High CPU temp in idle mode on Asus-notebook: 80-85+ Celsius


Recommended Posts

I was wondering... what can be causes for a (very) high CPU-temp in idle mode?

Speccy reports on most occasions 80-85+ Celsius temps (sometimes even 94/95 degrees). And the fans are making quite some noise.

 

I have a notebook from February 2014 (so basically 6 years old). Usage is moderate to high, I use it everyday (mostly Office-like apps, but also some gaming).

 

I already have cleaned and compressed air'ed the insides, the CPU and GPU (incl. new paste).

Can I better look out for a new notebook? Or try to fix/repair some components, and which one?

 

Or ii my Asus-notebook slowly dying on me, or is there something else?

When it's idle, what's the CPU usage? Are you running Windows? There could be a process using CPU causing high temps. When you say you've used compressed air, have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

 

You also made sure to replace any strips of tape covering the gap between fan shroud and heatsink (if fitted). This tape seals an air gap that can cause air leakage, causing high temps as the air isn't directed through the sink properly, resulting in a razzing fan, increasing temps, and shutdowns. Some laptops have a cheaper strip of tape, some have the fan shroud actually covering the sink. Asus and Acer are known to be the cheaper option of tape.

11 hours ago, Tidosho said:

When it's idle, what's the CPU usage? Are you running Windows? There could be a process using CPU causing high temps. When you say you've used compressed air, have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

 

You also made sure to replace any strips of tape covering the gap between fan shroud and heatsink (if fitted). This tape seals an air gap that can cause air leakage, causing high temps as the air isn't directed through the sink properly, resulting in a razzing fan, increasing temps, and shutdowns. Some laptops have a cheaper strip of tape, some have the fan shroud actually covering the sink. Asus and Acer are known to be the cheaper option of tape.

I am running Windows 10, 1909

I have not removed the heatsink, just the CPU and CPU and put new thermal paste on it. I thought removing and cleaning them is a little tricky...

 

TaskManagerCPU.jpg

well your machine isnt idle for a start it still has usage, and i would use something that can show you what each of the core temp is, because that just shows 70C....well what about the other 3 cores?

1 minute ago, DKAngel said:

well your machine isnt idle for a start it still has usage, and i would use something that can show you what each of the core temp is, because that just shows 70C....well what about the other 3 cores?

Is there an app/program for I can use?

So all cores are overheating. As I said above, the fan might be failing, working hard to dispate the heat, but is running hot.

 

Do you ever run a heating pad or a stand blowing cool air into the bottom of the laptop? That might cool it down. But at the rate you are going, I don't think that will help much.

yeah fans may be failing or full of dust; I'd open it up and clean out any dust if you haven't already (sounds like you have done this though). CPU may also need some new paste. I've seen in the past were cheap or no paste has been applied for laptops; it's not always given the same quality as desktops depending on the OEM so worth checking.

 

edit: just re-read the OP and see the notebook is from 2014; it may just be reaching the end of its ropes then. Looking out for a replacement machine may not be a bad idea if cleaning and new paste haven't helped.

13 minutes ago, Brandon H said:

yeah fans may be failing or full of dust; I'd open it up and clean out any dust if you haven't already (sounds like you have done this though). CPU may also need some new paste. I've seen in the past were cheap or no paste has been applied for laptops; it's not always given the same quality as desktops depending on the OEM so worth checking.

 

edit: just re-read the OP and see the notebook is from 2014; it may just be reaching the end of its ropes then. Looking out for a replacement machine may not be a bad idea if cleaning and new paste haven't helped.

he is looking for a new one. Coupl;e threads down from here ;) 

 

19 hours ago, Tidosho said:

have you COMPLETELY removed the heatsink and cleaned both sides of heatsink fin matrix, especially the part of the heatsink that's facing the fan? They are often covered with a blanket of dust that simply blowing compressed air into the vents won't clear it.

8 hours ago, kiddingguy said:

I have not removed the heatsink, just the CPU and CPU and put new thermal paste on it. I thought removing and cleaning them is a little tricky...

If you haven't removed the fan from the heatsink, then I can say for near certainty that the issue is what Tidosho mentioned.

 

I have a 7-8 years old asus laptop and it too was recently running very hot and sounding like a jet engine, and even shutting itself down while doing something as trivial as watching a youtube video at high resolutions. I took it apart and dismantled the cooler and as Tidosho wrote, there was a thick blanket between the fan and the heatsink, blocking the airflow. I removed it and the overheating issue was gone. I didn't even bother with reapplying the thermal paste.

4 hours ago, eddman said:

If you haven't removed the fan from the heatsink, then I can say for near certainty that the issue is what Tidosho mentioned.

 

I have a 7-8 years old asus laptop and it too was recently running very hot and sounding like a jet engine, and even shutting itself down while doing something as trivial as watching a youtube video at high resolutions. I took it apart and dismantled the cooler and as Tidosho wrote, there was a thick blanket between the fan and the heatsink, blocking the airflow. I removed it and the overheating issue was gone. I didn't even bother with reapplying the thermal paste.

I have ordered a new fan. Let's see if that helps. Keep you all updated.

There was indeed a lot of dust between the fan and the exit of air. I cleaned it (also the GPU one).

I also replaced the fan with a new one.

 

Temps are (way) down. Let's see it this will be kept. Hopefully yes.

  • Like 2
3 hours ago, kiddingguy said:

I reinstalled Windows. Temps are now between 55-68 Celsius.

A little 'hotter' than earlier mentioned, but still quite OK I guess for machine 6 years old. Right?

Is that 55-68C on idle, or on load?

 

Try Prime95. See what it does on load. ;)

  • 11 months later...

This topic was automatically locked because it did not receive any replies for a year. If you want to have this topic reopened

  • please contact any staff moderator or
  • report the first post of the topic with the reason why it should be reopened.

Thank you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!