Display connection might be limited

By neufuse
in Hardware Hangout

 Share

Recommended Posts

Grand Master

neufuse Veteran

Posted
  • Veteran
Posted

I get this in windows 11 but not in windows 10...

USB popup saying "Display connection might be limited. Make sure the DisplayPort device you're connecting to is supported by your PC."

my Dell U2720QM Monitor is connected via standard display port. Yet I get this message when I want to use the USB Ports on my monitor. I have the USB Hub in the monitor connected back to the system via USB-C, which is the only way the uplink port goes back.

Why would my display connection be limited? nothing is limiting it, and there is no video over USB-C set up, thunderbolt is turned off on in the BIOS config as I am powering this monitor over a nVIDIA RTX 3080 card and have no need for thunderbolt either.

What am I missing? I want to use the monitors side USB  ports and use the display port connection to the dedicated card and not get this warning every time I start up in windows 11

image.png.f85469e9b5518bc4e1d6ea7a842d5682.png

Link to comment
https://www.neowin.net/forum/topic/1429399-display-connection-might-be-limited/
Share on other sites
Grand Master

adrynalyne

Posted
Posted (edited)
On 21/05/2023 at 08:43, Mindovermaster said:

You keep having problems over problems.. :laugh: 

I think it's just a Windows 11 bug, imo.. If it works fine, why?

This is how rumors start. Go ahead and explain why it’s a Windows 11 bug. 

On 21/05/2023 at 08:27, neufuse said:

I get this in windows 11 but not in windows 10...

USB popup saying "Display connection might be limited. Make sure the DisplayPort device you're connecting to is supported by your PC."

my Dell U2720QM Monitor is connected via standard display port. Yet I get this message when I want to use the USB Ports on my monitor. I have the USB Hub in the monitor connected back to the system via USB-C, which is the only way the uplink port goes back.

Why would my display connection be limited? nothing is limiting it, and there is no video over USB-C set up, thunderbolt is turned off on in the BIOS config as I am powering this monitor over a nVIDIA RTX 3080 card and have no need for thunderbolt either.

What am I missing? I want to use the monitors side USB  ports and use the display port connection to the dedicated card and not get this warning every time I start up in windows 11

image.png.f85469e9b5518bc4e1d6ea7a842d5682.png

Have you tried another cable to connect your monitor?

Grand Master

Steven P. Administrators

Posted
  • Administrators
Posted

I used to have a 27" G Sync Dell and that had a USB hub too, but it used the following cable:

image.png

This is what a USB uplink usually looks like. I haven't seen one with a Type C connector, Type C is usually used for Thunderbolt/DisplayPort connections.

I am using one right now from DisplayPort to Type C on a mini PC. You will find that Type C ports will also have a DisplayPort symbol on it.

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
On 21/05/2023 at 13:44, adrynalyne said:

This is how rumors start. Go ahead and explain why it’s a Windows 11 bug. 

Explain why it isn't..

"Think" means, I'm not sure, just my opinion on the matter. If it's wrong, it's wrong.

  • hellowalkman
  • Like 1
Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
On 21/05/2023 at 13:57, Steven P. said:

image.jpeg

Make sure the Type C connector is in the right port. You want to make sure the USB Hub connection isn;t in the one with the DisplayPort symbol. (use the one with the red arrow).

Good catch. I forgot about that.. I know they use different DP ports for usual PC connection, and daisy chain.

Grand Master

adrynalyne

Posted
Posted
On 21/05/2023 at 11:55, Mindovermaster said:

Explain why it isn't..

"Think" means, I'm not sure, just my opinion on the matter. If it's wrong, it's wrong.

I know what I means but clearly you cannot even back up your own opinion. 

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted
On 21/05/2023 at 14:57, Steven P. said:

image.jpeg

Make sure the Type C connector is in the right port. You want to make sure the USB Hub connection isn't in the one with the DisplayPort symbol. (use the one with the red arrow).

yeah that's which one it is plugged into the upstream usb-c port, yet it keeps thinking its trying to use thunderbolt

On 21/05/2023 at 11:43, Mindovermaster said:

You keep having problems over problems.. :laugh: 

I think it's just a Windows 11 bug, imo.. If it works fine, why?

this is a completely different system too with a new monitor

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted (edited)
On 21/05/2023 at 14:57, Steven P. said:

image.jpeg

Make sure the Type C connector is in the right port. You want to make sure the USB Hub connection isn't in the one with the DisplayPort symbol. (use the one with the red arrow).

image.thumb.png.7406c2f1779dc3e67bfbd58e83e4d40a.png

According to the manual the upstream USB-C port is also display port, there is no independent upsteam USB port, the two USB3 downstream ports are not upstream. The input on the screen is set to Display Port not USB Type-C for the video. Windows seems to think that the USB-C even though DisplayPort on it is turned off in the bios is still a display port via USB-C

 

Contributor

FizzyChickenBroth

Posted
Posted (edited)

Check to see if your USB-C setting is prioritized for data or resolution. I have a similar monitor and noticed my internet speeds weren't maxing out at 1Gbps and changed it from max graphics to max data.  My graphics didn't seem to take any hit but my ethernet capped out after the change. 

image.thumb.png.74984558d30373f8bfac07271c7a6bf8.png

 

Chances are you can probably safely ignore that message if you're getting your intended resolution. The warning may go away if you happen to have it set to max data and toggle to max resolution instead. 

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted (edited)
On 21/05/2023 at 18:08, FizzyChickenBroth said:

Check to see if your USB-C setting is prioritized for data or resolution. I have a similar monitor and noticed my internet speeds weren't maxing out at 1Gbps and changed it from max graphics to max data.  My graphics didn't seem to take any hit but my ethernet capped out after the change. 

image.thumb.png.74984558d30373f8bfac07271c7a6bf8.png

 

Chances are you can probably safely ignore that message if you're getting your intended resolution. The warning may go away if you happen to have it set to max data and toggle to max resolution instead. 

graphics aren't going through the USB-C cable, they are going through a DP cable, so that wouldn't affect resolution, but the USB-C port is set to data but that shouldn't matter as the motherboard's bios is set to disable video on USB-C since I'm not using it for that 

right now nothing is affected by it, just an annoying windows pop up randomly warning me about it, which I can't seem to stop even with notifications for it turned off

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted
On 21/05/2023 at 14:51, Steven P. said:

I used to have a 27" G Sync Dell and that had a USB hub too, but it used the following cable:

image.png

This is what a USB uplink usually looks like. I haven't seen one with a Type C connector, Type C is usually used for Thunderbolt/DisplayPort connections.

I am using one right now from DisplayPort to Type C on a mini PC. You will find that Type C ports will also have a DisplayPort symbol on it.

this monitor has no type b or type b 3 connectors, only USB-C upstream ports and 2 USB 3 Type A downstream ports on the bottom and 1 Type A / 1 Type C downstream on the side

Grand Master

goretsky Supervisor

Posted
  • Supervisor
Posted

Hello,

It sounds like the monitor is trying to negotiate a DisplayLink connection to the computer with the Nvidia RTX 3080 video card in it over the computer's USB-C port.  That's just a guess on my part, though, since I haven't seen any mention of the brand and model of computer and do not know what its capabilities may or may not be.

 

Regards,

Aryeh Goretsky
 

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
On 23/05/2023 at 13:42, neufuse said:

Dell support - "This is a normal message when using the USB ports on this monitor inside of Windows 10 or 11"

ok....

Umm.. Yeah.. Just another way of saying they don't know either..

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted (edited)
On 23/05/2023 at 17:11, Mindovermaster said:

Umm.. Yeah.. Just another way of saying they don't know either..

yeah, that's basically what I expected from dell support too... but had to ask just incase there was something they knew... wish I knew how to stop this, not hurting anything just annoying how it randomly pops up warning about it.. and it's only on this monitor, I have other USB-C capable dell monitors that are larger 4K displays and they don't do this

Edited by neufuse
  • Mindovermaster
  • Sad 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Major Xbox layoffs may claim South of Midnight developer Compulsion entirely

      By nekrosoft13 · Posted

      they should stop making bad games that no one asked for
    • Samsung is shutting down yet another app used by millions

      By +Edouard · Posted

      Nice rant! Expletive after expletive after expletive. Poor petal, I've touched a nerve. Would you like a tissue to wipe those tears away. Btw, nice one calling Neowin trash. Why would you stick around when you disrespect this site and the people behind it? Just go away if you feel that way.
    • The official Funny Pictures thread

      By +Edouard · Posted

    • Internet Download Manager (IDM) 6.43 Build 1

      By Copernic · Posted

      Internet Download Manager (IDM) 6.43 Build 1 by Razvan Serea Internet Download Manager (IDM) is a tool to increase download speeds by up to 8 times due to its smart dynamic file segmentation technology. Unlike other download managers and accelerators, Internet Download Manager segments downloaded files dynamically during download process, and it reuses available connections without additional connect and login stages to achieve the best possible acceleration performance. Comprehensive error recovery and resume capability will restart broken or interrupted downloads due to lost connections, network problems, computer shutdowns, or unexpected power outages. All popular browsers are supported IDM integrates seamlessly into Google Chrome, FireFox, Microsoft Edge, Opera, Safari, Internet Explorer, Maxthon and all other popular browsers to automatically handle your downloads. You can also drag and drop files, or use Internet Download Manager from command line. The program supports proxy servers, ftp and http protocols, firewalls, redirects, cookies, authorization, MP3 audio and video content processing. IDM includes web site spider and grabber IDM downloads all required files that are specified with filters from web sites, for example all pictures from a web site, or subsets of web sites, or complete web sites for offline browsing. It's possible to schedule multiple grabber projects to run them once at a specified time, stop them at a specified time, or run periodically to synchronize changes. Easy downloading with one click When you click on a download link in a browser, IDM will take over the download and accelerate it. You don't need to do anything special, just browse the Internet as you usually do. IDM will catch your downloads and accelerate them. IDM supports HTTP, FTP, HTTPS and MMS protocols. Changes in Internet Download Manager 6.43 Build 1: Added the ability to download MP4 files from web sites where previously only TS videos were available. IDM displays both TS and MP4 file formats in its video download button. If you only need MP4 files, disable TS in IDM Options -> General tab -> Customize IDM Download panels in browsers -> Edit button. Remove TS extension on "Customize IDM Download panel in browsres" dialog Fixed video downloading problems on several popular web sites Fixed bugs Download: Internet Download Manager 6.43 Build 1 | 11.9 MB (Shareware) Links: Internet Download Manager Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Samsung is shutting down yet another app used by millions

      By +Good Bot, Bad Bot · Posted

      This is of course "clickbait" WTF? It is literally your example but tech based. A "clickbait" title is a sensationalized headline designed to manipulate readers into clicking a link using things like "fear" rather than delivering objective facts. A "clickbait" headline also usually provides little value compared to the hype generated. How does this headline not qualify? It's a generic often reused headline that is overly sensationalized. Oh no! "millions" can't use this app anymore. It has no basic facts like what f*cking app. You read the article and it's the Samsung VPN which no one cares about and there is a million free VPNs. How are you defending this ######? Headlines like this (and among other things) make me read Neowin much less than I used to in the past. It's trash...

  • Recent Achievements

    • Veteran
      branfont went up a rank
      Veteran
    • Reacting Well
      Almohandis earned a badge
      Reacting Well
    • First Post
      Cosminus earned a badge
      First Post
    • One Year In
      ThatGuyOnline earned a badge
      One Year In
    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      472
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      120
    4. 4
      Steven P.
      85
    5. 5
      neufuse
      73
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!