High CPU temp in idle mode on Asus-notebook: 80-85+ Celsius


Recommended Posts

I was wondering... what can be causes for a (very) high CPU-temp in idle mode?

Speccy reports on most occasions 80-85+ Celsius temps (sometimes even 94/95 degrees). And the fans are making quite some noise.

 

I have a notebook from February 2014 (so basically 6 years old). Usage is moderate to high, I use it everyday (mostly Office-like apps, but also some gaming).

 

I already have cleaned and compressed air'ed the insides, the CPU and GPU (incl. new paste).

Can I better look out for a new notebook? Or try to fix/repair some components, and which one?

 

Or ii my Asus-notebook slowly dying on me, or is there something else?

When it's idle, what's the CPU usage? Are you running Windows? There could be a process using CPU causing high temps. When you say you've used compressed air, have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

 

You also made sure to replace any strips of tape covering the gap between fan shroud and heatsink (if fitted). This tape seals an air gap that can cause air leakage, causing high temps as the air isn't directed through the sink properly, resulting in a razzing fan, increasing temps, and shutdowns. Some laptops have a cheaper strip of tape, some have the fan shroud actually covering the sink. Asus and Acer are known to be the cheaper option of tape.

11 hours ago, Tidosho said:

When it's idle, what's the CPU usage? Are you running Windows? There could be a process using CPU causing high temps. When you say you've used compressed air, have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

 

You also made sure to replace any strips of tape covering the gap between fan shroud and heatsink (if fitted). This tape seals an air gap that can cause air leakage, causing high temps as the air isn't directed through the sink properly, resulting in a razzing fan, increasing temps, and shutdowns. Some laptops have a cheaper strip of tape, some have the fan shroud actually covering the sink. Asus and Acer are known to be the cheaper option of tape.

I am running Windows 10, 1909

I have not removed the heatsink, just the CPU and CPU and put new thermal paste on it. I thought removing and cleaning them is a little tricky...

 

TaskManagerCPU.jpg

well your machine isnt idle for a start it still has usage, and i would use something that can show you what each of the core temp is, because that just shows 70C....well what about the other 3 cores?

1 minute ago, DKAngel said:

well your machine isnt idle for a start it still has usage, and i would use something that can show you what each of the core temp is, because that just shows 70C....well what about the other 3 cores?

Is there an app/program for I can use?

So all cores are overheating. As I said above, the fan might be failing, working hard to dispate the heat, but is running hot.

 

Do you ever run a heating pad or a stand blowing cool air into the bottom of the laptop? That might cool it down. But at the rate you are going, I don't think that will help much.

yeah fans may be failing or full of dust; I'd open it up and clean out any dust if you haven't already (sounds like you have done this though). CPU may also need some new paste. I've seen in the past were cheap or no paste has been applied for laptops; it's not always given the same quality as desktops depending on the OEM so worth checking.

 

edit: just re-read the OP and see the notebook is from 2014; it may just be reaching the end of its ropes then. Looking out for a replacement machine may not be a bad idea if cleaning and new paste haven't helped.

13 minutes ago, Brandon H said:

yeah fans may be failing or full of dust; I'd open it up and clean out any dust if you haven't already (sounds like you have done this though). CPU may also need some new paste. I've seen in the past were cheap or no paste has been applied for laptops; it's not always given the same quality as desktops depending on the OEM so worth checking.

 

edit: just re-read the OP and see the notebook is from 2014; it may just be reaching the end of its ropes then. Looking out for a replacement machine may not be a bad idea if cleaning and new paste haven't helped.

he is looking for a new one. Coupl;e threads down from here ;) 

 

19 hours ago, Tidosho said:

have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

8 hours ago, kiddingguy said:

I have not removed the heatsink, just the CPU and CPU and put new thermal paste on it. I thought removing and cleaning them is a little tricky...

If you haven't removed the fan from the heatsink, then I can say for near certainty that the issue is what Tidosho mentioned.

 

I have a 7-8 years old asus laptop and it too was recently running very hot and sounding like a jet engine, and even shutting itself down while doing something as trivial as watching a youtube video at high resolutions. I took it apart and dismantled the cooler and as Tidosho wrote, there was a thick blanket between the fan and the heatsink, blocking the airflow. I removed it and the overheating issue was gone. I didn't even bother with reapplying the thermal paste.

4 hours ago, eddman said:

If you haven't removed the fan from the heatsink, then I can say for near certainty that the issue is what Tidosho mentioned.

 

I have a 7-8 years old asus laptop and it too was recently running very hot and sounding like a jet engine, and even shutting itself down while doing something as trivial as watching a youtube video at high resolutions. I took it apart and dismantled the cooler and as Tidosho wrote, there was a thick blanket between the fan and the heatsink, blocking the airflow. I removed it and the overheating issue was gone. I didn't even bother with reapplying the thermal paste.

I have ordered a new fan. Let's see if that helps. Keep you all updated.

There was indeed a lot of dust between the fan and the exit of air. I cleaned it (also the GPU one).

I also replaced the fan with a new one.

 

Temps are (way) down. Let's see it this will be kept. Hopefully yes.

  • Like 2
3 hours ago, kiddingguy said:

I reinstalled Windows. Temps are now between 55-68 Celsius.

A little 'hotter' than earlier mentioned, but still quite OK I guess for machine 6 years old. Right?

Is that 55-68C on idle, or on load?

 

Try Prime95. See what it does on load. ;)

  • 11 months later...

This topic was automatically locked because it did not receive any replies for a year. If you want to have this topic reopened

  • please contact any staff moderator or
  • report the first post of the topic with the reason why it should be reopened.

Thank you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Rockstar gives last-gen GTA V players free upgrades tomorrow by Pulasthi Ariyasinghe Rockstar is preparing to launch Grand Theft Auto VI later this year, but ahead of that, the company has revealed a new offer for some Grand Theft Auto V owners. It today announced that Xbox One and PlayStation 4 version owners of the 2013-released title will soon be receiving a free upgrade to the current generation version. The studio released the Xbox Series X|S and PlayStation 5 version of Grand Theft Auto V back in 2022, bringing significant upgrades to the original console editions. This included 60 FPS gameplay at up to 4K resolution, as well as major upgrades to textures, draw distance, and audio. Faster load times, ray tracing elements, and HDR support were also added with it. While this new and enhanced version needed a new purchase of the game to jump in, now Rockstar has decided to make it a free upgrade, dropping the $40 price tag entirely on consoles. "Beginning tomorrow, those who own any PS4 version or the digital Xbox One version of Grand Theft Auto V will be able to upgrade to the PS5 or Xbox Series X|S versions at no additional cost, and experience the best versions of GTA V and GTA Online," said the company in an official blog post. The free upgrade offer will be released tomorrow, June 18, for all Xbox One and PlayStation 4 owners of Grand Theft Auto V. Players who will be jumping in on the offer will want to check how to migrate their GTA Online profile from last-generation to current-generation consoles by heading over here. The offer lands ahead of The Kortz Center Heist hitting Grand Theft Auto Online, where players and crews will be tasked with stealing priceless international art from a prestigious gallery in Pacific Bluffs. It doesn't look like Rockstar plans to stop updating its previous game even with Grand Theft Auto VI being on the horizon. The latest title is slated to launch on November 19, 2026, across Xbox Series X|S and PlayStation 5.
    • Now comes with a money back guarantee instead of a replacement! Hah
    • Rufus 4.15.2391 Beta by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2391 Beta changelog: Improve the guards for using the "silent" option Improve the ability to cancel during write retries Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      510
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!