High CPU temp in idle mode on Asus-notebook: 80-85+ Celsius


Recommended Posts

I was wondering... what can be causes for a (very) high CPU-temp in idle mode?

Speccy reports on most occasions 80-85+ Celsius temps (sometimes even 94/95 degrees). And the fans are making quite some noise.

 

I have a notebook from February 2014 (so basically 6 years old). Usage is moderate to high, I use it everyday (mostly Office-like apps, but also some gaming).

 

I already have cleaned and compressed air'ed the insides, the CPU and GPU (incl. new paste).

Can I better look out for a new notebook? Or try to fix/repair some components, and which one?

 

Or ii my Asus-notebook slowly dying on me, or is there something else?

When it's idle, what's the CPU usage? Are you running Windows? There could be a process using CPU causing high temps. When you say you've used compressed air, have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

 

You also made sure to replace any strips of tape covering the gap between fan shroud and heatsink (if fitted). This tape seals an air gap that can cause air leakage, causing high temps as the air isn't directed through the sink properly, resulting in a razzing fan, increasing temps, and shutdowns. Some laptops have a cheaper strip of tape, some have the fan shroud actually covering the sink. Asus and Acer are known to be the cheaper option of tape.

11 hours ago, Tidosho said:

When it's idle, what's the CPU usage? Are you running Windows? There could be a process using CPU causing high temps. When you say you've used compressed air, have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

 

You also made sure to replace any strips of tape covering the gap between fan shroud and heatsink (if fitted). This tape seals an air gap that can cause air leakage, causing high temps as the air isn't directed through the sink properly, resulting in a razzing fan, increasing temps, and shutdowns. Some laptops have a cheaper strip of tape, some have the fan shroud actually covering the sink. Asus and Acer are known to be the cheaper option of tape.

I am running Windows 10, 1909

I have not removed the heatsink, just the CPU and CPU and put new thermal paste on it. I thought removing and cleaning them is a little tricky...

 

TaskManagerCPU.jpg

well your machine isnt idle for a start it still has usage, and i would use something that can show you what each of the core temp is, because that just shows 70C....well what about the other 3 cores?

1 minute ago, DKAngel said:

well your machine isnt idle for a start it still has usage, and i would use something that can show you what each of the core temp is, because that just shows 70C....well what about the other 3 cores?

Is there an app/program for I can use?

So all cores are overheating. As I said above, the fan might be failing, working hard to dispate the heat, but is running hot.

 

Do you ever run a heating pad or a stand blowing cool air into the bottom of the laptop? That might cool it down. But at the rate you are going, I don't think that will help much.

yeah fans may be failing or full of dust; I'd open it up and clean out any dust if you haven't already (sounds like you have done this though). CPU may also need some new paste. I've seen in the past were cheap or no paste has been applied for laptops; it's not always given the same quality as desktops depending on the OEM so worth checking.

 

edit: just re-read the OP and see the notebook is from 2014; it may just be reaching the end of its ropes then. Looking out for a replacement machine may not be a bad idea if cleaning and new paste haven't helped.

13 minutes ago, Brandon H said:

yeah fans may be failing or full of dust; I'd open it up and clean out any dust if you haven't already (sounds like you have done this though). CPU may also need some new paste. I've seen in the past were cheap or no paste has been applied for laptops; it's not always given the same quality as desktops depending on the OEM so worth checking.

 

edit: just re-read the OP and see the notebook is from 2014; it may just be reaching the end of its ropes then. Looking out for a replacement machine may not be a bad idea if cleaning and new paste haven't helped.

he is looking for a new one. Coupl;e threads down from here ;) 

 

19 hours ago, Tidosho said:

have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

8 hours ago, kiddingguy said:

I have not removed the heatsink, just the CPU and CPU and put new thermal paste on it. I thought removing and cleaning them is a little tricky...

If you haven't removed the fan from the heatsink, then I can say for near certainty that the issue is what Tidosho mentioned.

 

I have a 7-8 years old asus laptop and it too was recently running very hot and sounding like a jet engine, and even shutting itself down while doing something as trivial as watching a youtube video at high resolutions. I took it apart and dismantled the cooler and as Tidosho wrote, there was a thick blanket between the fan and the heatsink, blocking the airflow. I removed it and the overheating issue was gone. I didn't even bother with reapplying the thermal paste.

4 hours ago, eddman said:

If you haven't removed the fan from the heatsink, then I can say for near certainty that the issue is what Tidosho mentioned.

 

I have a 7-8 years old asus laptop and it too was recently running very hot and sounding like a jet engine, and even shutting itself down while doing something as trivial as watching a youtube video at high resolutions. I took it apart and dismantled the cooler and as Tidosho wrote, there was a thick blanket between the fan and the heatsink, blocking the airflow. I removed it and the overheating issue was gone. I didn't even bother with reapplying the thermal paste.

I have ordered a new fan. Let's see if that helps. Keep you all updated.

There was indeed a lot of dust between the fan and the exit of air. I cleaned it (also the GPU one).

I also replaced the fan with a new one.

 

Temps are (way) down. Let's see it this will be kept. Hopefully yes.

  • Like 2
3 hours ago, kiddingguy said:

I reinstalled Windows. Temps are now between 55-68 Celsius.

A little 'hotter' than earlier mentioned, but still quite OK I guess for machine 6 years old. Right?

Is that 55-68C on idle, or on load?

 

Try Prime95. See what it does on load. ;)

  • 11 months later...

This topic was automatically locked because it did not receive any replies for a year. If you want to have this topic reopened

  • please contact any staff moderator or
  • report the first post of the topic with the reason why it should be reopened.

Thank you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Can you read? I've said I'm willing to pay more for a notchless (no notch) 3:2 screen.
    • Not even an OLED display on the laptops. Also it seems that the laptop design isn't the same as the Surface Ultra model. Looks like bargain bin at high prices.
    • make your own notch - it's not that hard
    • VirtualBox 7.2.10 by Razvan Serea VirtualBox is a powerful x86 and AMD64/Intel64 virtualization product for enterprise as well as home use. Targeted at server, desktop and embedded use, it is now the only professional-quality virtualization solution that is also Open Source Software. Presently, VirtualBox runs on Windows, Linux, macOS, and Solaris hosts and supports a large number of guest operating systems including but not limited to Windows (NT 4.0, 2000, XP, Server 2003, Vista, 7, 8, Windows 10 and Windows 11), DOS/Windows 3.x, Linux (2.4, 2.6, 3.x, 4.x, 5.x and 6.x), Solaris and OpenSolaris, OS/2, OpenBSD, NetBSD and FreeBSD. Some of the features of VirtualBox are: Modularity. VirtualBox has an extremely modular design with well-defined internal programming interfaces and a client/server design. This makes it easy to control it from several interfaces at once: for example, you can start a virtual machine in a typical virtual machine GUI and then control that machine from the command line, or possibly remotely. VirtualBox also comes with a full Software Development Kit: even though it is Open Source Software, you don't have to hack the source to write a new interface for VirtualBox. Virtual machine descriptions in XML. The configuration settings of virtual machines are stored entirely in XML and are independent of the local machines. Virtual machine definitions can therefore easily be ported to other computers. VirtualBox 7.2.10 changelog: VMM: Fixed issue when CentOS 10 VM was not booting due to the message "Fatal glibc error: CPU does not support x86-64-v3" (​github:gh-642) Devices/EFI: Fixed booting issue when ARM VM had less than 1024 MiB of RAM assigned (​github:gh-679) USB: Fixed issue when it was not possible to attach USB device to headless VM on Apple Silicon/macOS 26.4.1 (​github:gh-631) Storage: Fixed issue when VIRTIO-SCSI device was not recognized as SSD device by guest system (​github:gh-634) Network: Fixed issue in E1000 emulation code which triggered debug log creation (​github:gh-645) Network: Fixed issue in E1000 emulation code which prevented OS/2 guest from booting (​github:gh-683) Linux Host: Fixed issue when VMs could not be started due to kernel oops (​github:gh-639) Linux Host and Guest: Fixed issue when kernel modules were failing to build with openSUSE 16.0 kernel Linux Host and Guest: Added initial support for kernel 7.1 Linux Host and Guest: Added extra fixes for RHEL 9.8 kernel (​github:gh-676) Linux Host and Guest: Added possibility to build source code using NASM instead of YASM as the assembler (​github:gh-520) Linux Guest Additions: Added initial support for Extended Data Control Protocol for clipboard sharing with Plasma on Wayland guests (​github:gh-33) Linux Guest Additions: Added extra fixes for preventing vboxvideo kernel module build with kernel version 7.0 and newer (​github:gh-655) OS/2 Guest Additions: Fixed issue when Shared Folders automount and clipboard sharing stopped working (​github:gh-551) Download: VirtualBox 7.2.10 | 170.0 MB (Open Source) Download: VirtualBox 7.2.10 Extension Pack | 19.1 MB View: VirtualBox Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • OK, now ask yourself how are they going to enforce that law? By requiring every single adult to prove their age and provide their legal identity documents to an UNREGULATED 3rd party company that already has a long track record of multiple data breaches. Not to mention, parliament have voted AGAINST this ban, twice, and Starmer is going ahead anyway. So, where's the democracy here, because that looks like dictatorship to me. The solution here is parental responsibility, not government control. Run some public service announcements on TV and UK social media teaching parents how to setup parental controls. That's already been proven to actually work. But the, this is not and has NEVER been about keeping kids safe. It's about control and monitoring. Watching what you're doing online and controlling what you can see and what you can say.
  • Recent Achievements

    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
    • First Post
      Dys Topia earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      525
    2. 2
      +Edouard
      180
    3. 3
      PsYcHoKiLLa
      105
    4. 4
      Steven P.
      89
    5. 5
      ATLien_0
      70
  • Tell a friend

    Love Neowin? Tell a friend!