New Computer?


Recommended Posts

You're honestly probably lagging because your workstations have 4GB of RAM. That old pentium proc isn't doing you any favors either for Quickbooks. 10 years old though for a computer now, it's going to be more trouble than it's worth to upgrade components in them.

 

Get 8GB of RAM minimum for administrative clerical work. 16GB will hold you over for years. SSD are so cheap now, there's really no reason not to. 

 

3 hours ago, Brandon H said:

hey for as cheap as he managed to get that build I say why not :D

 

$570 isn't too bad a price at all for all that. gives good wiggle room with the extra power.

A good part of the 570$ is the GPU though and if he's not playing games he could get away with something cheaper than a 580. A 570 can often be found for 120$. Something cheaper could even do the job probably. I'm not knowledgeable about cheap office gpus but maybe a 1030 or even a 710 would do the job?

Edited by LaP
4 hours ago, Brandon H said:

yep, that looks to be the same SSD I linked from Amazon :)

 

and yes if the SSDs alone aren't enough to boost your current PCs to your liking the rest of the parts @Mockingbird listed should suit you well. Or we can recommend some pre-built machines if you'd prefer not to put it together yourself.

4GB is the bare minimum these days. I worked on a 4GB computer recently for a client and even for the most basic office work and internet browsing with couple of opened windows it was slow as hell at the end of the day. I would say for work 8GB RAM is getting close to a minimum.

20 hours ago, LaP said:

4GB is the bare minimum these days. I worked on a 4GB computer recently for a client and even for the most basic office work and internet browsing with couple of opened windows it was slow as hell at the end of the day. I would say for work 8GB RAM is getting close to a minimum.

At my work I have a laptop with windows 10 (Dell Latitude e5470) i5 with 4gb ram and it flies, thankfully it has a m.2 hard drive which I guess is what's keeping it snappy. In all honesty, an SSD these days makes office tasks much easier to deal with.

28 minutes ago, forster said:

At my work I have a laptop with windows 10 (Dell Latitude e5470) i5 with 4gb ram and it flies, thankfully it has a m.2 hard drive which I guess is what's keeping it snappy. In all honesty, an SSD these days makes office tasks much easier to deal with.

Wasn't going to add my 2 cents about SSD's but seeing as how last post here is about that, here it is. Just installed SSD's in all 4 of my laptops recently. Even on kids ancient Toshiba Satellite with lousy AMD dual core, it's almost like a new computer again. Did upgrade memory to it's max of 8GB's though, also. Wouldn't call it blazing, but a big time noticeable difference.

 

On my better laptops, it's blazing, in comparison to HDD's.

  • Like 2

Good evening! I purchased a few of the Samsung Evo 860 ssd and put them in the 2 computers, it's like night and day they are fine now with just this upgrade in my opinion.  Thanks for all the advice!

 

I have another computer question the list of parts above would they be more than enough to run AutoCad?

 

PCPartPicker Part List

CPU: *AMD Ryzen 5 2600 3.4 GHz 6-Core Processor  ($119.92 @ Amazon) 
Motherboard: *ASRock B450 Pro4 ATX AM4 Motherboard  ($89.99 @ Amazon) 
Memory: *G.Skill Aegis 16 GB (2 x 8 GB) DDR4-3000 Memory  ($62.99 @ Amazon) 
Storage: *Western Digital SN750 500 GB M.2-2280 NVME Solid State Drive  ($39.71 @ Amazon) 
Video Card: *ASRock Radeon RX 580 8 GB Phantom Gaming X Video Card  ($166.98 @ Newegg) 
Case: *Cougar MX330 ATX Mid Tower Case  ($44.00 @ B&H) 
Power Supply: *Corsair CXM 550 W 80+ Bronze Certified Semi-modular ATX Power Supply  ($49.99 @ Newegg) 
Total: $573.58

 

Thank you

  • Like 2
12 minutes ago, LilSnoop40 said:

Good evening! I purchased a few of the Samsung Evo 860 ssd and put them in the 2 computers, it's like night and day they are fine now with just this upgrade in my opinion.  Thanks for all the advice!

 

I have another computer question the list of parts above would they be more than enough to run AutoCad?

 

PCPartPicker Part List

CPU: *AMD Ryzen 5 2600 3.4 GHz 6-Core Processor  ($119.92 @ Amazon) 
Motherboard: *ASRock B450 Pro4 ATX AM4 Motherboard  ($89.99 @ Amazon) 
Memory: *G.Skill Aegis 16 GB (2 x 8 GB) DDR4-3000 Memory  ($62.99 @ Amazon) 
Storage: *Western Digital SN750 500 GB M.2-2280 NVME Solid State Drive  ($39.71 @ Amazon) 
Video Card: *ASRock Radeon RX 580 8 GB Phantom Gaming X Video Card  ($166.98 @ Newegg) 
Case: *Cougar MX330 ATX Mid Tower Case  ($44.00 @ B&H) 
Power Supply: *Corsair CXM 550 W 80+ Bronze Certified Semi-modular ATX Power Supply  ($49.99 @ Newegg) 
Total: $573.58

 

Thank you

Yes, it easily meets the system requirements

 

https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/System-requirements-for-AutoCAD-2020-including-Specialized-Toolsets.html

For AutoCAD? You need a better GFX card than a 580.... It's as good as a 1060....

 

And if you are running a GFX card higher than the 580, you need at least 600-750W..

18 minutes ago, Mockingbird said:

That's not what the system requirements said.

That's the minimum, dude. View any game, and you KNOW that the bare minimum won't cut it.

 

You ever run AutoCAD? Other than "what they say"?

47 minutes ago, LilSnoop40 said:

Good evening! I purchased a few of the Samsung Evo 860 ssd and put them in the 2 computers, it's like night and day they are fine now with just this upgrade in my opinion.  Thanks for all the advice!

 

I have another computer question the list of parts above would they be more than enough to run AutoCad?

 

PCPartPicker Part List

CPU: *AMD Ryzen 5 2600 3.4 GHz 6-Core Processor  ($119.92 @ Amazon) 
Motherboard: *ASRock B450 Pro4 ATX AM4 Motherboard  ($89.99 @ Amazon) 
Memory: *G.Skill Aegis 16 GB (2 x 8 GB) DDR4-3000 Memory  ($62.99 @ Amazon) 
Storage: *Western Digital SN750 500 GB M.2-2280 NVME Solid State Drive  ($39.71 @ Amazon) 
Video Card: *ASRock Radeon RX 580 8 GB Phantom Gaming X Video Card  ($166.98 @ Newegg) 
Case: *Cougar MX330 ATX Mid Tower Case  ($44.00 @ B&H) 
Power Supply: *Corsair CXM 550 W 80+ Bronze Certified Semi-modular ATX Power Supply  ($49.99 @ Newegg) 
Total: $573.58

 

Thank you

Depends ... what are doing with AutoCAD?  For fun or for money/business?  Basic 2D or Advanced 3D

 

If the latter ... you'll probably want to move from the RX580 to an AutoCAD certified GPU ... then figure out which card is within your budget.  

https://knowledge.autodesk.com/certified-graphics-hardware

 

If just strictly 2D ... GPU doesn't really matter.

 

What is the budget for this AutoCAD system and its intended usage case?

My wife's father has his own electrial contractor business and uses it everyday.  he is on version 2014 and said today he needs to do something it's taking a bit for the apps to load up etc.  if you could provide a part list for this that would be fine. i am going to try throwing in a new ssd hard drive like i just did on his other 2 machines and upgrade his memory to 8gb and see if it's better.

2 minutes ago, LilSnoop40 said:

My wife's father has his own electrial contractor business and uses it everyday.  he is on version 2014 and said today he needs to do something it's taking a bit for the apps to load up etc.  if you could provide a part list for this that would be fine. i am going to try throwing in a new ssd hard drive like i just did on his other 2 machines and upgrade his memory to 8gb and see if it's better.

Probably be best to find out what his specs are currently ... and how exactly he uses it.  The system you put together would probably be just fine if he is just doing 2D drafting (though the GPU is probably overkill). 

1 hour ago, Mindovermaster said:

That's the minimum, dude. View any game, and you KNOW that the bare minimum won't cut it.

 

You ever run AutoCAD? Other than "what they say"?

Did you just compared AutoCAD to a game?

 

54 minutes ago, Jim K said:

Depends ... what are doing with AutoCAD?  For fun or for money/business?  Basic 2D or Advanced 3D

 

If the latter ... you'll probably want to move from the RX580 to an AutoCAD certified GPU ... then figure out which card is within your budget.  

https://knowledge.autodesk.com/certified-graphics-hardware

 

If just strictly 2D ... GPU doesn't really matter.

 

What is the budget for this AutoCAD system and its intended usage case?

Workstations cards are so expensive.

 

Unless the OP has specific need for a workstation card, there is no need to spend a lot of money for one.

Edited by Mockingbird
4 minutes ago, Mockingbird said:

Did you just compared AutoCAD to a game?

 

No, I was comparing "minimal system requirements" for ANY program. NOT just games.

 

6 minutes ago, Mockingbird said:

Do you realize that workstation cards have drivers that are completely different from consumer cards?

 

When did workstation cards ever come into count here? Aside from that, consumer vs workstatiuon graphics have the same type of drivers. Workstation drives just have more umph.

 

9 minutes ago, Mockingbird said:

Unless the OP has specific need for a workstation card, there is no need to spend a lot of money for one, there is no need to spend a lot of money for one.

And in the beginning he said $1k for EACH. So we have a lot of wiggle room here.

 

BUT, OP, what type of AutoCAD work are you doing? (going to...)

3 minutes ago, Mockingbird said:

Which video card do you think he should get and why?

IDK about the latest cards, and I'm not pretending to be all-knowing. I own a 580 myself, but aside from that, it is very close, as in preformance to the GFX 1060. Again, I haven't used AutoCad since the early 2000s either, BUT that 580 sounds like a bad price to me.

 

BTW, umm, the 580 isn't a workstation card, you know...

7 minutes ago, Mindovermaster said:

IDK about the latest cards, and I'm not pretending to be all-knowing. I own a 580 myself, but aside from that, it is very close, as in preformance to the GFX 1060. Again, I haven't used AutoCad since the early 2000s either, BUT that 580 sounds like a bad price to me.

...and why is that relevant?

 

7 minutes ago, Mindovermaster said:

BTW, umm, the 580 isn't a workstation card, you know...

Yes, I do know that.

 

What's your point?

46 minutes ago, Mockingbird said:

Workstations cards are so expensive.

 

Unless the OP has specific need for a workstation card, there is no need to spend a lot of money for one.

Which I pointed out. i.e. what is the usage of AutoCAD, budget, etc...which isn't entirely clear.  If just using for 2D designs ... the RX580 is overkill.  If doing advanced 3D modeling, an AutoCAD certified (workstation) GPU would probably be beneficial.  However, not enough is known about how this system is used, budget, etc.

 

Anyway, I'm not going to get involved in this little back and forth.  It is tiring.

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • XnConvert 1.112 by Razvan Serea  XnConvert is a cross-platform batch image-converter and resizer with a powerful and ease of use experience. All common picture and graphics formats are supported (i.e. JPG, PNG, TIFF, GIF, Camera RAW, JPEG2000, WebP, OpenEXR) as well as supporting over 500 other image formats. Also available within the batch operations include rotating, adding of watermarks, adding of text along with many image-adjustment features such as brightness, shadows and more. Among the features included are: Batch adding of files and folders Support for drag and drop of files Batch rotating, cropping, resizing and more Adding of photo masks Preserving or removing image metadata in conversions Multipage image file support (i.e animated GIF, APNG, TIFF) Command line integration via NConvert Filters - such as 'Blur', 'Gaussian Blur', 'Emboss', "Sharpen' and much more Effects - such as 'Old camera' and much more Download: XnConvert 64-bit | Standalone | ~30.0 MB (Freeware) Download: XnConvert 32-bit | Standalone Links: XnConvert Website | Screenshot | Release Announcement Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft updates Visual Studio Code with chat cost tracking and multi-agent chats by Paul Hill Microsoft has just launched Visual Studio Code 1.126, its latest weekly release. This time, the company has focused on letting you see the total cost of chat sessions to spot expensive conversations; enabling multiple chats per session that run side-by-side in one agent host Copilot session; and letting you browse new folders safely in restricted mode. We have now reached the stage where free AI in IDEs is coming to an end. To help you keep track of your costs, VS Code now lets you see the entire cost of a chat session, rather than just individual turns. This should give you more transparency about which sessions consume the most credits, so you can better manage your usage over time and spend less. For those of you using the Agents window, you know it is possible to run and manage multiple agent sessions at once. In this update, a Copilot session started from an agent host can hold several chats at once. Explaining how this feature works, Microsoft writes: Finally, from this update forward, Microsoft will remove the pop-up when opening an untrusted folder. When you open a new folder now, it will automatically open in Restricted Mode. You will see a banner that lets you manage the trust level of the folder. Microsoft has made this change so that it’s easier to start inspecting code without giving it trust right away. If you have VS Code, you can check for updates within the app now to get this new version. Otherwise, you can download it from the Visual Studio Code website.
    • Anthropic accuses Alibaba of using 25,000 fake accounts to copy Claude's capabilities by Karthik Mudaliar Anthropic has accused Alibaba of using nearly 25,000 fraudulent accounts to extract capabilities from Claude on a huge scale. According to a report from Reuters, Anthropic told US lawmakers that operators linked to Alibaba and the company’s Qwen AI team generated 28.8 million exchanges with Claude between April 22 and June 5, 2026. That is a lot of Claude conversations, but Anthropic says this was not ordinary chatbot use. The company believes the accounts were part of a coordinated effort to collect answers that could help train or improve rival AI systems. The alleged campaign reportedly focused on some of Claude’s most valuable skills, including software development, multi-step reasoning, and agentic tasks. In practical terms, that means getting an AI model to plan and complete work across several stages rather than simply answering a single question. This is called 'distillation,' where AI companies use outputs from a larger model to train a smaller and cheaper one. The smaller model learns to imitate useful parts of the more capable system without needing the same amount of computing power. The distillation process isn't automatically suspicious, but the problem comes when one company gathers another provider's outputs without permission and at an industrial scale. Also, this does not mean Alibaba obtained Claude’s source code, model weights, or original training data. Instead, Anthropic claims the accounts repeatedly asked Claude carefully designed questions and collected the answers. Those answers could then be used as training material for another model. Anthropic has made similar accusations against DeepSeek, Moonshot AI, and MiniMax earlier this year. As Neowin previously reported, Anthropic said those three companies collectively generated more than 16 million Claude exchanges through roughly 24,000 accounts. Anthropic says the new campaign produced almost twice as many exchanges in a matter of weeks. Anthropic reportedly told lawmakers that the campaign could help Chinese AI developers approach the capabilities of its Mythos Preview model. Mythos is focused on advanced cybersecurity work, including finding and exploiting complex software vulnerabilities. via Reuters | Photo via DepositPhotos.com
    • An Indian manufacturer that assembles roughly one-third of Apple's iPhones and supplies semiconductor components to Tesla confirmed Monday that attackers had stolen and publicly published a 630-gigabyte cache of confidential files — including engineering blueprints stamped "TRADE SECRET," a 52-page quality inspection document for iPhone circuit board components, and cryptographic certificates that security experts say could be weaponized in follow-on attacks. https://www.techtimes.com/articles/319019/20260624/apple-tesla-supplier-tata-electronics-confirms-630-gb-data-theft-iphone-specs-dark-web.htm
  • Recent Achievements

    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      176
    3. 3
      PsYcHoKiLLa
      133
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!