Recommended Posts

Hey guys!

I'm thinking of upgrading my deepcool de600 psu to this corsair cx550m power supply but I can't decide because I've seen so many good and bad reviews about this one. What are your thoughts about this?

 

My Specs:

Micro atx board

Ryzen 5 1400 (upgrading to 3000 series in the future)

Gtx 1050 ti 4gb OC (upgrading to an rx580 8gb or gtx 1660 in the future)

2x8 gb ddr4 3200mhz

1 hdd(1 tb)

1 hdd(500 gb)

1 nvme m.2 ssd(250 gb)

1 sata ssd(120 gb)

 

Link to comment
https://www.neowin.net/forum/topic/1396683-corsair-cx550m-is-it-a-budget-psu/
Share on other sites

Want to give us exact products, not just "mATX board" or "GTX 1050". Brand names will help us more.

 

Why are you going from a 600W to 550W? With your hardware (I'm guessing) 550W is a bit low. Plus your upgrades.

 

Corsair CX is actuallyt a budget PSU. I'd rather you go with a SeaSoniic. They are good.

14 minutes ago, Mindovermaster said:

Want to give us exact products, not just "mATX board" or "GTX 1050". Brand names will help us more.

 

Why are you going from a 600W to 550W? With your hardware (I'm guessing) 550W is a bit low. Plus your upgrades.

 

Corsair CX is actuallyt a budget PSU. I'd rather you go with a SeaSoniic. They are good.

The rest of that build is budget as well.  The Deepcool is a 450W sustained 600W peak and isn't 80+ rated so the CX550M is likely much better.  If they can get a good deal on it I'd say why not?

9 hours ago, LostCat said:

The rest of that build is budget as well.  The Deepcool is a 450W sustained 600W peak and isn't 80+ rated so the CX550M is likely much better.  If they can get a good deal on it I'd say why not?

My current power supply is not 80+ rated, so I think getting an 80+ bronze efficient psu would get me an upgrade.

9 hours ago, Mindovermaster said:

Want to give us exact products, not just "mATX board" or "GTX 1050". Brand names will help us more.

 

Why are you going from a 600W to 550W? With your hardware (I'm guessing) 550W is a bit low. Plus your upgrades.

 

Corsair CX is actuallyt a budget PSU. I'd rather you go with a SeaSoniic. They are good.

Msi b450m mortar max

Zotac gtx 1050 ti OC 4gb

 

My current psu is not 80+ rated, should i go save some more and get something around a 80+ 750w for future proofing.

oh...70 bucks.  I had to double check pcpartpicker to make sure I wasn't crazy ... I could have sworn I've seen them for around 40-60 bucks.  Sure enough, according to them, they've been that low for long stretches of time on NewEgg.  It seems prices have pretty much skyrocketed the last 9-12 months.  /sigh

 

Even still ... looking at NewEgg for 80+ Bronze, that wattage ... it would still be the PSU I would pick up if on a budget (except it is $80 on NewEgg and they are out of stock).

 

Just seems to be a really bad time to buy components right now.  Any reason you need it now or can you wait until things start normalizing again?  If you do need it now ... it'll be fine I guess.  🙂 

 

 

1 hour ago, Jim K said:

oh...70 bucks.  I had to double check pcpartpicker to make sure I wasn't crazy ... I could have sworn I've seen them for around 40-60 bucks.  Sure enough, according to them, they've been that low for long stretches of time on NewEgg.  It seems prices have pretty much skyrocketed the last 9-12 months.  /sigh

 

Even still ... looking at NewEgg for 80+ Bronze, that wattage ... it would still be the PSU I would pick up if on a budget (except it is $80 on NewEgg and they are out of stock).

 

Just seems to be a really bad time to buy components right now.  Any reason you need it now or can you wait until things start normalizing again?  If you do need it now ... it'll be fine I guess.  🙂 

 

 

Prices on a lot of stuff is out of control right now. 

1 hour ago, Jim K said:

oh...70 bucks.  I had to double check pcpartpicker to make sure I wasn't crazy ... I could have sworn I've seen them for around 40-60 bucks.  Sure enough, according to them, they've been that low for long stretches of time on NewEgg.  It seems prices have pretty much skyrocketed the last 9-12 months.  /sigh

 

Even still ... looking at NewEgg for 80+ Bronze, that wattage ... it would still be the PSU I would pick up if on a budget (except it is $80 on NewEgg and they are out of stock).

 

Just seems to be a really bad time to buy components right now.  Any reason you need it now or can you wait until things start normalizing again?  If you do need it now ... it'll be fine I guess.  🙂 

 

 

In my country, the price of that psu is equivalent to $70, but I can't decide because I've read so many bad reviews on Amazon and Newegg. 

3 minutes ago, Newb said:

In my country, the price of that psu is equivalent to $70, but I can't decide because I've read so many bad reviews on Amazon and Newegg. 

EVERYTHING has bad reviews. Don't base your purchases off them. It's dumb people doing stupid things with them. Try looking at professional hard-info reviews about products. Or ask about it here. We know most "budget" brands that are still good.

 

Send some links, and we can tell you if they are good, 'just ok' or carpy.

23 minutes ago, Mindovermaster said:

EVERYTHING has bad reviews. Don't base your purchases off them. It's dumb people doing stupid things with them. Try looking at professional hard-info reviews about products. Or ask about it here. We know most "budget" brands that are still good.

 

Send some links, and we can tell you if they are good, 'just ok' or carpy.

17% of reviews on Newegg are 1 Star, but there are only 127 reviews. overall it has a 3.9 star rating. That’s about what I would expect of any bronze rated PSU. @OP: if you want better stuff, use gold as a minimum rating. That said, this has good overall reviews for a budget PSU. 

  • Thanks 1
3 minutes ago, adrynalyne said:

17% of reviews on Newegg are 1 Star, but there are only 127 reviews. overall it has a 3.9 star rating. That’s about what I would expect of any bronze rated PSU. @OP: if you want better stuff, use gold as a minimum rating. 

I guess that's the logical way... I'm planning to upgrade my main components soon so I dont want to mess up on buying a psu

29 minutes ago, Mindovermaster said:

EVERYTHING has bad reviews. Don't base your purchases off them. It's dumb people doing stupid things with them. Try looking at professional hard-info reviews about products. Or ask about it here. We know most "budget" brands that are still good.

 

Send some links, and we can tell you if they are good, 'just ok' or carpy.

With that being said, what are your thoughts about cooler master mwe series for gaming? I've also been eyeing that psu for a while. I just want to hear your opinion

15 minutes ago, adrynalyne said:

17% of reviews on Newegg are 1 Star, but there are only 127 reviews. overall it has a 3.9 star rating. That’s about what I would expect of any bronze rated PSU. @OP: if you want better stuff, use gold as a minimum rating. That said, this has good overall reviews for a budget PSU. 

I'm happy with bronze or silver, at least it means they aren't bottom of the barrel stuff.

 

The only bad experience I've had was high end stuff (850W) that hasn't played nice with my house wiring.

7 minutes ago, Newb said:

I guess that's the logical way... I'm planning to upgrade my main components soon so I dont want to mess up on buying a psu

One thing I would spare no expense on is the PSU. It’s a very important part of your PC and it can really make a mess of things when it goes bad. 

1 minute ago, LostCat said:

I'm happy with bronze or silver, at least it means they aren't bottom of the barrel stuff.

 

The only bad experience I've had was high end stuff (850W) that hasn't played nice with my house wiring.

They work—I’m just a PSU snob. I want clean, efficient power and don’t want to risk my system dying on a cheap PSU. 

I go by this:

 

https://linustechtips.com/main/topic/1116640-psucultists-psu-tier-list/

 

Some say this is bogus, but I go by it, and never had any issues...

13 minutes ago, adrynalyne said:

They work—I’m just a PSU snob. I want clean, efficient power and don’t want to risk my system dying on a cheap PSU. 

Fair enough, but with modern system components I can't see a need to go high end unless you use extra hard drives or GPUs.  Or Xeon/Threadripper/EPYC systems anyway.

39 minutes ago, LostCat said:

Absolutely.  I've got an upper mid range system (two HDs 3 SSDs a 5700 XT Ryzen 2600X and 16GB of RAM) and I don't see the point of going higher than 600-650.

And then look at me who has a 1200W PSU... 🤣

I've had my Corsair CX550M for years - it's a quality (yet BUDGET) PSU.  It's 80+-rated, it can work in any configuration from mATX to full ATX, and can even drive SLI configurations in mATX - not easy to do.  Why folks want high-wattage PSUs is usually due to large numbers of platter drives.  I get it; platter drives - and especially those with large capacities - can eat wattage like Reese's Pieces.  The real issue nowadays with how much PSU will be storage - and platter drives in particular.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • I wonder what that line really meant...
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      72
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!