MSI PRO Z690-A DDR4 CPU Red Light


Recommended Posts

First things first board was already tested and prebuilt by novatech 

Link to motherboard is here https://www.novatech.co.uk/motherboardbundles/view/mbb-12616b.html and pc case we are using is here https://www.amazon.co.uk/gp/product/B07KGSJRC3/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

My brother trying to build a new pc and we are having a cpu red light issue motherboard  we did  bench test and got it to boot in to the bios before trying  to put it in pc case

curious questions ahead!!

 1 the case already came with standoffs and holes to screws down the motherboard am sure ma brother said there was 9 in total but i now heard the motherboard may have it own screws - standoff so do we use them instead?

2. we done all the usual pc troubleshooting such as replacing ram checking connections are in snuggly and tight and even  reset cmos no dice 

What i dont get is we bench tested it first and were successful now if try to bench test it cpu read light.

our current issue is it power on for a bit and shut off again and then switches back on and is stuck in a loop no post

Building a pc is becoming a disheartening process but i really hope we can solve this issue and make it a possible win.

 

Link to comment
https://www.neowin.net/forum/topic/1424539-msi-pro-z690-a-ddr4-cpu-red-light/
Share on other sites

I would try it out of the case, on a piece of cardboard. Count the number of holes in the motherboard and the number of standoffs in the case. Could just be you are shorting out the board.

Being it ATX, it should actually have 10 holes..

  On 30/12/2022 at 01:15, Mindovermaster said:

I would try it out of the case, on a piece of cardboard. Count the number of holes in the motherboard and the number of standoffs in the case. Could just be you are shorting out the board.

Being it ATX, it should actually have 10 holes..

Expand  

https://asset.msi.com/resize/image/global/product/product_16353230217db67a74738c0b1d76f53ec9a93133af.png62405b38c58fe0f07fcef2367d8a9ba1/1024.png
 

i only see 9 holes

  On 30/12/2022 at 07:44, Rika86 said:
Expand  

My mistake..

 

  On 30/12/2022 at 09:38, Rika86 said:

Since i cant edit my post trying on a piece of cardboard  worked at first that was the first thing we done before we put it in the case but it no longer works cpu red light  after taking it back out of case.

 

Expand  

What do you mean by cpu red light ?

You do have the appropriate CPU power cable going to the CPU power header on the board? 

You've tried to clear the CMOS. 

Have you tried to POST with the bare minimum (like with just one stick of memory and removal of a dedicated GPU...if applicable)?  Bare minimum is just CPU and one stick of memory...nothing else plugged in (aside from the CPU power/24pin power).

Lastly (after clearing CMOS, trying to POST w/ bare minimums) ... have you tried to reseat the CPU? 

If you've done all of that...might just need to RMA the board or return it to the place of purchase.

  On 30/12/2022 at 14:50, Mindovermaster said:

My mistake..

 

What do you mean by cpu red light ?

Expand  

I would assume the motherboard has LED lights on a corner of the motherboard, labeled CPU, power and a few others and they go green or red.

  • Thanks 1
  On 30/12/2022 at 16:46, Warwagon said:

I would assume the motherboard has LED lights on a corner of the motherboard, labeled CPU, power and a few others and they go green or red.

Expand  

Oh my goddam mind.. I didn't know what he meant by that.. Thanks for showing me the light, WarWagon! :D

  • Like 1
  On 30/12/2022 at 16:54, Mindovermaster said:

Oh my goddam mind.. I didn't know what he meant by that.. Thanks for showing me the light, WarWagon! :D

Expand  

I only know that because I helped someone asseble a ryzen system a couple months ago and they had those exact lights 😁

  • Thanks 1

@Warwagon

you hit the nail and thank you for filling Mindovermaster in on the cpu red light

@ jim k

there are three power connectors if you check the screenshot link posted do you want me to only connect the 24 pin one?

what i dont get when we bench tested it before putting in  it booted to bios no problem now it wont after been put in case or out of case this is the second motherboard am on had the same issue with a gigabyte motherboard

also novatech bundle already had the cpu installed with cooler and ram so that kind of rules them out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If you look at all RAID implementations that exist, you're going to find exceptions. However, all the modern consumer varieties tend to have some things in common (by default). I'll stick to describing those. When you add a disk to a RAID array, metadata is stored at the end of the disk. It records the array the disk is part of, which other disks are in the array, etc. This is called the RAID superblock. If you create a RAID 1 array, your operating system will see them all as a single disk that is very slightly smaller than a single disk (due to the superblock). Everything you write to the RAID disk gets written identically to each of its member disks by the storage controller. Technically, disks are read/written in blocks (each block is multiple sectors in size), but this is all transparent to the user. Every file you create or change or delete is created/changed/deleted on every member disk simultaneously. This is true whether you have 2 disks in the array or more than 2.  If one disk completely fails, you can still operate just fine off the remaining disk(s) (but see the caution below). If you remove one disk and attach it to another PC, it should work fine. The partition information and everything is all at the front of the disk, just as expected. The superblock will just appear as some extra junk at the very end of the disk, outside any partition. In some scenarios, where it is recognized as a RAID member disk from another PC, there might be an extra step before it will let you use it, but it's all very doable. Caution:  Blocks are read from the disks in a staggered fashion. For example, with 2 disks, all the odd blocks are read from one disk and all the even blocks are read from the other. By working together like this, read speeds can be practically doubled. But this comes with a huge drawback. If a disk doesn't fail completely, but instead develops bad sectors, you may not realize it. The bad sectors may happen to be in blocks that are never read on that disk. In some cases, people have had bad sectors develop on one disk, then had the other disk fail, and only then realized that the remaining disk has bad sectors and corrupt data. Every backup method has its pros and cons. Never trust just RAID, or just an external HDD, or just the cloud. Use multiple methods to backup important data.
    • Evidence that it affects "most" people negatively? Based on what? The fact that their are millions of users in fact show me the opposite, that "most" are quite happy.
  • Recent Achievements

    • Conversation Starter
      Kavin25 earned a badge
      Conversation Starter
    • One Month Later
      Leonard grant earned a badge
      One Month Later
    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      537
    2. 2
      ATLien_0
      205
    3. 3
      +FloatingFatMan
      167
    4. 4
      Michael Scrip
      151
    5. 5
      Som
      127
  • Tell a friend

    Love Neowin? Tell a friend!