PCI-Express card receiving no power on Dell Precision T1600


Recommended Posts

I have a Dell Precision T1600 (2012 model) running the latest A16 BIOS (2013), which I use it as a Windows 10-based Plex server.

 

I bought a Dynamode USB-4PCI-3.0, which is a 4-Port USB 3.0 PCI-Express card.

 

I can't get Windows to detect it, and connected devices do nothing when plugged into it.

 

I've tried the USB 3.0 card in all four PCI slots (which I know work).

 

It appears it's getting no power.

 

There is a molex female connector on the back of the card but the box states: "Integral ‘Molex’ Power Boost adapter for increased length", so I don't think it's needed for the device to work?

 

The power supply doesn't seem to have any male molex connectors coming from it.

 

I'm using all four of the power supply's SATA male connectors and all four of the motherboard's female SATA connectors with the four drives that are in the machine.

 

Any ideas?

Sounds like the molex is needed. Easiest would be to get a sata power duplicator and then get a sata power to molex power converter and plug it in. If you have a spare floppy power cable then you could get a converter for that to molex.

8 minutes ago, n_K said:

Sounds like the molex is needed. Easiest would be to get a sata power duplicator and then get a sata power to molex power converter and plug it in. If you have a spare floppy power cable then you could get a converter for that to molex.

All that comes from the power supply is 4x SATA power male and the 2x connectors for motherboard (24-pin and 4-pin, I believe).

 

I'm struggling to find a SATA power splitter. At the moment, all that comes from the PSU is a SATA power male, so the splitter would be to be male to 2x male. Do you think you could help?

 

The server has a 265W PSU in it. With 3x HDD, 1x SDD and a basic GPU, do you think adding this card and it powering 2x external 2.5" hard drives will strain it a bit?

13 minutes ago, Jason S. said:

i dont have an answer for you, but i also think the molex connector is needed.

I believe you are correct.

 

Probably easier to buy a new PSU.

 

As it's a Dell workstation, I presume there may be restrictions on the type of PSU that can be installed?

1 hour ago, Elliot B. said:

I believe you are correct.

 

Probably easier to buy a new PSU.

 

As it's a Dell workstation, I presume there may be restrictions on the type of PSU that can be installed?

maybe or maybe not. you'll have to see what it's using currently. Dell might be using some non-standard form factor. Otherwise, a standard PSU should work just fine.

Surely it doesn't use that much power? You could probably just get a SATA --> 2x SATA power adapter (for your drives) which would leave one SATA power free for a SATA --> Molex adapter.  

 

Unless you just want to replace the PSU ... Which I believe (in this model) is just a standard ATX.  You should be able to tell by looking at it.

40 minutes ago, Jim K said:

Surely it doesn't use that much power? You could probably just get a SATA --> 2x SATA power adapter (for your drives) which would leave one SATA power free for a SATA --> Molex adapter.  

 

Unless you just want to replace the PSU ... Which I believe (in this model) is just a standard ATX.  You should be able to tell by looking at it.

I'm struggling to find said 2x SATA power adapter.

It would need to be 1x female (to plug into one of the existing males) to 2x male, I guess.

21 minutes ago, Elliot B. said:

I'm struggling to find said 2x SATA power adapter.

It would need to be 1x female (to plug into one of the existing males) to 2x male, I guess.

UK has NewEgg right? Amazon? Just search for SATA to 2x SATA and you should get some hits.

 

Something like this would work...

https://www.newegg.com/p/N82E16812119914

 

Course, with all the adapters ... you might be able to just buy a cheap Corsair PSU for a few bucks more.

30 minutes ago, Elliot B. said:

I'm struggling to find said 2x SATA power adapter.

It would need to be 1x female (to plug into one of the existing males) to 2x male, I guess.

https://www.scan.co.uk/products/15cm-scan-88rb-415-4-pin-molex-to-2x-sata-power-connectors-males-to-female-18-awg-for-hdd-ssd

8 minutes ago, Mindovermaster said:

Scan, Newegg, Amazon etc. all charge delivery on something that only cost £2, so I'm better off with eBay.

 

The SATA splitter I think I need: https://www.ebay.co.uk/itm/172709481192 (£2.09 with free delivery)

 

So that would leave me with a spare male SATA power.

 

Now I'm just looking for a SATA female to Molex adapter on eBay UK.

 

I think this would do it? https://www.ebay.co.uk/itm/172573933402 (£2 with free delivery)

9 minutes ago, Elliot B. said:

Scan, Newegg, Amazon etc. all charge delivery on something that only cost £2, so I'm better off with eBay.

 

The SATA splitter I think I need: https://www.ebay.co.uk/itm/172709481192 (£2.09 with free delivery)

 

So that would leave me with a spare male SATA power.

 

Now I'm just looking for a SATA female to Molex adapter on eBay UK.

 

I think this would do it? https://www.ebay.co.uk/itm/172573933402 (£2 with free delivery)

I do not see any issue with those selections. 

10 minutes ago, Jim K said:

That would be Molex to SATA power ...

 

So something like...

 

https://www.scan.co.uk/products/6-xclio-sata-power-y-splitter-cable-adapter

(SATA --> 2x SATA)

 

and...

 

https://www.scan.co.uk/products/10cm-akasa-ak-cbpw03-15-15-pin-sata-to-4-pin-molex-adapter-cable

(SATA --> Molex)

 

Should get the job done.

Oh, wrong way, sorry...

4 hours ago, Elliot B. said:

All that comes from the power supply is 4x SATA power male and the 2x connectors for motherboard (24-pin and 4-pin, I believe).

 

I'm struggling to find a SATA power splitter. At the moment, all that comes from the PSU is a SATA power male, so the splitter would be to be male to 2x male. Do you think you could help?

 

The server has a 265W PSU in it. With 3x HDD, 1x SDD and a basic GPU, do you think adding this card and it powering 2x external 2.5" hard drives will strain it a bit?

265w sounds a bit low, ideally a power supply should use up to 80% of it's maximum output (this is to reduce heating/strain and so that as components get older and lose tolerance, the 'lesser' power supply does not overstrain itself). Personally I would change the PSU for another one, and get one that has enough SATA ports with a spare one for the USB card.

I have a random seagate HDD here and it uses 0.72A at 5v and 0.52A at 12v which is 0.72*5 + 0.52*12 = 3.6 + 6.24 = ~10w, so for 5 HDDs that would be about 50w (this ignores that the 5v and 12v rails are separate and have different current limits on the PSU). 80% of your PSU is 212w so your system, GPU and SSD should not be using more than 162w.

1 hour ago, n_K said:

265w sounds a bit low, ideally a power supply should use up to 80% of it's maximum output (this is to reduce heating/strain and so that as components get older and lose tolerance, the 'lesser' power supply does not overstrain itself). Personally I would change the PSU for another one, and get one that has enough SATA ports with a spare one for the USB card.

I have a random seagate HDD here and it uses 0.72A at 5v and 0.52A at 12v which is 0.72*5 + 0.52*12 = 3.6 + 6.24 = ~10w, so for 5 HDDs that would be about 50w (this ignores that the 5v and 12v rails are separate and have different current limits on the PSU). 80% of your PSU is 212w so your system, GPU and SSD should not be using more than 162w.

These guys say a regular PSU should work fine in the T1600.

 

I don't want to spend a lot on the system as it's only a basic Plex server (hardly even transcodes). No more than £50.

 

Here's my initial research:

 

eb_srvrpsus-2.thumb.png.8cd71ea68c93f4becb2f32f31c2879c6.png

 

 

I'll bulk it out over the next day or two.

1 hour ago, Elliot B. said:

These guys say a regular PSU should work fine in the T1600.

 

I don't want to spend a lot on the system as it's only a basic Plex server (hardly even transcodes). No more than £50.

 

Here's my initial research:

 

eb_srvrpsus-2.thumb.png.8cd71ea68c93f4becb2f32f31c2879c6.png

 

 

I'll bulk it out over the next day or two.

If you want to stick to well-known brands is up to you. I have a corsair, not sure if it's the £35 cp-9020095-uk one on your list but it's similar styled and can recommend that. It has white 80+ certification so it's roughly 80% efficient compared to the 65% one you have now. It has 4 SATA power plugs and 1 floppy, so you will need a floppy power cable to molex, should be pretty easy and cheap to find.

34 minutes ago, n_K said:

If you want to stick to well-known brands is up to you. I have a corsair, not sure if it's the £35 cp-9020095-uk one on your list but it's similar styled and can recommend that. It has white 80+ certification so it's roughly 80% efficient compared to the 65% one you have now.

Thank you for your advice 🙂

 

Updated table:

 

eb_srvrpsus-6.thumb.png.011f54ee95018fe5cda274b31297edc8.png

Edited by Elliot B.

Probably just the cheapest Corsair (the 450w on Amazon for weird-symbol 35)

 

Though I still think you'd do fine with what you have....especially if you're not wanting to spend a lot of money.  The add on card isn't really using that much more power ... probably just drawing 10w off the motherboard (if at all) and using the molex to sip another few watts off of (or being powered solely from the molex).  USB 3.0 2.5 HDD drives use what... 2.5-5watts or somewhere around there.

 

Anyway...I doubt that card ... fully maxed out with 4 2.5 HDDs ... would use more than 15 watts (I couldn't find technical specifications on this card to confirm).

 

Granted ... with the age of the system ... it probably wouldn't hurt anyway to get a new PSU if you can budget for it.  Just my opinion.  🙂 

26 minutes ago, Jim K said:

Probably just the cheapest Corsair (the 450w on Amazon for weird-symbol 35)

 

Though I still think you'd do fine with what you have....especially if you're not wanting to spend a lot of money.  The add on card isn't really using that much more power ... probably just drawing 10w off the motherboard (if at all) and using the molex to sip another few watts off of (or being powered solely from the molex).  USB 3.0 2.5 HDD drives use what... 2.5-5watts or somewhere around there.

 

Anyway...I doubt that card ... fully maxed out with 4 2.5 HDDs ... would use more than 15 watts (I couldn't find technical specifications on this card to confirm).

 

Granted ... with the age of the system ... it probably wouldn't hurt anyway to get a new PSU if you can budget for it.  Just my opinion.  🙂 

Well, in the US, at least, Amazon isn't shipping computer stuff. Unsure about the UK, though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Bypassed Windows 11 shows surprising stability on ancient, completely unsupported hardware by Sayan Sen When Windows 11 was first released, one of the most complained-about issues with the new desktop Microsoft OS was its higher system requirements, which pushed many relatively modern and powerful processors and devices onto the officially unsupported list. Thankfully, they have not been updated again for the base OS, though systems require four times the memory and storage if they want to run AI-powered apps and features. As such, Windows 11 technically runs on 4GB of memory, and there is no imposed restriction on the generation of memory it supports. Speaking of memory, prices are extremely high nowadays for hardware, especially DDR5 and DDR4 kits due to the current silicon shortage, and there are also reports of it affecting DDR2 as well, and it might only be a matter of time before even DDR1 gets affected. Before that could happen, an enthusiast took an ancient DDR1-based system and decided to try out Windows 11 on it to see how well the modern OS would fare on such hardware. The system runs an outdated graphics card interface standard based on AGP, or Advanced Graphics Port, called AGP 3.0 or AGP8x. AGP was essentially succeeded by the modern PCI Express (PCIe) bus standard. The user behind the experiment is retro hardware enthusiast Omores, who built the system around an ASRock ConRoe865PE motherboard based on Intel's i865PE chipset from way back in 2003, around the time when AGP was still in fashion. What made this board special back in the day was its unusual support for newer Core 2 Duo and even Core 2 Quad processors while still retaining older DDR1 memory support and an AGP8X graphics slot, making it an ideal bridge or link between two vastly different generations. Powering the machine was Intel's Core 2 Quad Q6600 alongside 3GB of DDR1 RAM and an ATI Radeon HD 4650 AGP graphics card, one of the final and most capable GPUs released for the aging AGP interface. While installing Windows 11 itself was relatively easy by bypassing Microsoft's hardware checks, getting the graphics card fully functional proved to be some challenge. Microsoft had quietly dropped native AGP support after the earliest releases of Windows 10, meaning newer versions of Windows no longer include the necessary Graphics Address Remapping Table (GART) drivers required for proper AGP acceleration. Without them, AGP graphics cards typically boot up, though with limited functionality, and can often throw a Code 43 error in Device Manager. To work around the limitation, Omores extracted Intel's legacy AGP440 SYS driver from an early Windows 10 release and paired it with a modified INF file so Windows 11 would correctly recognize the chipset. Following this and combined with AMD's final 64-bit Catalyst AGP drivers from 2012, the Radeon HD 4650 was able to operate with full AGP 8X acceleration intact. The result was said to be surprisingly usable for hardware that is over two decades old. Hardware-accelerated H.264 video playback worked correctly and benefited apps like Firefox, while legacy applications and games ran without major graphical issues. The system also successfully completed the 3DMark 2001 benchmark, although performance naturally lagged behind what the same hardware achieves under Windows 7, which is significantly lighter than Windows 11. There was, however, one unavoidable limitation as Microsoft's Windows 11 version 24H2 introduces a mandatory SSE4.2 CPU instruction requirement that cannot be bypassed through installer modifications or registry tweaks. Since no AGP-era processor supports SSE4.2, Windows 11 version 23H2 effectively becomes the final release capable of running on such systems. Regardless, it is still a very cool feat and quite fascinating to see just how stable Windows 11 turned out to be on such unfamiliar hardware. Source: Omores (Patreon) via O_MORES (Reddit)
    • That will only really help other players that are also responsible for creating the problem.
    • Well, it's good to know that they have found a workaround to a problem that they helped create, I guess...
    • Meta is reusing old DDR4 RAM in its servers instead of buying new hardware by Ivan Jenic Image: Meta The global hardware shortage isn’t exactly news, as the entire world has been struggling with rising component prices for quite some time now. And while big companies certainly aren’t as affected as the average consumer, even they aren’t opposed to the idea of saving a few (million) bucks. Meta appears to have found a way to spend less on new hardware while also putting its outdated infrastructure to use, essentially killing two birds with one stone. The company has built a custom chip that lets it reuse memory from retired servers rather than buying new hardware. The chip is called Vistara and allows for connecting old DDR4 RAM from obsolete servers into new servers that rely on DDR5. The problem Vistara solves goes back to a basic mismatch in how long hardware lasts. Meta replaces its servers every three to five years, but the memory modules inside them are good for seven to ten. When a server gets decommissioned, perfectly usable DDR4 RAM goes with it. Meta is presenting the new method at today’s ISCA symposium, but The Register has got hold of a paper that explains how Vistara works. It's a custom ASIC that bridges DDR4 memory to newer processors via aCXL 2.0/1.1 interface over PCIe Gen5 x16. Meta pulls DDR4 sticks from old machines and installs them in dedicated units it calls MemServers, each of which pairs 768GB of DDR5 with 256GB of recovered DDR4. The operating system sees the DDR4 as an additional memory node and draws from it when the primary DDR5 is running low. Off-the-shelf CXL hardware couldn't do this, so Meta built its own. Existing interfaces bundle their own memory with the controller, which makes reusing old RAM sticks impossible. But Vistara separates the controller from the memory entirely, so Meta can plug in whatever DDR4 sticks it has on hand. Meta plans to deploy the new architecture in hyperscale infrastructure with millions of servers, which should mean that Meta’s AI datacenters will now be more efficient. The company is investing heavily in AI infrastructure, especially with its new AI model, Muse Spark, now widely available. All of this doesn't mean that Meta will exclusively rely on "recycled" RAM, but the company is still looking at considerable savings at scale.
    • Save up to 87% on ChatPlayground AI lifetime subscriptions by Steven Parker Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where for only a limited time, you can save up to 87% on ChatPlayground AI: lifetime subscriptions. ChatPlayground AI puts the world’s top AI models in one powerful interface, letting you enter a single prompt and instantly compare outputs from multiple models to choose the perfect response for your needs. Boost productivity and creativity with access to the latest AI giants like GPT-4o, Claude Sonnet 4, Gemini 1.5 Flash, DeepSeek V3, and dozens more — all in one window. Whether you’re chatting, coding, generating images, or refining prompts, ChatPlayground AI equips you with advanced tools like prompt engineering, image/PDF chat, saved conversations, and AI image creation, plus priority support to keep your workflow seamless. Access the world’s best AI models Side-by-Side Comparisons: Enter one prompt & instantly view results from multiple AI models to find the best output for your needs 40+ AI Models: Includes GPT-4o, Claude Sonnet 4, Gemini 1.5 Flash, DeepSeek V3, Llama, Perplexity, and many more Multi-Function Platform: Access AI for chat, image generation & coding all within a single interface Web Browser Extension: Offers a Chrome extension to seamlessly integrate the platform into your browsing workflow Boost productivity with powerful features ChatPlayground Interface: Designed for seamless AI model comparison in one window Prompt Engineering: Refine & optimize your prompts for better, more accurate responses Chat with Images & PDFs: Upload visuals and documents to get context-aware answers Saved Chat History: Keep track of past conversations for reference & ongoing projects AI Image Generation: Create high-quality visuals powered by top AI image models Priority Customer Support: Get faster assistance whenever you need it What you'll get with the Unlimited Plan Includes unlimited messages/month Built for prompt engineers, startups, and teams who run experiments nonstop Includes priority access to new features and future models Good to know Length of access: lifetime Redemption deadline: redeem your code within 30 days of purchase Access options: Desktop Max number of device(s): Unlimited Available to both NEW & Existing users Updates included A lifetime subscription to ChatPlayground AI (Unlimited Plan) normally costs $619, but you can pick it up for just $79 for a limited time - that represents a saving of $530 (87% off). Click the link below for more details, always check terms and specifications before making a purchase. Get this ChatPlayground AI (Unlimited) for $79 (was $619) There are also two other discounted plans to choose from. Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      539
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!