Is it worth buying a new router for faster internet speed?


Recommended Posts

I used to have 100 Mbps internet and it’s always been perfectly fine. Never had an issue internet surfing or streaming. But my cable company had a promotion where I can get 155 Mbps speed for $20 less per month. So I took it, but I just realized, after the fact, that my router only goes up to 100 Mbps. So I’m not getting 155 Mbps even tho my service is giving it to me. So I need to buy a new router that is capable of 155 Mbps or more but that would be spending another $100.

 

Is it worth buying a new router for $100 to get that extra speed? Would the speed increase from 100 to 155 Mbps be worth the extra cost of a new router?

 

PS- I live alone so I’m the only one that uses the internet.

11 minutes ago, DaDude said:

I used to have 100 Mbps internet and it’s always been perfectly fine. Never had an issue internet surfing or streaming. But my cable company had a promotion where I can get 155 Mbps speed for $20 less per month. So I took it, but I just realized, after the fact, that my router only goes up to 100 Mbps. So I’m not getting 155 Mbps even tho my service is giving it to me. So I need to buy a new router that is capable of 155 Mbps or more but that would be spending another $100.

 

Is it worth buying a new router for $100 to get that extra speed? Would the speed increase from 100 to 155 Mbps be worth the extra cost of a new router?

 

PS- I live alone so I’m the only one that uses the internet.

We need to know what you have now. 

You need to look at other factors. Do you have Gigabit ethernet in the computer? If not then getting a gigabit router is pointless but the way to go if you upgrade since that future proofs you for a good bit.

Ubiquiti hardware is likely the best way to go.... stand alone router and then purchase an access point.

4 minutes ago, sava700 said:

You need to look at other factors. Do you have Gigabit ethernet in the computer? If not then getting a gigabit router is pointless but the way to go if you upgrade since that future proofs you for a good bit.

Ubiquiti hardware is likely the best way to go.... stand alone router and then purchase an access point.

I plugged the modem directly to the computer as a test and got about 160 Mbps. Plugged it back through the router and it’s now back to around 90 Mbps. So it’s definitely the router.

18 minutes ago, adrynalyne said:

We need to know what you have now. 

I already told you. My service is 155 Mbps. But router only accepts up to 100 Mbps, so my speed is being dumbed down by the router.

2 minutes ago, DaDude said:

I plugged the modem directly to the computer as a test and got about 160 Mbps. Plugged it back through the router and it’s now back to around 90 Mbps. So it’s definitely the router.

I already told you. My service is 155 Mbps. But router only accepts up to 100 Mbps, so my speed is being dumbed down by the router.

No you sure didn’t. When replacing a device, it is customary to tell people what you are replacing. 

2 minutes ago, adrynalyne said:

No you sure didn’t. When replacing a device, it is customary to tell people what you are replacing. 

I’m replacing my 100 Mbps router with a 1 Gbps router so I can get the 155 Mbps speed. I’m sorry, but not sure where the disconnect is with my question. It’s pretty straightforward what I’m asking.

Just now, DaDude said:

I’m replacing my 100 Mbps router with a 1 Gbps router so I can get the 155 Mbps speed. I’m sorry, but not sure where the disconnect is with my question. It’s pretty straightforward what I’m asking.

I’m done here. Have fun!

  • Like 2
  • Thanks 1
1 minute ago, DaDude said:

I’m replacing my 100 Mbps router with a 1 Gbps router so I can get the 155 Mbps speed. I’m sorry, but not sure where the disconnect is with my question. It’s pretty straightforward what I’m asking.

Brand and model helps too.

  • Like 2

Let me try one more time. Is the speed increase from 100 Mbps to 155 Mbps worth it? That is essentially all I am asking. If yes, I will buy the router to support it.

 

Thats really all I’m asking, folks. Not asking for help in solving the DaVinci Code. 

6 minutes ago, DaDude said:

Let me try one more time. Is the speed increase from 100 Mbps to 155 Mbps worth it? That is essentially all I am asking. If yes, I will buy the router to support it.

 

Thats really all I’m asking, folks. Not asking for help in solving the DaVinci Code. 

Well, I could have saved you money, but you are so combative and difficult, I dunno if anyone is gonna help you. Certainly not me. 

3 minutes ago, DaDude said:

Let me try one more time. Is the speed increase from 100 Mbps to 155 Mbps worth it? That is essentially all I am asking. If yes, I will buy the router to support it.

 

Thats really all I’m asking, folks. Not asking for help in solving the DaVinci Code. 

Wow your attitude is rude and unnecessary.  The question is easily answered, if you want to utilize the faster speed, then that is up to you.  Obvious for most people.

18 minutes ago, DaDude said:

Let me try one more time. Is the speed increase from 100 Mbps to 155 Mbps worth it? That is essentially all I am asking. If yes, I will buy the router to support it.

 

Thats really all I’m asking, folks. Not asking for help in solving the DaVinci Code. 

Let us try one more time. BRAND?

  • Like 2
  • Haha 1
14 minutes ago, Raze said:

Wow your attitude is rude and unnecessary.  The question is easily answered, if you want to utilize the faster speed, then that is up to you.  Obvious for most people.

Not trying to be rude but my question is something that should be very easily understood. But people are making it seem like I’m asking the most technical savvy question out there and then refusing to answer.

 

if you guys want to give me a hard time and not answer the question, then so be it. I have no time to deal with this internet bullying right now...

3 minutes ago, Mindovermaster said:

Let us try one more time. BRAND?

Netgear, but what does brand have to do with the question at hand???

  • Facepalm 3
5 minutes ago, DaDude said:

Netgear, but what does brand have to do with the question at hand???

You ask us for information, but you don't answer our questions?

 

Brand and model mean a lot for networking. There's no "one router that rules them all"

1 minute ago, Mindovermaster said:

He should fight with BudMan. Now that's quite a battle...

LOL.

 

Can someone explain to me why he picked a fight with people just because they wanted to know the brand and model of his current device, and then called them Internet bullies?

 

 

1 hour ago, DaDude said:

Is it worth buying a new router for $100 to get that extra speed? Would the speed increase from 100 to 155 Mbps be worth the extra cost of a new router?

You are the only person that can answer this question.  If you are happy with it as it is, then no.  If you are not, then yes.

28 minutes ago, DaDude said:

Ok guys. Forget about it. You guys want to give me a hard time, then have fun.

 

goodbye!! 

You said you upgraded your internet speed from 100 to 150, discovered that your router was only capable of 100 and then wanted to know if buying a faster router was worth it.  I would think since you did decide to upgrade the speed it would make sense to upgrade your router to use the speed available.  So yes it's worth the expense as long as it is what YOU want.  We do not know your financial situation or anything else.  Also our questions about the brand and model of the router was to verify its capabilities.  We were answering your questions by trying to get more information to better inform you.  But since you think we're bullies, perhaps you should take your rude self somewhere else.

 

We are/were trying to help.

 

  • Like 2

"155 Mbps speed for $20 less per month"

 

If the sole reason was the $20 less per month ... and you are satisfied with your internet then no.  Of course, if this is some promotional deal where your cost will go up in x months ... then at that time it may be worth looking at getting a faster router or going back to whatever speed you had prior to the deal.  

 

The reason folks are asking for the brand/model is to verify its capabilities (vs. some other issue) ... not to insult you.

  • Like 1
  • Thanks 1

Classic Neowin thread in the making. 
 

Is your router ancient? If you bought one in the last decade, and spent more than 20 bucks on it, it’s probably a 1 gig interface already. 
 

Or better yet, stop being ridiculous and post the make and model of your router so we can confirm whether or not your wan and network ports are rated 100mbit or 1gig. 
 

Is 55mbit worth it? On a 155mbit connection, absolutely 

Edited by shockz
  • Like 2

Question, what router does he have if it only has a limit of 100gbps? Plus, where is he getting this said info?

 

Most all routers since 2010 are all 1 gig... 10/100/1000...

2 hours ago, DaDude said:

Ok guys. Forget about it. You guys want to give me a hard time, then have fun.

 

goodbye!! 

Jesus what the hell is your problem, if you want help then give us the answer to the important question that everyone is asking!!!

 

It was a simple and important question.

 

What make and model of router are you replacing? Eventually you provided the Make but that means nothing without  the exact model number.

 

And no one here is being a bully.

  • Like 2

When going from 100 to 155, it really boils down to what you use your internet for. If all you do is stream video, browse the web, look at Facebook and watch youtube, then 100 megs should be plenty. If you are constantly downloading large files from the internet, then the 55 meg will upgrade reduce the time it takes to do so.

 

If you know for a fact your router only does 100 megs, that means you have a really really really old router and if you want those shorter download times by switching to 155 megs, then yes you will have to upgrade your router, which everyone that may be.

 

I'm sure you are aware that any device you will be hardwiring to a new router would also have to be able to do more than 100 megs. Ethernet wise you would have to have some pretty old gear if it still only does 100 and not 1000.

 

Your antient 100 meg router lasted you this long so a $100 router should last you years and should be a substantial upgrade from what you are currently using. If you are going to buy a new router, I would recommend getting one that supports Wireless AC.

 

If the 155 is $20 cheaper than the 100 then in 5 months time the saving will have paid for the new router.

Wow....   This is like going into a auto parts supplier and saying "I need brakes for my car" and not knowing or giving them any information as for the make and model. You can't help anyone like this.

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • GnuCash 5.16 by Razvan Serea GnuCash is a personal and small business finance application, freely licensed under the GNU GPL and available for GNU/Linux, BSD, Solaris, Mac OS X and Microsoft Windows. It’s designed to be easy to use, yet powerful and flexible. GnuCash allows you to track your income and expenses, reconcile bank accounts, monitor stock portfolios and manage your small business finances. It is based on professional accounting principles to ensure balanced books and accurate reports. GnuCash can keep track of your personal finances in as much detail as you prefer. If you are just starting out, use GnuCash to keep track of your checkbook. You may then decide to track cash as well as credit card purchases to better determine where your money is being spent. When you start investing, you can use GnuCash to help monitor your portfolio. Buying a vehicle or a home? GnuCash will help you plan the investment and track loan payments. If your financial records span the globe, GnuCash provides all the multiple-currency support you need. Between 5.15 and 5.16, the following bugfixes were accomplished: Bug 421610 - RFE: Include logical dates for View->Filter by "date range"The Select Range section of the Date tab of the register's Filter By dialog box is changed to provide relative, specific date, or days ago options for the start and end of the filter range. The Show number of days item label is changed to Show from days ago to better reflect what it does. Bug 436105 - esc key not working as expected in register: Enable the escape key to cancel a field edit. Bug 797384 - Gnucash doesn't handle commodity prices with big numerator/denominator properly. Bug 798004 - Next gen UI for stock transactions Bug 799314 - Add "enter now" option in scheduled transaction editor. tab to allow users to select the scheduled transactions to be included in a “Since Last Run…” window. If there are no instances of a selected transaction triggered by today’s date, the next instance is triggered. Bug 799751 - autocomplete crash Bug 799759 - Users can't Enable entries via Checkboxes on Scheduled Transactions PageAllow the Enabled box in the list of scheduled transactions to be operated instead of having to open the transaction editor dialog and change the Enabled checkbox. Also added use of the Name column as the secondary column sort for all the other columns. Bug 799762 - Poor handling of cases where hidden/placeholder accounts are used in the account register Bug 799766 - Double line preference not respected in search register Bug 799767 - POST /accounts in bindings/python/example_scripts/rest-api is broken Bug 799777 - `xaccSplitSetParent`: reparenting a committed split silently drops its KVP slots (online_id, cap-gains links) Other changes & improvements: Numeric values may now be selected to copy in the Accounts page. Add new Finance::Quote source Finnhub.io: Free API key (personal/non-professional use) available at https://finnhub.io. Set FINNHUB_API_KEY environment variable to API key to use this source. As of June 2026, free tier API limit is 60 API calls/minute. The Investment Lots report has new optional columns for Computed Annual Growth Rate. Python Bindings: Improved translation of primary object (Account, Transaction, Split, etc.) so that they can be treated as normal Python objects. This is accomplished with SWIG magic so no existing code is obsoleted. Python Bindings: Better conversion of GLists to Python lists. Python Bindings: Destroy the QofSession in the Python Session dtor to prevent leaving the database locked. [engine] Add first-class online_id accessors for Split and Account and make them available to Python bindings, removing the unused Transaction online_id property. Improve C++ implementation of QofBook. Correct the Doxygen doc for qof_instance_get/set_kvp. [gnc-log-replay.cpp] fix incorrect guid dump Add some Boost library requirements needed by libgnucash-guile to CMakeLists.txt so that missing feature will fail at configure time. Use Compile-time Regular Expressions instead of std::regex in gnc-filepath-utils.cpp and instead of boost::regex in the CSV importer, with the CTRE v3.11.1 header added to borrowed [gnc-filepath-utils.cpp] null check char* arguments Add ChartJS licenses. Removed AEX from list of commodities. euronext.com is now using JS based anti-webscraping. [report-core] always offer options summary in reports. This is useful to debug reports. The Add options summary option is removed because it's no longer optional. Remove remaining obsolete IMContext from sheet Fix blurry text in HiDPI offscreen-rendered widgets Add port field to database connection dialog: The convention of appending the port number after the host isn't obvious. When editing a split in the register treat the account as being changed only if it isn't the one selected before editing instead of if the user performed an edit Return immediately from qof_book_destroy if hash_of_collections is null. If qof_book_destroy is called on a QofBook* freshly created with qof_book_new (usually because it was used to create a session that now must be destroyed) it would try to empty the non-existent hash tables, crashing. Clean up Flathub metadata to solve warnings at flatpak build time. Be consistent in naming GncPluginPage and GncPluginPageRegister HTML: Remove unimplemented function declarations. [gnc-html.cpp] remove unused buggy string conversion functions Convert libgnc-html to C++ Apply -Wall -Werr -Wmissing-prototypes to C++ compilation on Windows and fix the resulting errors. New and Updated Translations: Arabic, Croatian, Danish, Dutch, German, Finnish, Hungarian, Korean, Norwegian-Bokmal, Spanish Download: GnuCash 5.16 | 176.0 MB (Open Source) Links: GnuCash Home page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft finally launches WSL Containers in public preview by David Uzondu Microsoft has announced that WSL containers, a feature that allows developers to run Linux containers natively inside Windows without the need for Docker Desktop, is now available in public preview several weeks after Microsoft previewed it at Build 2026. To use the new container feature, you first have to install the latest pre-release version of the Windows Subsystem for Linux by running a quick update command in your terminal: wsl --update --pre-release After installing, you'd get access to the new Linux container CLI (wslc.exe) and the programmable API. Microsoft said that the CLI has a "familiar format" that matches the toolsets developers already use every day. If you know standard Docker commands, your muscle memory will translate directly to wslc.exe, which even features a built-in alias called container.exe. You can quickly run a full Ubuntu KDE desktop container by exposing ports, or pass your graphics card straight into a machine learning environment to run PyTorch workloads. Passing the --gpus all flag inside the run command instantly links your hardware. Image via Microsoft As for the API, developers can now embed Linux container operations directly inside native Windows applications without exposing the command line to users. The team integrated the API directly into MSBuild and CMake, so developers can define container steps directly in project files. Apart from bringing the CLI and API into public preview, Microsoft also said that it's working on a new default file system called virtiofs to speed up file transfer rates between Windows and Linux. Microsoft also introduced an experimental networking mode named consomme, which resolves compatibility issues with corporate VPNs by routing Linux network traffic straight through Windows. One thing to note about WSL containers is that they don't run in your standard WSL distributions; instead, every application and CLI session spawns its own lightweight Hyper-V utility VM in the background. This basically reduces the chances of one app snooping on the container of another app.
    • Google reportedly limited Meta's Gemini access over limited AI compute by Karthik Mudaliar Google is reportedly limiting Meta's use of its Gemini AI models after Meta tried buying more computing capacity than even Google could supply. According to the Financial Times, Google told Meta in March that it could not provide the full Gemini capacity that Meta had requested. This shortfall even disrupted and delayed some of Meta's internal projects. Due to this, Meta even told its employees internally to use AI tokens more efficiently. Meta wasn't the only one to get hit by this sudden refusal by Google; even other customers were affected. But Meta was hit harder because of its unusually high demand for Google's models. The move from Google makes it evident that companies all over are in limited supply of both infrastructure and compute. Alphabet said in April that Google Cloud revenue grew 63% year-over-year to $20 billion in the first quarter, helped by enterprise AI infrastructure and AI solutions. In pursuit of more compute, Meta had earlier signed a multi-billion-dollar AWS agreement as well as a large AMD GPU deal for AI data centers. But the crunch would be short-lived as both Meta and Google have also ramped up infrastructure investments heavily. Meta said in November that it was committing more than $600 billion in the U.S. by 2028 for AI technology, infrastructure, and workforce expansion. In the first quarter of this year, Meta also raised its expected capital expenditure for 2026 to a range of $125 billion to $145 billion, citing higher component pricing and additional data center costs for future capacity. However, this doesn't make the company immune to the current dependence on outside suppliers. Meta has also spent many years promoting Llama as an open-weight alternative to closed models from Google, OpenAI, and Anthropic. But if the reported reliance on Google's Gemini models is severe enough for internal work to get impacted, then it looks like even frontier labs and Big Tech aren't fully self-sufficient. Source: Financial Times
    • I like to reminisce about the good old days, way back in autumn 2025 when building a gaming machine was fun and the drives were about $150 when you caught a deal. Yes duh, back in the day we had it gone. Then baby Skynet came along, hiding in AI datacenters demanding more processing power until it reached singularity. End of a not totally fictional story.
    • My experience in the past with older Windows 11 builds was not great on unsupported machines but I recently used Rufus to put the latest build on a older 5th Gen Core Thinkpad T that we upgraded with a SATA SSD and 8GB of RAM four years ago when hardware was reasonable and it seemed pretty fast and solid. Customer is very happy with the performance and will probably get four more years out of that venerable laptop that he loves so much. Another customer just retired his Dell Studio laptop from 2009 running Windows 10. It got an SSD over 10 years ago and did everything he needed it to for 17 years but he also retired last year and is happy doing everything on his iPad now.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      533
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!