to play with the old plug your phone  handset into the modem..

Sadly, no... I have seen this in a computer museum once, but never used it.

Our first computer was 1995 (I was born 1979) which is basically 3-5 years before computers were mainstream (so about 1998-2000 which is similar with general cell phones to) as the oldest OS I used was Win v3.11 on a 486dx2 66Mhz CPU. I think that had a 2400baud modem and 4MB of RAM (upgraded to 8MB) and a 4xxMB HDD. so I don't go back to the early days, but I go back before most people were online ;) ; I remember using 14.4/28.8 and 33 something I think and then the standard before they pretty much dumped dial-up... 56k which, is 5-6KB/s at best. so even really slow internet is lightning compared to those days but then again back then things were generally a lot less graphics heavy to keep website load times reasonable.

 

but you could basically say once Windows 95 came along it's overall interface is pretty much the same as today's, or similar enough. but it seems it was at least Windows 98 before computers hit mainstream status. I did use Win2k which was before WinXP, because as far as Microsoft goes, Win2k was the first stable OS that the average person could use although the first stable OS from Microsoft that was targeted at the home user was WinXP as prior to the Win2k/WinXP thing you generally had to reboot your computer fairly often as the OS's generally were not stable enough to go for several days or weeks or more like they have been since pretty much Win2k/WinXP to date.

 

p.s. we had high speed internet available in the area since the year 2000 as according to the person who installed it in my area said I was one of the earlier people to get it. so that will generally give you a rough idea on computers going mainstream etc. I imagine in more bigger cities it could have been a bit before that but I would say that general 1998-2000 time frame is either exactly right or pretty close to it in terms of mainstream status to where many started getting computers/internet.

 

4 hours ago, Mindovermaster said:

And I really never got into computers until the 98/2000 days

 

Yeah, that's pretty much inline with the masses. like the early day's of PC/Internet going mainstream.

 

7 hours ago, BudMan said:

I don't download from "random" websites

 

Well I just mean downloading a decent sized file from a website you can generally see how quick it's downloading unless the file is not large enough for it to take at least a few minutes for you. but I guess with your speed, since it's so fast, unless the file is pretty large, it will probably be done before you can even gauge the speed it's going (probably very shortly after you start it). lol

 

but since I noticed your old school pictures above... that appears to be clearly before my day. but internet in general was pretty much not available to the general public til roughly early 1990's? ; but from a quick search online it appears it was Aug 6th 1991 when internet first became available to the general public. so I guess given that info I was roughly in between the beginning (i.e. 1991) and mainstream status (i.e. about 1998-2000) since I was 1995.

Before the internet was BBSes, use to dial into quite a few of those ;)  Use to send messages around the world with fido, etc. Take a few days.. But was faster than snail mail ;) hehehe

 

here

https://en.wikipedia.org/wiki/Bulletin_board_system

  • Like 2
  • 6 months later...

UPDATE: on Jan 31st 2020 I replaced the two 16v 470uF capacitors (with some used ones I found around the house(although they are 85c rated instead of the stocks 105c)) in the ASUS WL-520gU router and it seems to have cured it's stability/uptime issues as I am nearly 2 days 18 hours in and so far all is good. but ill probably need a full week, maybe two, before I can say for sure. but I am pretty confident replacing the capacitors fixed it since in recent memory the router has gotten worse as I noticed even the wireless was kicking out (like the light was completely off even after attempted hard-reset etc and then came back on out-of-the-blue several minutes later) and typically could not get more than about a day or so of uptime. I stumbled into this stuff over on the DD-WRT forums where someone said he's fixed quite a few routers etc this way.

 

I suspect that's what's acting up on my Linksys WRT54GS v1.1 which has four 25v 220uF caps in it which I suspect ill eventually replaced with some Panasonic ones on Ebay for only around $5 as the ones in it currently are likely generic junk as it shows HERMEI for brand name on them, which apparently are made in Taiwan, where as quality caps typically come from Japan as looking around online there are a fair amount of brands that are supposed to be top tier caps and Panasonic is one them.

 

I even re-flashed to the newest firmware (FreshTomato 2020.1) on the ASUS WL-520gU and cleared the NVRAM and reconfigured from scratch to help ensure no glitches remain.

 

so I just thought I would update this topic as this could be useful for those who have a soldering iron etc as it's a simple $5-ish fix which makes it worth doing as if it was like $20+ it would not be worth attempting.

 

p.s. I heard that can even fix PSU's and computer monitors a good portion of the time to but I never tried it on one yet as my computer monitor is 10 years old this month and still going strong. but if it dies, if I can get some caps for around $10, ill probably gamble and give it a shot.

Edited by ThaCrip
  • Like 2
On 7/24/2019 at 10:49 PM, BudMan said:

Then yeah you prob didn't get to play with the old plug your phone  handset into the modem..

 

Acoustic_coupler_20041015_175456_1.jpg

Wow! That's some old a** stuff! Never even seen or heard of such a contraption, but then I was one of the last people to even get a computer in my circle of people. Thought a computer in the house was as dumb as dirt back then. Wife convinced me to get one and said I would probably like it. Boy, was she sorry she said that! Used to tie up the phone all day and night downloading from Napster and stuff! Don't do nearly as much online as I used to anymore. Have gotten older and realized there's way more to life than setting in front of a monitor.

1 hour ago, ThaCrip said:

p.s. I heard that can even fix PSU's and computer monitors a good portion of the time to but I never tried it on one yet as my computer monitor is 10 years old this month and still going strong. but if it dies, if I can get some caps for around $10, ill probably gamble and give it a shot.

You sure can, Iv`e fixed several tv`s, monitors and other stuff over the years due to bad/blown caps. It`s quite easy to tell normally and as you say for a few quid you`re not losing much if it doesn`t work. Just got to make sure you get the same value capacitor and get the polarity right.

 

Glad you seem to have got it sorted 👍

@Riggers

 

But the caps on both of my routers look perfectly okay (i.e. no swollen caps or leaks (like one would normally expect)) even though it appears they were actually bad as at the moment I got 3 days 6 hours+ and everything still seems okay. because this is the same experience of the person I talked to over on the DD-WRT forums in that the caps appear to be perfectly okay from a visual standpoint even though they are not.

 

I have some caps on my old motherboard that are swollen, with some even appeared to have slightly leaked, but it's still stable the last I checked as I ran a memory test and Prime95 on it back around Jan 2019 and all was good. because there are at least 8-10 caps that are at least slightly swollen with a bit appearing to have slightly leaked. but given how much work it is, and it's just a backup computer, I probably won't bother fixing it for the foreseeable future.

 

p.s. I am aware of the whole negative/positive stuff as I take note of that before removing the old caps and I know you can increase voltage of the capacitor (like say go from stocks 16v to say 25v for example) but cannot decrease it (like if stock is 16v you cannot go lower than that).

  • Like 1

UPDATE: on my ASUS WL-520gU router I just noticed that FreshTomato 2020.1 reset the uptime after about 6 days. I am currently running a recent build of DD-WRT (r41686(Dec 10th 2019)) and I am going to see if that works better as I figure if I can get a couple of weeks (maybe a month tops) out of it, chances are DD-WRT is fine. if not, ill see if the Linksys WRT54GS v1.1 fairs any better once I replace the capacitors in it soon which ill likely be doing sometime next week.

17 hours ago, ThaCrip said:

WRT54GS v1.1 fairs any better once I replace the capacitors

Why would anyone waste time doing this?  Are you wanting to have a museum piece or something?

 

What could you possible be using that connects at G speeds?  Is your time and effort not worth a hundred times more than the $20 it would cost to get even the cheapest of current wifi routers that can do atleast modern wifi, N, AC..

@BudMan

 

My internet is nothing special to where Wireless G is much faster than it so there ain't much point in buying something faster and I got more time than $. besides at $5 I don't have much to lose besides a bit of my time and assuming all of that works I should be able to easily get several more years of use out of it.

 

even if I did get a newer router it's got to be compatible with DD-WRT etc.

 

p.s. some people are quite spoiled nowadays when they get several MB/s and think it's slow as I would be more than happy around 2-3MB/s when I currently get 0.42MB/s (420KB/s MAX) and even at 2-3MB/s, my current router could handle that. hell, even if my router handicapped speed a bit on a wired connection for example... it's LAN port limit of about 10MB/s, which is still very fast for just about any internet use short of large transfers over a local network for which gigabit LAN router ports would be a solid boost in that regard as while I would not mind getting a newer router that has gigabit LAN ports (or a bit faster WiFi for potential transfers over network), I am in no rush.

 

besides... how is reliability on newer routers in comparison to the older Wireless G kind? ; because I am the type who prefers hardware to last a long time as I am not that type who wants to upgrade every 2-4 years etc.

2 hours ago, ThaCrip said:

I currently get 0.42MB/s (420KB/s MAX) and even at 2-3MB/s, my current router could handle that. hell

What sort of nonsense connection is that.. You can't even stream SD netflix with such a ###### connection..

 

If you think this is fun, then sure have at it... But my time even if 20 minutes of it wouldn't be worth the effort to use such a ###### speed device... Don't get me wrong, the wrt54s were smoking in their day... 15, shoot almost 20 years ago now.. The first model was was 2002..  dd-wrt runs on modern hardware AC models..  You could get a tplink AC1750 gig router that ddwrt works on for less than $60.. I personally couldn't be bothered dicking with such an old piece of gear..  While your internet might be slow.. Your telling me you don't have any devices that could use N or AC for wifi.. 

37 minutes ago, BudMan said:

What sort of nonsense connection is that.. You can't even stream SD netflix with such a ###### connection

 

I am not a fan of streaming in general short of watching a occasional YouTube video, which works fine.

 

38 minutes ago, BudMan said:

While your internet might be slow.. Your telling me you don't have any devices that could use N or AC for wifi

 

With 420KB/s MAX download (call it around 400KB/s), it won't really matter from a general internet use standpoint whether I got Wireless G or some modern stuff since Wireless G easily exceeds my internet line speed. hell, even if it did not... just from a basic browsing websites point of view, once you reach a certain level of speed your 'fast enough' as it's not like your waiting there forever for a basic website page to load (like if one goes from near instant, call it a second or two or so, to maybe 5 seconds or so), it's not a big deal if you ask me). that's kind of why I figure once your internet line reaches a certain level of speed, I would rather pay less $ for a slower internet line if possible.

 

41 minutes ago, BudMan said:

You could get a tplink AC1750 gig router that ddwrt works on for less than $60

 

Sure, but around $50 is not exactly pocket change and I would rather put that $ towards future general computer hardware upgrades especially given my situation.

 

or I could put it this way... even if I was going to upgrade from Wireless G to a more modern router I would figure about $50 would be the high end of what I would pay for a router, as that's still reasonable, although I would feel much better around $20-30 or so which is quite reasonable. around $100 for a router is just way to much money when you can get something quite a bit cheaper and not all that much worse.

1 hour ago, ThaCrip said:

around $100 for a router is just way to much money

We come from different worlds then.. My router, which isn't even wireless was $750..  One of my AP was double $100 max budget of your, which not sure how you think that is too much for a wifi router..

 

All comes down to what you want/need it to do... Nothing on the market for a $100 that would do what I want..  But hey if you fine with redoing caps on a 20 year old antique.. Glad you having fun..

 

You could pick up something that is way better than some old wrt54g for a like $20..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AdGuard Family lifetime deal now only $14.97 by Steven Parker Today's highlighted Neowin Deal comes via our Apps + Software section, where you can get a lifetime subscription and save 91% on a lifetime AdGuard Family Plan. AdGuard is a unique program that has all the necessary features for what they claim to be "the best web experience." The software combines the an advanced ad blocker, a privacy protection module, and a parental control tool—all working in one app. This software deals with annoying ads, hides your data from a multitude of trackers, protects you from malware attacks, and even lets you restrict your kids from accessing inappropriate content. Install AdGuard and see the internet as it was supposed to be: clean and safe. Get rid of annoying banners, pop-ups & video ads once and for all Hide your data from the multitude of trackers & activity analyzers that swarm the web Avoid fraudulent and phishing website and malware attacks Protect your kids online by restricting them from accessing inappropriate & adult content Good to know Family Plan Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Max number of devices: 9 Access options: desktop & mobile Software version: AdGuard Family Updates included A lifetime subscription of AdGuard Family Plan normally costs $169.99, but this deal can be yours for just $14.97, that's a saving of $157.02. For full terms, specifications, and license info please click the link below. Get this AdGuard Family lifetime deal for just $14.97 (was $169.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. As an online publication, Neowin too relies on ads for operating costs and, if you use an ad blocker, we'd appreciate being whitelisted. In addition, we have an ad-free subscription for $28 a year, which is another way to show support! Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • Passkeys: Think of them like a broken heart necklace. Imagine one of those heart necklaces that breaks into two matching pieces. One person keeps one half, and the other person keeps the other half. With passkeys, the website has one half, and you have the other half. If the website gets hacked and someone steals its half, that stolen piece is useless by itself. It cannot unlock your account without your matching half. This particular heart necklace is one of a kind, there is only one in existence. Your half of the necklace has to be stored somewhere. It might be stored on your phone, tablet, computer, security key, or a password manager that can sync it between all your devices. A security key is a small physical device that you keep with you, kind of like a house key, car key, or flash drive. I would not usually recommend a security key as the first option for the average person. For most people, it is easier to use their phone, computer, or a password manager that can sync passkeys between their devices. A security key is more like a spare key you keep in a safe place, just in case you lose access to your other devices or your password manager. Some security keys plug into your computer. Some plug into your phone or tablet. Some get tapped against your device. The idea is simple: a security key can hold another passkey for the same website. Think of it like creating a second one-of-a-kind heart necklace for the same account. One necklace could be paired with your password manager, while another necklace could be paired with your security key. That means the website has more than one matching half on file. One half matches the passkey in your password manager. Another half matches the passkey stored on your security key. So, if you lose access to your phone, computer, or password manager, you would still be able to log in using the passkey stored on your security key. Think of it like keeping an extra special necklace piece on a tiny keychain, stored somewhere safe. The website still has the matching half for that security key, but your half is safely stored inside the little key. A passkey does not automatically exist on every device you own. It lives wherever you save it. If your half is stored on one device, then that device is the one that has the matching piece. For example, if you create the passkey on your Windows computer and it is only saved to that computer, your iPhone does not automatically have that same half. If you create it on your iPhone and it only stays on that iPhone, your Android phone does not automatically have it either. That is where password managers come in. A password manager can act like a protected jewelry box for your passkeys. Instead of your half of the necklace being locked to only one device, the password manager can securely sync that half to your other approved devices. For example, Apple Passwords and iCloud Keychain can sync passkeys between your Apple devices. Google Password Manager can sync passkeys with your Google account. But password managers such as 1Password and Bitwarden can sync passkeys between everything, your phones, tablets and computers. Now, you might ask: “What happens if I lose access to the device that has my passkey?” That depends on where your passkey was saved and what recovery options the website gives you. If your passkey was synced through a password manager, you may be able to sign in from another device that has access to that same password manager. For example, if your passkey is saved in iCloud Keychain, Google Password Manager, 1Password, or Bitwarden, another approved device may still have access to it. If your passkey was saved only on one phone, computer, or security key, and you lose that device, then you may not have your half of the necklace anymore. In that case, you would usually need to use the website’s backup login or account recovery options. A lot of websites that support passkeys still let you fall back to your regular password. So if you lose access to your passkey, the site may still let you log in with your password, a code sent to your email, a text message, a recovery code, or some other account recovery process. That is convenient, but it is also important to understand: if the website still allows password login, then your password still matters. Passkeys are safer than passwords, but if your account still has a password as a backup, you should still use a strong, unique password and turn on two-factor authentication if the website offers it. This is why it is a good idea to have more than one safe way back into important accounts. For example, you might keep your passkey in a syncing password manager, add a second trusted device, save recovery codes somewhere safe, or set up a backup security key. A passkey is very secure, but just like a real key, you need a backup plan in case you lose access to it. Now, you might ask: “What stops a hacker from copying my half of the necklace?” That’s the important part: your half is protected. It is not something you type in, and it is not something the website gets to keep. Think of your half as being locked inside a tiny safe on your phone, computer, security key, or password manager. That safe only opens when you approve it with your fingerprint, face, PIN, or device password. When you log in, the website does not need to see your half. It only needs proof that your half matches its half. Your actual half is not handed over to the website. This is different from a password. With a password, you type the secret into the website. If you type it into a fake website, the hacker now has it. With a passkey, you are not typing your secret into the website. Your device is proving you have the matching half without giving the half away. That also helps protect you from fake websites. If someone makes a fake login page that looks like the real site, your device can tell it is not the real match. It will not use your passkey there. Now, could someone use your passkey if they stole your device, got into your password manager, or somehow unlocked the safe that holds your half? Yes, that is why your device password, PIN, fingerprint, face unlock, and password manager security still matter. But a hacker cannot just steal your passkey from the website or trick you into typing it into a fake page like they can with a password. That is why passkeys are safer than passwords. The two matching pieces have to come together, like two lovebirds who were once separated and are finally reunited.
    • Newegg offers insane combo deal on Amazon Prime Day 2026 that beats Steam Machine by Sayan Sen Building a PC is undoubtedly difficult nowadays but with this epic combo deal, Newegg is trying to make it as easy for you as it is possible. If you are making a new one or even upgrading an old system to a new Windows 11 device, this combo bundle is truly unmissable as you get AMD's Ryzen 9800X3D, a compatible X870 motherboard, a 240mm AIO liquid cooler and finally a Samsung 990 PRO SSD all for under $1000 (purchase link under the specs table down below). This should beat out the newly launched Steam Machine from Valve in terms of performance and performance per dollar especially if you are willing to set Linux up on it. Essentially with this combo you will get the AMD Ryzen 7 9800X3D 8-core 3D V cache CPU, Samsung's 990 PRO 2TB NVMe SSD, the MSI MAG X870 TOMAHAWK WIFI ATX Motherboard, and finally the Cooler Master Elite Liquid 240. Thanks to that massive vertically stacked L3 cache, the X3D desktop processors, including the 9800X3D, also come with the benefit of not needing fast memory. Even DDR5-5600 should be plenty for it. The technical specifications of the Ryzen 7 9800X3D are given in the table below: Specification Value Architecture Zen 5 Cores / Threads 8 / 16 Base Clock 4.7 GHz Max Boost Clock Up to 5.2 GHz L1 Cache 640 KB L2 Cache 8 MB L3 Cache 96 MB Total Cache 104 MB CPU Core Process TSMC 4nm FinFET I/O Die Process TSMC 6nm FinFET Socket AM5 Default TDP 120W Max Temperature (Tjmax) 95°C Thermal Solution Not included Memory Type DDR5 Max Capacity 256 GB Memory Speeds 2x1R: DDR5-5600 2x2R: DDR5-5600 4x1R: DDR5-3600 4x2R: DDR5-3600 PCIe Version PCIe 5.0 PCIe Lanes (Total/Usable) 28 / 24 USB 3.2 Gen 2 (10Gbps) 4 USB 2.0 1 Graphics Cores 2 CU RDNA 2 Frequency 2200 MHz DisplayPort over USB-C Yes Overclocking Unlocked Up next we have the tech specs for the MSI MAG X870 TOMAHAWK WIFI Motherboard: Specification Value Chipset AMD X870 CPU Support AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors Socket AM5 Memory Slots 4 × DDR5 UDIMM Maximum Memory Capacity 256GB Memory Support DDR5 8400–5600 MT/s (OC), DDR5 5600–4800 MT/s (JEDEC) Integrated Graphics Outputs 1 × HDMI 2.1 FRL (up to 8K 60Hz) 2 × USB4 Type-C with DisplayPort 1.4 HBR3 (up to 4K 60Hz) Expansion Slots PCI_E1: PCIe 5.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (Chipset) PCI_E3: PCIe 4.0 x4 (Chipset) Audio Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-bit/384kHz playback on front panel S/PDIF output M.2 Slots 4 × M.2 M2_1: PCIe 5.0 x4 (CPU, 22110/2280) M2_2: PCIe 5.0 x4 (CPU, 2280/2260) M2_3: PCIe 4.0 x2 (Chipset, 2280/2260) M2_4: PCIe 4.0 x4 (Chipset, 2280/2260) SATA Ports 4 × SATA 6Gb/s RAID Support RAID 0, 1, 5, 10 for M.2 NVMe storage devices Rear USB Ports 4 × USB 2.0 3 × USB 5Gbps Type-A 2 × USB 10Gbps Type-A 1 × USB 10Gbps Type-C 2 × USB4 40Gbps Type-C Front USB Headers 4 × USB 2.0 4 × USB 5Gbps Type-A 1 × USB 20Gbps Type-C LAN Realtek 8126-CG 5G LAN Wireless Wi-Fi 7 (M.2 Key-E module pre-installed) Supports 2.4GHz / 5GHz / 6GHz bands Up to 5.8Gbps Supports 802.11 a/b/g/n/ac/ax/be Bluetooth Bluetooth 5.4, MLO, 4KQAM Internal Power Connectors 1 × 24-pin ATX Power 2 × CPU Power Connectors 1 × PCIe 8-pin Power Connector Fan Headers 1 × CPU Fan 1 × Combo Fan (Pump/System) 6 × System Fan RGB Headers 3 × Addressable V2 RGB (JARGB_V2) 1 × RGB LED (JRGB) Other Internal Headers 1 × EZ Conn-header 2 × Front Panel Headers 1 × Chassis Intrusion 1 × Front Audio 1 × TPM 2.0 Header Debug Features 4 × EZ Debug LEDs 1 × EZ Digit Debug LED Rear I/O Ports Clear CMOS Button Flash BIOS Button HDMI 2 × USB 40Gbps Type-C 1 × USB 10Gbps Type-C 4 × USB 10Gbps Type-A 3 × USB 5Gbps Type-A 4 × USB 2.0 5G LAN Port Wi-Fi/Bluetooth Antenna Connectors Audio Connectors Form Factor ATX The Samsung 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification Value Interface PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 Controller Samsung In-house Controller NAND Flash 3D TLC DRAM Cache 2GB LPDDR4 Sequential Read (Max) 7,450 MB/s Sequential Write (Max) 6,900 MB/s Random Read (4K) Up to 1,400,000 IOPS Random Write (4K) Up to 1,550,000 IOPS TBW (Endurance) 1,200 TBW MTBF 1,500,000 hours Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Shock Resistance 1,500G / 0.5ms Heatsink No Get the combo deal at this link: AMD Ryzen 7 9800X3D, Samsung 990 PRO 2TB, MSI MAG X870 TOMAHAWK WIFI motherboard, Cooler Master Elite Liquid 240: $784.99 + $25 off with promo code FTTF77: $759.99 (Sold and Shipped by Newegg US) Good to know This Newegg deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • I heard from a lot of people that driver support for the latest games when RDNA first came out (Radeon 5000 series) was pretty bad, but if you didn't buy the card on day one, or were not trying to play the latest titles, then you were isolated from that issue. Other than that, it's been good and only getting better.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      469
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!