Display connection might be limited

By neufuse
in Hardware Hangout

 Share

Recommended Posts

Grand Master

neufuse Veteran

Posted
  • Veteran
Posted

I get this in windows 11 but not in windows 10...

USB popup saying "Display connection might be limited. Make sure the DisplayPort device you're connecting to is supported by your PC."

my Dell U2720QM Monitor is connected via standard display port. Yet I get this message when I want to use the USB Ports on my monitor. I have the USB Hub in the monitor connected back to the system via USB-C, which is the only way the uplink port goes back.

Why would my display connection be limited? nothing is limiting it, and there is no video over USB-C set up, thunderbolt is turned off on in the BIOS config as I am powering this monitor over a nVIDIA RTX 3080 card and have no need for thunderbolt either.

What am I missing? I want to use the monitors side USB  ports and use the display port connection to the dedicated card and not get this warning every time I start up in windows 11

image.png.f85469e9b5518bc4e1d6ea7a842d5682.png

Link to comment
https://www.neowin.net/forum/topic/1429399-display-connection-might-be-limited/
Share on other sites
Grand Master

adrynalyne

Posted
Posted (edited)
On 21/05/2023 at 08:43, Mindovermaster said:

You keep having problems over problems.. :laugh: 

I think it's just a Windows 11 bug, imo.. If it works fine, why?

This is how rumors start. Go ahead and explain why it’s a Windows 11 bug. 

On 21/05/2023 at 08:27, neufuse said:

I get this in windows 11 but not in windows 10...

USB popup saying "Display connection might be limited. Make sure the DisplayPort device you're connecting to is supported by your PC."

my Dell U2720QM Monitor is connected via standard display port. Yet I get this message when I want to use the USB Ports on my monitor. I have the USB Hub in the monitor connected back to the system via USB-C, which is the only way the uplink port goes back.

Why would my display connection be limited? nothing is limiting it, and there is no video over USB-C set up, thunderbolt is turned off on in the BIOS config as I am powering this monitor over a nVIDIA RTX 3080 card and have no need for thunderbolt either.

What am I missing? I want to use the monitors side USB  ports and use the display port connection to the dedicated card and not get this warning every time I start up in windows 11

image.png.f85469e9b5518bc4e1d6ea7a842d5682.png

Have you tried another cable to connect your monitor?

Grand Master

Steven P. Administrators

Posted
  • Administrators
Posted

I used to have a 27" G Sync Dell and that had a USB hub too, but it used the following cable:

image.png

This is what a USB uplink usually looks like. I haven't seen one with a Type C connector, Type C is usually used for Thunderbolt/DisplayPort connections.

I am using one right now from DisplayPort to Type C on a mini PC. You will find that Type C ports will also have a DisplayPort symbol on it.

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
On 21/05/2023 at 13:44, adrynalyne said:

This is how rumors start. Go ahead and explain why it’s a Windows 11 bug. 

Explain why it isn't..

"Think" means, I'm not sure, just my opinion on the matter. If it's wrong, it's wrong.

  • hellowalkman
  • Like 1
Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
On 21/05/2023 at 13:57, Steven P. said:

image.jpeg

Make sure the Type C connector is in the right port. You want to make sure the USB Hub connection isn;t in the one with the DisplayPort symbol. (use the one with the red arrow).

Good catch. I forgot about that.. I know they use different DP ports for usual PC connection, and daisy chain.

Grand Master

adrynalyne

Posted
Posted
On 21/05/2023 at 11:55, Mindovermaster said:

Explain why it isn't..

"Think" means, I'm not sure, just my opinion on the matter. If it's wrong, it's wrong.

I know what I means but clearly you cannot even back up your own opinion. 

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted
On 21/05/2023 at 14:57, Steven P. said:

image.jpeg

Make sure the Type C connector is in the right port. You want to make sure the USB Hub connection isn't in the one with the DisplayPort symbol. (use the one with the red arrow).

yeah that's which one it is plugged into the upstream usb-c port, yet it keeps thinking its trying to use thunderbolt

On 21/05/2023 at 11:43, Mindovermaster said:

You keep having problems over problems.. :laugh: 

I think it's just a Windows 11 bug, imo.. If it works fine, why?

this is a completely different system too with a new monitor

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted (edited)
On 21/05/2023 at 14:57, Steven P. said:

image.jpeg

Make sure the Type C connector is in the right port. You want to make sure the USB Hub connection isn't in the one with the DisplayPort symbol. (use the one with the red arrow).

image.thumb.png.7406c2f1779dc3e67bfbd58e83e4d40a.png

According to the manual the upstream USB-C port is also display port, there is no independent upsteam USB port, the two USB3 downstream ports are not upstream. The input on the screen is set to Display Port not USB Type-C for the video. Windows seems to think that the USB-C even though DisplayPort on it is turned off in the bios is still a display port via USB-C

 

Contributor

FizzyChickenBroth

Posted
Posted (edited)

Check to see if your USB-C setting is prioritized for data or resolution. I have a similar monitor and noticed my internet speeds weren't maxing out at 1Gbps and changed it from max graphics to max data.  My graphics didn't seem to take any hit but my ethernet capped out after the change. 

image.thumb.png.74984558d30373f8bfac07271c7a6bf8.png

 

Chances are you can probably safely ignore that message if you're getting your intended resolution. The warning may go away if you happen to have it set to max data and toggle to max resolution instead. 

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted (edited)
On 21/05/2023 at 18:08, FizzyChickenBroth said:

Check to see if your USB-C setting is prioritized for data or resolution. I have a similar monitor and noticed my internet speeds weren't maxing out at 1Gbps and changed it from max graphics to max data.  My graphics didn't seem to take any hit but my ethernet capped out after the change. 

image.thumb.png.74984558d30373f8bfac07271c7a6bf8.png

 

Chances are you can probably safely ignore that message if you're getting your intended resolution. The warning may go away if you happen to have it set to max data and toggle to max resolution instead. 

graphics aren't going through the USB-C cable, they are going through a DP cable, so that wouldn't affect resolution, but the USB-C port is set to data but that shouldn't matter as the motherboard's bios is set to disable video on USB-C since I'm not using it for that 

right now nothing is affected by it, just an annoying windows pop up randomly warning me about it, which I can't seem to stop even with notifications for it turned off

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted
On 21/05/2023 at 14:51, Steven P. said:

I used to have a 27" G Sync Dell and that had a USB hub too, but it used the following cable:

image.png

This is what a USB uplink usually looks like. I haven't seen one with a Type C connector, Type C is usually used for Thunderbolt/DisplayPort connections.

I am using one right now from DisplayPort to Type C on a mini PC. You will find that Type C ports will also have a DisplayPort symbol on it.

this monitor has no type b or type b 3 connectors, only USB-C upstream ports and 2 USB 3 Type A downstream ports on the bottom and 1 Type A / 1 Type C downstream on the side

Grand Master

goretsky Supervisor

Posted
  • Supervisor
Posted

Hello,

It sounds like the monitor is trying to negotiate a DisplayLink connection to the computer with the Nvidia RTX 3080 video card in it over the computer's USB-C port.  That's just a guess on my part, though, since I haven't seen any mention of the brand and model of computer and do not know what its capabilities may or may not be.

 

Regards,

Aryeh Goretsky
 

Grand Master

Mindovermaster Global Moderator

Posted
  • Global Moderator
Posted
On 23/05/2023 at 13:42, neufuse said:

Dell support - "This is a normal message when using the USB ports on this monitor inside of Windows 10 or 11"

ok....

Umm.. Yeah.. Just another way of saying they don't know either..

Grand Master

neufuse Veteran

Posted
  • Author
  • Veteran
Posted (edited)
On 23/05/2023 at 17:11, Mindovermaster said:

Umm.. Yeah.. Just another way of saying they don't know either..

yeah, that's basically what I expected from dell support too... but had to ask just incase there was something they knew... wish I knew how to stop this, not hurting anything just annoying how it randomly pops up warning about it.. and it's only on this monitor, I have other USB-C capable dell monitors that are larger 4K displays and they don't do this

Edited by neufuse
  • Mindovermaster
  • Sad 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • AMD 9070XT

      By cooky560 · Posted

      Well I've done a grand total of nothing, and it now clocks between 2010mhz and 1995mhz (stock is 1710mhz) and hovers around 80c, warmer than it used to, but tolerable clocks seem to have returned. Thanks for all the advice on this thread. Will review the evidence and make a choice.
    • Microsoft hides these secret Windows 11 performance boost settings available on every PC

      By ExPat · Posted

      Looking forward to the test results.
    • Audacious 4.6.1

      By Copernic · Posted

      Audacious 4.6.1 by Razvan Serea Audacious is a lightweight, open-source audio player that emphasizes simplicity, performance, and sound quality. Designed for Linux, Windows, and macOS, it supports a wide range of audio formats, internet radio streaming, and playlist management. Users can customize the interface with Winamp-style skins or modern themes, making it flexible for different preferences. Audacious also includes an equalizer, advanced audio effects, and a plugin system for extending functionality. Its low resource usage makes it especially suitable for older computers or users who value efficiency without sacrificing playback quality. Audacious key features: High audio quality – delivers clean, gapless playback with minimal distortion. Wide format support – plays MP3, FLAC, Ogg Vorbis, AAC, WAV, WMA, and more. Internet radio streaming – supports Shoutcast, Icecast, and other online streams. Winamp skin support – classic, nostalgic look for users who prefer the old-school style. Modern GTK-based interface – clean, simple UI with a more modern feel. Customizable themes – change appearance through skins and themes. Advanced playlist management – organize, save, and edit playlists with ease. Equalizer – fine-tune audio output with a built-in graphical equalizer. Audio effects – built-in DSP options like crossfade, replay gain, and more. Plugin system – extend functionality with additional components. File metadata support – displays and organizes music based on tags. Drag-and-drop support – quickly add songs or playlists. Global hotkey support – control playback without switching windows. Bit-perfect output modes – bypass system mixers for pure audio output. ReplayGain support – normalizes track loudness automatically. Cue sheet support – play entire albums from a single audio file with .cue. MPRIS2 integration – integrates with Linux desktop environments for media controls. Advanced resampling options – adjust playback quality with different resampler settings. Gapless playback – seamless transition between tracks encoded properly. Crossfade plugin – blend one song into the next smoothly. Last.fm scrobbling plugin – track listening history online. Remote control support – control Audacious via command-line or scripts. Lyrics plugin – display song lyrics if available. Alarm / timer plugin – start or stop playback at set times. SOX resampler plugin – high-quality resampling for audiophiles. Spectrum analyzer / visualization plugins – visual feedback while playing music. Headphone crossfeed effect – simulates speaker listening for headphones. Customizable buffer size – tweak latency and playback smoothness. Audacious 4.6.1 changelog: Use XDG cache dir to store temporary files (#1817) Accept embedded lyrics in more cases (#1818) Bump .so and plugin ABI versions retrospectively (#1819) Include Georgian translation (#1820) Fix build on systems using musl instead of glibc (#1823) Download: Audacious 4.6.1 | 48.2 MB (Open Source) Download: Portable Audacious 4.6.1 | 69.8 MB View: Audacious Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Politically funny images of the World

      By +DoctorD · Posted

    • Can't access the forum on mobile

      By Steven P. · Posted

      I really wonder if this has to do with the built in VPN or "private DNS" of browsers that trip up legal requirements like cookie consent and Cloudflare (to avoid all the botnet attacks we get). And BTW some botnets still manage to get past Cloudflare, we are constantly having to tweak it to block malicious traffic that ultimately cause a DDoS.

  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      197
    3. 3
      PsYcHoKiLLa
      142
    4. 4
      ATLien_0
      89
    5. 5
      Steven P.
      80
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!