Custom Android ROM


Recommended Posts

I know there are several out there.

 

But everything I see is shady, I don't get what this or that means.

 

Here is the phone I am trying to customize. ASUS Z00TD: http://specdevice.com/showspec.php?id=4868-a306-3855-870856b0f887

 

I see Lineage guides, but they do not tell you EVERYTHING you need to know.

 

https://forum.xda-developers.com/zenfone-2-laser/orig-development/rom-lineageos-15-0-t3666743

 

Can someone run me through this, or maybe I can just send it to you to get modded. (Did for a PSP once, friend installed like 100 enulation games on it, from NES, SNES, GB...)

Edited by Mindovermaster
Link to comment
https://www.neowin.net/forum/topic/1386426-custom-android-rom/
Share on other sites

  On 29/08/2019 at 02:54, Mindovermaster said:

Can someone run me through this

Expand  

You're going to need to be a bit more specific. Are you asking for a step-by-step guide, or is there a particular part that you need help with? When you say that it looks shady, which aspect are you referring to? You say that they do not tell you everything you need to know, what exactly do you need to know?

 

I've not installed Lineage on a phone before, but it's pretty much the idea that if you've installed one custom ROM you can install any others, so if you can provide more details I'd be happy to help.

Make sure your computer has working adb and fastboot. Setup instructions can be found here.

 

I am currently on ArcoLinux (based on Arch). I don't see adb and fastboot in AUR/Pacman.

 

https://wiki.lineageos.org/devices/bacon/install

Generally before you can flash a custom rom you need to do the following:

 

1. Backup your data

2. Unlock the boot loader (will usually wipe your device, hence backing up first)

3. Flash a custom recovery, this is TWRP for most devices.

4. Backup your stock rom

5. Flash a custom rom

 

The process will vary from device to device, however usually fastboot will be used to unlock your bootloader and flash a recovery.

 

You want to install the android-tools package which includes fastboot would seem: https://wiki.archlinux.org/index.php/Android#Flashing

 

After that you should be able to follow the tutorials on XDA for your device, the process can vary a bit depending on the device. However you generally need an unlocked bootloader and custom recovery.

 

Once you have both of these you can load the recovery on your device and flash a new rom any time you desire.

 

You have many choices for custom roms, generally i stick to the official LineageOS builds, however if these don't exist for your device then unofficial builds by trusted people in the XDA community are usually fine and well used.

  On 29/08/2019 at 12:36, Mindovermaster said:

Make sure your computer has working adb and fastboot. Setup instructions can be found here.

 

I am currently on ArcoLinux (based on Arch). I don't see adb and fastboot in AUR/Pacman.

 

https://wiki.lineageos.org/devices/bacon/install

Expand  

the 'android-tools' package is what you should look for; that is what includes those two tools :)

 

https://wiki.archlinux.org/index.php/Android

I can't find this on my phone.

 

  Quote

Setting up adb

To use adb with your device, you’ll need to enable developer options and USB debugging:

Open Settings, and select “About”.

Tap on “Build number” seven times.

Go back, and select “Developer options”.

Scroll down, and check the “Android debugging” or “USB debugging” entry under “Debugging”.

Plug your device into your computer.

On the computer, open up a terminal/command prompt and type adb devices.

A dialog should show on your device, asking you to allow usb debugging. Check “always allow”, and choose “OK”

Expand  

There's no "build number", and there is no option to change "developer options" or debugging.

 

When I plug my USB in the computer, it asks me on my phone if I want to set it to charging, file storage, picture storage, or MIDI.

 

I ran "abd devices" on my computer, in terminal, doesn't find anything.

https://www.syncios.com/android/how-to-enable-usb-debugging-on-asus-zenfone.html or https://www.asus.com/support/FAQ/1009474/

 

To be frank, if you cant bother to research a little bit and find this option, I would not recommend trying to flash a 3rd party ROM on your device. You're likely to brick it.

 

Setting up ADB and allowing USB debugging are some of the more basic tasks with Android and custom ROMs. You can easily brick your device, or bootloop your device by performing some of the initial tasks, fairly easily.

 

You'll need to:

Unlock the bootloader (Without using official ASUS app: https://forum.xda-developers.com/zenfone-2-laser/general/guide-unlock-bootloader-asus-unlock-app-t3405850 or ASUS official tool: https://www.asus.com/us/Phone/ZenFone-2-Laser-ZE551KL/HelpDesk_Download/) and yes, that is the correct link ASUS_Z00TD = ZE551KL = Z00T

Install a custom recovery (TWRP official https://forum.xda-developers.com/zenfone-2-laser/orig-development/recovery-twrp-3-0-0-0-touch-recovery-t3317513)

flash ROM of choice

Root (option, but generally needed for Lineage) (Root if running Marshmellow: https://forum.xda-developers.com/zenfone-2-laser/general/guide-marshmallow-root-guide-ze500kl-t3380461)

Edited by Circaflex
  • Like 2

Well, I would have looked this up, if I knew WHAT was involved. Like all you just said I had no idea about.

 

So you know about this? Teach me, my friend! (yeah, I know you already did, but...)

I got the USB Debug stuff working. Thanks to your link.

 

I ran this in terminal:

 

[mind@mind-Arco ~]$ adb devices
List of devices attached
FCAZCY153947	device

and

[mind@mind-Arco ~]$ adb shell
shell@ASUS_Z00T:/ $ 

Does that mean I am logged into my phone? I might do the command they have in this guide (that you posted)

 

without the knowledge of bootloader what this
and how to unlock the bootloader
and closing bootloader if required, the rest is probably completely useless
 

but is primarily aimed at developers who want to test their own programs or similar

nothing that ordinary users should do as the warranty can be lost if you make a mistake

  On 30/08/2019 at 00:48, Circaflex said:

https://www.syncios.com/android/how-to-enable-usb-debugging-on-asus-zenfone.html or https://www.asus.com/support/FAQ/1009474/

 

To be frank, if you cant bother to research a little bit and find this option, I would not recommend trying to flash a 3rd party ROM on your device. You're likely to brick it.

 

Setting up ADB and allowing USB debugging are some of the more basic tasks with Android and custom ROMs. You can easily brick your device, or bootloop your device by performing some of the initial tasks, fairly easily.

 

You'll need to:

Unlock the bootloader (Without using official ASUS app: https://forum.xda-developers.com/zenfone-2-laser/general/guide-unlock-bootloader-asus-unlock-app-t3405850 or ASUS official tool: https://www.asus.com/us/Phone/ZenFone-2-Laser-ZE551KL/HelpDesk_Download/) and yes, that is the correct link ASUS_Z00TD = ZE551KL = Z00T

Install a custom recovery (TWRP official https://forum.xda-developers.com/zenfone-2-laser/orig-development/recovery-twrp-3-0-0-0-touch-recovery-t3317513)

flash ROM of choice

Root (option, but generally needed for Lineage) (Root if running Marshmellow: https://forum.xda-developers.com/zenfone-2-laser/general/guide-marshmallow-root-guide-ze500kl-t3380461)

Expand  

i have tried the official application which is an apk file that unlocks the bootloader but then no way to return to being able to close the bootloader

 

I give you a tip leave the bootloader locked then you might possibly regret it then it will not be possible to lock the bootloader again myself also and I have been looking pretty good ASUS ZE520KL

  • 4 months later...
  On 30/08/2019 at 06:34, Christopher Andreason said:

i have tried the official application which is an apk file that unlocks the bootloader but then no way to return to being able to close the bootloader

 

I give you a tip leave the bootloader locked then you might possibly regret it then it will not be possible to lock the bootloader again myself also and I have been looking pretty good ASUS ZE520KL

Expand  

I have actually found a custom ROM (based on Android 10, oddly enough) that has displaced stock; however, it displaced stock by being a better stock - Havoc OS 3.1 (unofficial for Pixel 3a). I have it set up the same way (and with the same apps) that I did with stock - in short, I changed nothing compared to stock.

 

The big win for Havoc compared to stock is a common feature - VoLTE support.  As I said; this is something that is dead-stock in Android 10.  However, VoLTE in Havoc has better detection for users (in fact, it has a nice large flag to show it being active; stock doesn't do that).  Further, stock VoLTE has issues with telephony modems in stock Android - which means that you wind up turning it off. So far, I haven't had to turn it off - at all, which is despite the nearest wi-fi AP being a telephony modem in my own house.  VoLTE includes VoWifi (which is why telephony modem support can be critical); Monday will be a real "acid test"; I have chemotherapy that day which runs over five hours; if I have to make calls (or anyone needs to call me), VoWifi is the ONLY way I can be reached - standard LTE sucketh that bad.

  On 26/01/2020 at 02:02, PGHammer said:

I have actually found a custom ROM (based on Android 10, oddly enough) that has displaced stock; however, it displaced stock by being a better stock - Havoc OS 3.1 (unofficial for Pixel 3a). I have it set up the same way (and with the same apps) that I did with stock - in short, I changed nothing compared to stock.

 

The big win for Havoc compared to stock is a common feature - VoLTE support.  As I said; this is something that is dead-stock in Android 10.  However, VoLTE in Havoc has better detection for users (in fact, it has a nice large flag to show it being active; stock doesn't do that).  Further, stock VoLTE has issues with telephony modems in stock Android - which means that you wind up turning it off. So far, I haven't had to turn it off - at all, which is despite the nearest wi-fi AP being a telephony modem in my own house.  VoLTE includes VoWifi (which is why telephony modem support can be critical); Monday will be a real "acid test"; I have chemotherapy that day which runs over five hours; if I have to make calls (or anyone needs to call me), VoWifi is the ONLY way I can be reached - standard LTE sucketh that bad.

Expand  

Followup: When I needed to be picked up from my infusion center, I called home.  (Remember, I mentioned that I have to use VoWifi, because standard LTE sucks from that particular location.)  VoWifi, however, works - when connecting to a cell phone - it would NOT connect to a landline at the same location as the cell phone in question.  Therefore, advantage: Havoc - even over stock Android 10.

  • 11 months later...

This topic was automatically locked because it did not receive any replies for a year. If you want to have this topic reopened

  • please contact any staff moderator or
  • report the first post of the topic with the reason why it should be reopened.

Thank you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • KB5060829: Microsoft confirms new upcoming Windows 11 24H2 feature is triggering Firewall by Sayan Sen At the end of June, Microsoft released Windows 11 setup and recovery updates (KB5062233/ KB5060843/ KB5062197/ KB5061090) following the month's non-security previews for 24H2 (KB5060829) and 23H2/22H2 (KB5060826). Today, the company has confirmed that KB5060829 is causing some troubles for systems in regards to Firewall. Microsoft says that IT admins and system admins may notice a recurring error entry in the Security event log related to Windows Firewall With Advanced Security wherein the Event Viewer records event ID 2042, labeled “Config Read Failed” with the message “More data is available” each time the device restarts. Although logged as an error, the tech giant notes that this entry does not indicate a malfunction of the Windows Firewall and as such it can be "safely ignored and disregarded," and that Windows Firewall continues to enforce rules and filter network traffic normally as intended. Microsoft assures that "there is no impact to Windows processes associated to this event." IT support teams and even general users often rely on error-level event entries to detect misconfiguration and other issues (Microsoft itself recommends you do so), so unexpected log noise can trigger unnecessary alerts like these. Interestingly, in this case, the logged event stems from an upcoming feature as Microsoft notes that the "event is related to a feature that is currently under development and not fully implemented." No additional information regarding this new feature has been provided at this time. For those who prefer a cleaner log, administrators can filter out event 2042 in Event Viewer or via PowerShell. In Event Viewer, create a custom view filtering out ID 2042 under the Security log and in PowerShell, use the Get-WinEvent -FilterHashtable parameter. Microsoft says that the team is currently working on a fix and an update will be released later. However, no ETA has been shared today. You can find the issue entry here on Microsoft's official Windows Health dashboard website.
    • Concerning the situation at XBOX (title cancellations, studio closures and firing employees): The management at MS gaming division (Booty, Spencer etc.) has to go. Money and time has been wasted in such amounts that those people have to be held accountable and better managers can take the lead. In most other businesses this would have happened ten years or so ago.
    • Why, because different bothers you? You aren’t using the OS per your own admission so why is it a shame? It’s a great way to focus imo.
    • People often hate on what they don’t understand. It’s not stupid, it’s different. That said, ignorance more often than not rules the roost, so it is seen as stupid instead. How much time have you spent learning how to use macOS as intended before making your proclamation?
    • Though, to be fair, maybe I'm biased and maybe my trust would eventually turn out to be misplaced, but I'd be certainly inclined to trust Microsoft's solution a lot more than I trust Opera's, for a multitude of reasons. Hell, I trust Microsoft more than I trust say Google lately.
  • Recent Achievements

    • Reacting Well
      SteveJaye earned a badge
      Reacting Well
    • One Month Later
      MadMung0 earned a badge
      One Month Later
    • One Month Later
      Uranus_enjoyer earned a badge
      One Month Later
    • Week One Done
      Philsl earned a badge
      Week One Done
    • Week One Done
      Jaclidio hoy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      434
    2. 2
      ATLien_0
      158
    3. 3
      +FloatingFatMan
      146
    4. 4
      Nick H.
      65
    5. 5
      +thexfile
      62
  • Tell a friend

    Love Neowin? Tell a friend!