Display connection might be limited

By neufuse
in Hardware Hangout

 Share

Recommended Posts

Grand Master

neufuse Veteran

Posted
  • Veteran
Posted

I get this in windows 11 but not in windows 10...

USB popup saying "Display connection might be limited. Make sure the DisplayPort device you're connecting to is supported by your PC."

my Dell U2720QM Monitor is connected via standard display port. Yet I get this message when I want to use the USB Ports on my monitor. I have the USB Hub in the monitor connected back to the system via USB-C, which is the only way the uplink port goes back.

Why would my display connection be limited? nothing is limiting it, and there is no video over USB-C set up, thunderbolt is turned off on in the BIOS config as I am powering this monitor over a nVIDIA RTX 3080 card and have no need for thunderbolt either.

What am I missing? I want to use the monitors side USB  ports and use the display port connection to the dedicated card and not get this warning every time I start up in windows 11

image.png.f85469e9b5518bc4e1d6ea7a842d5682.png

Link to comment
https://www.neowin.net/forum/topic/1429399-display-connection-might-be-limited/
Share on other sites
Grand Master

adrynalyne

Posted
Posted (edited)
On 21/05/2023 at 08:43, Mindovermaster said:

You keep having problems over problems.. :laugh: 

I think it's just a Windows 11 bug, imo.. If it works fine, why?

This is how rumors start. Go ahead and explain why it’s a Windows 11 bug. 

On 21/05/2023 at 08:27, neufuse said:

I get this in windows 11 but not in windows 10...

USB popup saying "Display connection might be limited. Make sure the DisplayPort device you're connecting to is supported by your PC."

my Dell U2720QM Monitor is connected via standard display port. Yet I get this message when I want to use the USB Ports on my monitor. I have the USB Hub in the monitor connected back to the system via USB-C, which is the only way the uplink port goes back.

Why would my display connection be limited? nothing is limiting it, and there is no video over USB-C set up, thunderbolt is turned off on in the BIOS config as I am powering this monitor over a nVIDIA RTX 3080 card and have no need for thunderbolt either.

What am I missing? I want to use the monitors side USB  ports and use the display port connection to the dedicated card and not get this warning every time I start up in windows 11

image.png.f85469e9b5518bc4e1d6ea7a842d5682.png

Have you tried another cable to connect your monitor?

Grand Master

Steven P. Administrators

Posted
  • Administrators
Posted

I used to have a 27" G Sync Dell and that had a USB hub too, but it used the following cable:

image.png

This is what a USB uplink usually looks like. I haven't seen one with a Type C connector, Type C is usually used for Thunderbolt/DisplayPort connections.

I am using one right now from DisplayPort to Type C on a mini PC. You will find that Type C ports will also have a DisplayPort symbol on it.

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
On 21/05/2023 at 13:44, adrynalyne said:

This is how rumors start. Go ahead and explain why it’s a Windows 11 bug. 

Explain why it isn't..

"Think" means, I'm not sure, just my opinion on the matter. If it's wrong, it's wrong.

  • hellowalkman
  • Like 1
Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
On 21/05/2023 at 13:57, Steven P. said:

image.jpeg

Make sure the Type C connector is in the right port. You want to make sure the USB Hub connection isn;t in the one with the DisplayPort symbol. (use the one with the red arrow).

Good catch. I forgot about that.. I know they use different DP ports for usual PC connection, and daisy chain.

Grand Master

adrynalyne

Posted
Posted
On 21/05/2023 at 11:55, Mindovermaster said:

Explain why it isn't..

"Think" means, I'm not sure, just my opinion on the matter. If it's wrong, it's wrong.

I know what I means but clearly you cannot even back up your own opinion. 

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted
On 21/05/2023 at 14:57, Steven P. said:

image.jpeg

Make sure the Type C connector is in the right port. You want to make sure the USB Hub connection isn't in the one with the DisplayPort symbol. (use the one with the red arrow).

yeah that's which one it is plugged into the upstream usb-c port, yet it keeps thinking its trying to use thunderbolt

On 21/05/2023 at 11:43, Mindovermaster said:

You keep having problems over problems.. :laugh: 

I think it's just a Windows 11 bug, imo.. If it works fine, why?

this is a completely different system too with a new monitor

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted (edited)
On 21/05/2023 at 14:57, Steven P. said:

image.jpeg

Make sure the Type C connector is in the right port. You want to make sure the USB Hub connection isn't in the one with the DisplayPort symbol. (use the one with the red arrow).

image.thumb.png.7406c2f1779dc3e67bfbd58e83e4d40a.png

According to the manual the upstream USB-C port is also display port, there is no independent upsteam USB port, the two USB3 downstream ports are not upstream. The input on the screen is set to Display Port not USB Type-C for the video. Windows seems to think that the USB-C even though DisplayPort on it is turned off in the bios is still a display port via USB-C

 

Contributor

FizzyChickenBroth

Posted
Posted (edited)

Check to see if your USB-C setting is prioritized for data or resolution. I have a similar monitor and noticed my internet speeds weren't maxing out at 1Gbps and changed it from max graphics to max data.  My graphics didn't seem to take any hit but my ethernet capped out after the change. 

image.thumb.png.74984558d30373f8bfac07271c7a6bf8.png

 

Chances are you can probably safely ignore that message if you're getting your intended resolution. The warning may go away if you happen to have it set to max data and toggle to max resolution instead. 

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted (edited)
On 21/05/2023 at 18:08, FizzyChickenBroth said:

Check to see if your USB-C setting is prioritized for data or resolution. I have a similar monitor and noticed my internet speeds weren't maxing out at 1Gbps and changed it from max graphics to max data.  My graphics didn't seem to take any hit but my ethernet capped out after the change. 

image.thumb.png.74984558d30373f8bfac07271c7a6bf8.png

 

Chances are you can probably safely ignore that message if you're getting your intended resolution. The warning may go away if you happen to have it set to max data and toggle to max resolution instead. 

graphics aren't going through the USB-C cable, they are going through a DP cable, so that wouldn't affect resolution, but the USB-C port is set to data but that shouldn't matter as the motherboard's bios is set to disable video on USB-C since I'm not using it for that 

right now nothing is affected by it, just an annoying windows pop up randomly warning me about it, which I can't seem to stop even with notifications for it turned off

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted
On 21/05/2023 at 14:51, Steven P. said:

I used to have a 27" G Sync Dell and that had a USB hub too, but it used the following cable:

image.png

This is what a USB uplink usually looks like. I haven't seen one with a Type C connector, Type C is usually used for Thunderbolt/DisplayPort connections.

I am using one right now from DisplayPort to Type C on a mini PC. You will find that Type C ports will also have a DisplayPort symbol on it.

this monitor has no type b or type b 3 connectors, only USB-C upstream ports and 2 USB 3 Type A downstream ports on the bottom and 1 Type A / 1 Type C downstream on the side

Grand Master

goretsky Supervisor

Posted
  • Supervisor
Posted

Hello,

It sounds like the monitor is trying to negotiate a DisplayLink connection to the computer with the Nvidia RTX 3080 video card in it over the computer's USB-C port.  That's just a guess on my part, though, since I haven't seen any mention of the brand and model of computer and do not know what its capabilities may or may not be.

 

Regards,

Aryeh Goretsky
 

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
On 23/05/2023 at 13:42, neufuse said:

Dell support - "This is a normal message when using the USB ports on this monitor inside of Windows 10 or 11"

ok....

Umm.. Yeah.. Just another way of saying they don't know either..

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted (edited)
On 23/05/2023 at 17:11, Mindovermaster said:

Umm.. Yeah.. Just another way of saying they don't know either..

yeah, that's basically what I expected from dell support too... but had to ask just incase there was something they knew... wish I knew how to stop this, not hurting anything just annoying how it randomly pops up warning about it.. and it's only on this monitor, I have other USB-C capable dell monitors that are larger 4K displays and they don't do this

Edited by neufuse
  • Mindovermaster
  • Sad 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Microsoft unveils new Surface Laptop with improved trackpad, Snapdragon X2, and more

      By FunkyMike · Posted

      Not even an OLED display on the laptops. Also it seems that the laptop design isn't the same as the Surface Ultra model. Looks like bargain bin at high prices.
    • Microsoft announces 12th-gen Surface Pro with Snapdragon X2 processors

      By tsupersonic · Posted

      make your own notch - it's not that hard
    • VirtualBox 7.2.10

      By Copernic · Posted

      VirtualBox 7.2.10 by Razvan Serea VirtualBox is a powerful x86 and AMD64/Intel64 virtualization product for enterprise as well as home use. Targeted at server, desktop and embedded use, it is now the only professional-quality virtualization solution that is also Open Source Software. Presently, VirtualBox runs on Windows, Linux, macOS, and Solaris hosts and supports a large number of guest operating systems including but not limited to Windows (NT 4.0, 2000, XP, Server 2003, Vista, 7, 8, Windows 10 and Windows 11), DOS/Windows 3.x, Linux (2.4, 2.6, 3.x, 4.x, 5.x and 6.x), Solaris and OpenSolaris, OS/2, OpenBSD, NetBSD and FreeBSD. Some of the features of VirtualBox are: Modularity. VirtualBox has an extremely modular design with well-defined internal programming interfaces and a client/server design. This makes it easy to control it from several interfaces at once: for example, you can start a virtual machine in a typical virtual machine GUI and then control that machine from the command line, or possibly remotely. VirtualBox also comes with a full Software Development Kit: even though it is Open Source Software, you don't have to hack the source to write a new interface for VirtualBox. Virtual machine descriptions in XML. The configuration settings of virtual machines are stored entirely in XML and are independent of the local machines. Virtual machine definitions can therefore easily be ported to other computers. VirtualBox 7.2.10 changelog: VMM: Fixed issue when CentOS 10 VM was not booting due to the message "Fatal glibc error: CPU does not support x86-64-v3" (​github:gh-642) Devices/EFI: Fixed booting issue when ARM VM had less than 1024 MiB of RAM assigned (​github:gh-679) USB: Fixed issue when it was not possible to attach USB device to headless VM on Apple Silicon/macOS 26.4.1 (​github:gh-631) Storage: Fixed issue when VIRTIO-SCSI device was not recognized as SSD device by guest system (​github:gh-634) Network: Fixed issue in E1000 emulation code which triggered debug log creation (​github:gh-645) Network: Fixed issue in E1000 emulation code which prevented OS/2 guest from booting (​github:gh-683) Linux Host: Fixed issue when VMs could not be started due to kernel oops (​github:gh-639) Linux Host and Guest: Fixed issue when kernel modules were failing to build with openSUSE 16.0 kernel Linux Host and Guest: Added initial support for kernel 7.1 Linux Host and Guest: Added extra fixes for RHEL 9.8 kernel (​github:gh-676) Linux Host and Guest: Added possibility to build source code using NASM instead of YASM as the assembler (​github:gh-520) Linux Guest Additions: Added initial support for Extended Data Control Protocol for clipboard sharing with Plasma on Wayland guests (​github:gh-33) Linux Guest Additions: Added extra fixes for preventing vboxvideo kernel module build with kernel version 7.0 and newer (​github:gh-655) OS/2 Guest Additions: Fixed issue when Shared Folders automount and clipboard sharing stopped working (​github:gh-551) Download: VirtualBox 7.2.10 | 170.0 MB (Open Source) Download: VirtualBox 7.2.10 Extension Pack | 19.1 MB View: VirtualBox Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • UK to ban under-16s from social media following a six-week trial with teenagers

      By FloatingFatMan · Posted

      OK, now ask yourself how are they going to enforce that law? By requiring every single adult to prove their age and provide their legal identity documents to an UNREGULATED 3rd party company that already has a long track record of multiple data breaches. Not to mention, parliament have voted AGAINST this ban, twice, and Starmer is going ahead anyway. So, where's the democracy here, because that looks like dictatorship to me. The solution here is parental responsibility, not government control. Run some public service announcements on TV and UK social media teaching parents how to setup parental controls. That's already been proven to actually work. But the, this is not and has NEVER been about keeping kids safe. It's about control and monitoring. Watching what you're doing online and controlling what you can see and what you can say.
    • what other retro software do yall use

      By +InsaneNutter · Posted

      Interesting read. I knew the adware was quite controversial at the time, however never realised to the point The Guardian wrote an article about Patchou. I just said no and enjoyed his creation, I’d probably be a lot more wary of something like that today though.

  • Recent Achievements

    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
    • First Post
      Dys Topia earned a badge
      First Post
    • Collaborator
      vjlex earned a badge
      Collaborator
    • Reacting Well
      Dys Topia earned a badge
      Reacting Well

  • Popular Contributors

    1. 1
      +primortal
      525
    2. 2
      +Edouard
      180
    3. 3
      PsYcHoKiLLa
      105
    4. 4
      Steven P.
      89
    5. 5
      ATLien_0
      70
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!