High CPU temp in idle mode on Asus-notebook: 80-85+ Celsius


Recommended Posts

I was wondering... what can be causes for a (very) high CPU-temp in idle mode?

Speccy reports on most occasions 80-85+ Celsius temps (sometimes even 94/95 degrees). And the fans are making quite some noise.

 

I have a notebook from February 2014 (so basically 6 years old). Usage is moderate to high, I use it everyday (mostly Office-like apps, but also some gaming).

 

I already have cleaned and compressed air'ed the insides, the CPU and GPU (incl. new paste).

Can I better look out for a new notebook? Or try to fix/repair some components, and which one?

 

Or ii my Asus-notebook slowly dying on me, or is there something else?

When it's idle, what's the CPU usage? Are you running Windows? There could be a process using CPU causing high temps. When you say you've used compressed air, have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

 

You also made sure to replace any strips of tape covering the gap between fan shroud and heatsink (if fitted). This tape seals an air gap that can cause air leakage, causing high temps as the air isn't directed through the sink properly, resulting in a razzing fan, increasing temps, and shutdowns. Some laptops have a cheaper strip of tape, some have the fan shroud actually covering the sink. Asus and Acer are known to be the cheaper option of tape.

11 hours ago, Tidosho said:

When it's idle, what's the CPU usage? Are you running Windows? There could be a process using CPU causing high temps. When you say you've used compressed air, have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

 

You also made sure to replace any strips of tape covering the gap between fan shroud and heatsink (if fitted). This tape seals an air gap that can cause air leakage, causing high temps as the air isn't directed through the sink properly, resulting in a razzing fan, increasing temps, and shutdowns. Some laptops have a cheaper strip of tape, some have the fan shroud actually covering the sink. Asus and Acer are known to be the cheaper option of tape.

I am running Windows 10, 1909

I have not removed the heatsink, just the CPU and CPU and put new thermal paste on it. I thought removing and cleaning them is a little tricky...

 

TaskManagerCPU.jpg

well your machine isnt idle for a start it still has usage, and i would use something that can show you what each of the core temp is, because that just shows 70C....well what about the other 3 cores?

1 minute ago, DKAngel said:

well your machine isnt idle for a start it still has usage, and i would use something that can show you what each of the core temp is, because that just shows 70C....well what about the other 3 cores?

Is there an app/program for I can use?

So all cores are overheating. As I said above, the fan might be failing, working hard to dispate the heat, but is running hot.

 

Do you ever run a heating pad or a stand blowing cool air into the bottom of the laptop? That might cool it down. But at the rate you are going, I don't think that will help much.

yeah fans may be failing or full of dust; I'd open it up and clean out any dust if you haven't already (sounds like you have done this though). CPU may also need some new paste. I've seen in the past were cheap or no paste has been applied for laptops; it's not always given the same quality as desktops depending on the OEM so worth checking.

 

edit: just re-read the OP and see the notebook is from 2014; it may just be reaching the end of its ropes then. Looking out for a replacement machine may not be a bad idea if cleaning and new paste haven't helped.

13 minutes ago, Brandon H said:

yeah fans may be failing or full of dust; I'd open it up and clean out any dust if you haven't already (sounds like you have done this though). CPU may also need some new paste. I've seen in the past were cheap or no paste has been applied for laptops; it's not always given the same quality as desktops depending on the OEM so worth checking.

 

edit: just re-read the OP and see the notebook is from 2014; it may just be reaching the end of its ropes then. Looking out for a replacement machine may not be a bad idea if cleaning and new paste haven't helped.

he is looking for a new one. Coupl;e threads down from here ;) 

 

19 hours ago, Tidosho said:

have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

8 hours ago, kiddingguy said:

I have not removed the heatsink, just the CPU and CPU and put new thermal paste on it. I thought removing and cleaning them is a little tricky...

If you haven't removed the fan from the heatsink, then I can say for near certainty that the issue is what Tidosho mentioned.

 

I have a 7-8 years old asus laptop and it too was recently running very hot and sounding like a jet engine, and even shutting itself down while doing something as trivial as watching a youtube video at high resolutions. I took it apart and dismantled the cooler and as Tidosho wrote, there was a thick blanket between the fan and the heatsink, blocking the airflow. I removed it and the overheating issue was gone. I didn't even bother with reapplying the thermal paste.

4 hours ago, eddman said:

If you haven't removed the fan from the heatsink, then I can say for near certainty that the issue is what Tidosho mentioned.

 

I have a 7-8 years old asus laptop and it too was recently running very hot and sounding like a jet engine, and even shutting itself down while doing something as trivial as watching a youtube video at high resolutions. I took it apart and dismantled the cooler and as Tidosho wrote, there was a thick blanket between the fan and the heatsink, blocking the airflow. I removed it and the overheating issue was gone. I didn't even bother with reapplying the thermal paste.

I have ordered a new fan. Let's see if that helps. Keep you all updated.

There was indeed a lot of dust between the fan and the exit of air. I cleaned it (also the GPU one).

I also replaced the fan with a new one.

 

Temps are (way) down. Let's see it this will be kept. Hopefully yes.

  • Like 2
3 hours ago, kiddingguy said:

I reinstalled Windows. Temps are now between 55-68 Celsius.

A little 'hotter' than earlier mentioned, but still quite OK I guess for machine 6 years old. Right?

Is that 55-68C on idle, or on load?

 

Try Prime95. See what it does on load. ;)

  • 11 months later...

This topic was automatically locked because it did not receive any replies for a year. If you want to have this topic reopened

  • please contact any staff moderator or
  • report the first post of the topic with the reason why it should be reopened.

Thank you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft fixes one of Excel Copilot's most frustrating limitations by Usama Jawad Microsoft began integrating Copilot into Excel a couple of years ago and has been upgrading it with new functionalities since then. While some changes have been controversial, Microsoft is hoping to win over users by allowing them to be more productive via Copilot. To that end, it has now announced a Copilot improvement that may actually be appreciated by people who use it regularly. Excel customers often use the Copilot prompt box to issue instructions to format and customize their data, but it can become quite tiring to keep repeating the same instructions again and again. Microsoft now allows you to define Copilot personalization rules for formatting, naming conventions, formulas, and report styles. These can be accessed via Settings > Personalization, where you can explain your rules in natural language like "Always format currency in USD with no decimals", and just let Copilot take care of the rest. Microsoft is going a step further in this direction by allowing you to set workbook rules too. These rules are stored as a .Rules sheet, and are preserved while the workbook is shared. This fosters collaboration while making sure that standard rules govern the Copilot editing experience across the organization. Other advantages of this capability include pointing it to specific examples, defining dynamic formulas, and referencing an entire sheet and asking Copilot to infer rules based on that. You can leverage this feature by opening Copilot in Excel, clicking on "+", and selecting Create workbook rules. If you have an existing .Rules sheet, you can simply start listing the rules in column A as well. Personalization features are available to all Copilot in Excel users across the web, Mac, and Windows. Meanwhile, workbook rules are currently being previewed for Windows and Mac customers on the Insiders channel. General availability is scheduled after a few weeks, but a concrete date is currently unknown. Overall, the Excel capability is quite similar to ChatGPT's memory features, which allow you to permanently store items in the AI model's context window.
    • Imagine you still haven't discovered Total Commander that is doing all those things for three decades already...
    • This sounds like underneath the nice marketing spin, either someone at Adobe got tired of their lazy devs and asked Microsoft to help them sort at least some of Adobe's ancestral spaghetti code to make it go faster, or Microsoft wanted Adobe's crap to run better on Windows to make it look better when compared to Apple, so they offered to intervene. Either way, GOOD.
    • My favorite file manager for Windows 11 finally gets a long-requested feature by Taras Buria Files is among the best File Explorer alternatives for Windows 10 and 11. This free app is packed with all sorts of features and conveniences, but there is one crucial feature that is still missing—Tree View. Fortunately, the latest update in the Preview channel finally delivers it. With version 4.1.4, which is now available for download in the Preview channel, developers implemented Tree View, a new mode that displays folders in an expandable hierarchy. Windows 11's stock File Explorer always had this feature, but it was nowhere to be found in Files until now. Starting with the latest preview update, you can expand each drive and its nested folders without leaving the current location and then open the folder you need in the main view. To try Tree View in Files, update the app to the latest preview version, then click the small arrow next to a drive to expand its content. The developers say they are rolling out Tree View in Preview first to gather feedback from users and improve the feature before bringing it to all in the stable channel. In addition to Tree View, Files 4.1.14 improves the Windows Fonts folder. You can now preview each font directly in Files with no need to open the built-in font viewer. For now, these two features are only available in the Preview channel. For those using the stable release, developers recently released version 4.1.3, with improvements for the built-in tag system, on-demand folder size calculation, and plenty of various fixes. You can check out the full release notes here. You can download Files from the Microsoft Store (paid version) or its official website (free).
    • Who is paying for this 30x scale-up? Its sounds expensive.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!