Sleep tracking completely broken on Galaxy Watch6


Recommended Posts

Screenshot_20231229_162633_Samsung Health.jpgScreenshot_20231229_162643_Samsung Health.jpg

My Watch thinks I had two sleep sessions today while I was downstairs on the treadmill or sitting at my desk working

Screenshot_20231229_162800_Samsung Health.jpg

1,178 steps were recorded between 10:00 and 10:30 but apparently I was asleep in my bed from 10:21am

Really fed up with this watch, I bought it specifically for sleep tracking (because I wake up tired a lot) and all it has managed to do is add stress through the crappy or non existent reporting

Screenshot_20231229_163349_Samsung Health.jpg

It typically only records a couple of hours sleep a night. On the 24th and 26th I was offered to enter sleep data manually, which more or less actually reflected the time I was in bed and asleep, but it doesn't show any sleep stages or anything, just the amount of time I agreed I was asleep for.

I've looked all over and tried all of the advice

  • I wear my watch snug and "two fingers" above the wrist bone
  • I wear my Watch6 "snug"
  • I purchased the fabric band, because Samsung says that is better for sleeping
  • I tried wearing it round the other way so the watch face faces out on my inner wrist
  • I tried wearing it on my ankle 
  • I tried restarting the watch
  • I tried unlinking Sleep mode with my Galaxy S23 Ultra
  • I tried factory resetting (I relinked Sleep mode with my phone after realizing this did not work)
  • I tried deleting Samsung Health app data and cache

For some people it either works flawlessly,. or like mine, completely useless.

One thing I've noticed for the past two nights is that my Watch6 requires a PIN when I wake up, this should only happen if I take my Watch off and put it back on (it is a requirement for Google Wallet) but I do not consciously take off my Watch at night, and it is too snug to accidentally register as being taken off.

Anyone have any ideas?

I bought an Oura Ring and it's awesome, especially for sleep tracking. Much more comfortable than wearinga watch too. Doesn't do activity tracking quite as well as a watch but it's decent.

Yep, it's a very long standing issue with the Galaxy Watches, I have the exact same issue with my Watch 5.

 

Weirdly, with my Galaxy Fit it worked perfectly immediately before I switched to the Watch 5 - I could fall asleep in the afternoon in the front room chair and it would record it, but the Watch 5 couldn't detect it.

On 29/12/2023 at 19:54, Fezmid said:

I bought an Oura Ring and it's awesome, especially for sleep tracking. Much more comfortable than wearinga watch too. Doesn't do activity tracking quite as well as a watch but it's decent.

Samsung is supposedly coming with a ring, it is rumored to cost $300+ too. So I am holding my breath for that announcement at CES, or otherwise MWC Barcelona at the end of February.

I would rather keep my tracked Health data with one provider (Samsung in this case) also because the Oura Ring doesn't work with Samsung Health.

I might even end up selling my GW6 Classic if the ring comes to anything. I have found steps tracking is pretty accurate with my phone too (detecting leg falls as steps). I do half an hour sessions on the treadmill at 5.5km/h which ends up being roughly 3200 steps and my Watch (on my ankle) or phone in my pocket pretty much record the same amount. 

Tonight it recorded two stages. I did not get up or wake up in between and I manually turned off Sleep at 09:20

Screenshot_20231230_093903_Samsung Health.jpgScreenshot_20231230_093848_Samsung Health.jpg

I manually turned it off, but Sleep tracking stopped almost two and a half hours earlier, okay... ?

Workaround is to use another sleep app like Sleep As Android, installed on both the watch and phone. Within that you can enable export to Google Fit and Samsung Health. The app will record your heart rate from the watch, while the phone app can record your snoring.

Unfortunately the scores and recommendations won't update based on the exported data, but at least you will have more accurate data in Samsung Health.

On 29/12/2023 at 15:44, Steven P. said:

My Watch thinks I had two sleep sessions today while I was downstairs on the treadmill or sitting at my desk working

I can't explain the treadmill, but I've fallen asleep plenty of times while at my desk writing out monotonous reports...

Back to the subject, I didn't realise I was so fortunate. I've had my Galaxy Watch for a few years now and never had any major issues that I can think of. If so many people have reported a similar situation, has Samsung acknowledged the issue?

On 31/12/2023 at 10:15, Nick H. said:

If so many people have reported a similar situation, has Samsung acknowledged the issue?

They haven't acknowledged it. It either works great for people or terribly like my experience.

Before this Watch I used the original Galaxy Watch 46mm, and until the most recent major updates to Samsung Health with the new icons and whatever, the Tizen version of my original worked great, also with Sleep tracking, but directly after the update it had the same performance as the Watch6.

Other tracking sensors appear to be fine, like steps, stress and heart rate and so forth.. it is just Sleep that is so broken for me.

Last night:

image.jpeg

Time in bed 0:148 (it was actually 01:10) until 03:33 (it was actually 09:20)

So my Watch thinks I've been out of bed since 03:33am ....

Looking at my heart rate measurement, it recorded between 51 -106bpm between 03:30 - 03:57 that must have been the time I woke up and went to the bathroom to blow my nose, because for the rest of the night it's under 90. so one explanation is that it stops tracking when I get out of bed to go to the bathroom or whatever. I guess it's extremely dumb in that it sometimes can't detect that I went back to sleep again within my set Sleep schedule? 

There may not be much for you to do I'm afraid, sleep tracking through wearables is highly dependent on the sensors and algorithms used (heart rate monitoring too, but the topic is on sleep), the data presented in these two videos should give you some insight on how your Watch6 fairs, even if it is not a formal study with several subjects (there are videos for the Classic too, if yours is one of those):

 


I do not think people should take biometric reports out of devices like these as accurate, they could be, but they are more like general trends or "in the ballpark of", except for a couple of them. Bands (bracelets), which are cheaper and more widespread, are also less reliable overall, even popular ones. Apple Watches on the other hand tend to be more reliable, but they do require iPhones.

On 31/12/2023 at 13:21, aphanic said:

I do not think people should take biometric reports out of devices like these as accurate, they could be, but they are more like general trends or "in the ballpark of", except for a couple of them. Bands (bracelets), which are cheaper and more widespread, are also less reliable overall, even popular ones. Apple Watches on the other hand tend to be more reliable, but they do require iPhones.

Yeah I am aware that Apple's sleep tracking is miles better through what I've read online and someone I know who has an Apple Watch.

What bothers me is that Samsung promotes it heavily, but it is sub-par in my experience, well on Android WearOS it is.. it used to be fine on Tizen.

  • 4 weeks later...

Well I give up. I have now put the Watch6 up for repair, they will pick it up tomorrow.

I've tried so many different things over the last month and a half since I got it, and read so many different topics, nothing has helped. I am starting to suspect that something is up with the sensors.
 
Here is what I have tried:
  • Cleaned sensors several times with 99.9% isopropanol with lint-free cloth (glasses cleaning cloth)
  • Tried default Silicon band, Galaxy Watch6 Fabric Band (M/L) tight and watch face pointed inward, makes no difference
  • Factory reset several times (but restored from Backup each time)
  • Heart rate monitor is on Continuous
  • All privacy and Sensors are set to "allowed" for Samsung Health and Health Platform
    • one must go deep menu diving in a lot of Privacy related permissions!
  • Sleep mode schedule set (between 01:00 and 09:00) on phone and watch
    • because for some strange reason they are completely separate from each other
  • The entire month of January measured just an average of 1-2 hours each night
  • Nothing measured in the past 3 nights, was asked to enter manually
  • It doesn't matter if I take my phone to bed or not (sleep tracking same result)
  • I have been taking my phone to bed with me for the last two weeks, but this has not helped
  • "Snore detection" is on or off, makes no difference in the result
Below are the averages, as can be seen at most 1-2 hours a night was tracked it was like that before the Jan 9 as well:
 
Screenshot_20240130_094204_Samsung Health.jpgScreenshot_20240130_094148_Samsung Health.jpgScreenshot_20240130_094134_Samsung Health.jpg
 
28th, 29th and today I was asked to enter manually.
 
Only difference is I also tried Sleep Cycle app last couple of weeks, but people who have used it said that Sleep Cycle actually fixed Sleep Tracking for them. For me it appears to have gotten worse.
  • 2 weeks later...

I doubt it's the sensors. As I mentioned before, Sleep As Android works fine. In fact I leave it, I do not turn it on, and Sleep As Android knows when I fall asleep and turns the phone app on automatically. It picks up my Sleep patterns, and seems to work fine.

  • 2 months later...

Hi, it's me again! 🙋‍♂️

Finally after trying since August 2023 with different Galaxy Watch models (original 2018 Classic, 5, 4 and now Watch6 Classic) I now have a "sleep animal" for the first time.

Screenshot_20240507_153118_Samsung Health.jpg

But I can only get sleep to track when I wear it on my ankle at night. If I wear it on my wrist, it only tracks between 1-2 hours.

I am the first to admit I do not get great or enough sleep. I am usually tired in the afternoon and will sometimes have an hour nap.

On 07/05/2024 at 16:50, Steven P. said:

But I can only get sleep to track when I wear it on my ankle at night. If I wear it on my wrist, it only tracks between 1-2 hours.

I am the first to admit I do not get great or enough sleep. I am usually tired in the afternoon and will sometimes have an hour nap.

Yeah man, I usually get 8-9 hours each night but even then I occasionally have a nap around 1400. I'd die following your sleep rota.:laugh:

I was about to ask how the heck you get it on your ankle, but I guess you've got a strap that completely undoes?

I don't get told what kind of animal I relate to with my sleeping habits. I would assume a hibernating bear or something. World War 3 could be happening outside my window and I wouldn't know. :p

On 07/05/2024 at 18:01, Nick H. said:

I was about to ask how the heck you get it on your ankle, but I guess you've got a strap that completely undoes?

Yeah this is what I have (link). Through sheer luck the textile end of the band can relatively easily be pulled through the watch clasp loop so I can attach it round my ankle. As a result there's no plastic or metal to break or wear/get bent out of shape.

I also discovered some things I have not tried while I was doing some searching online about ankle wearing and sleep tracking

  • Disable Sleep Mode schedule syncing to watch (well i have tried this before, but not the following:)
    • But also, clear the automatic Sleep Mode schedule on the Watch and disable it
    • But also, disable Sleep Mode schedule on the phone, because this sets (certain conditions, but in my case) Do Not Disturb on the Watch
  • Then: Turn on Sleep Mode manually on the Watch (or let the Watch detect it)
  • Set Always on Display schedule to turn off between 01:00-09:00 on the phone
  • In WearOS enable "Sync Do not Disturb with Phone" - this allows you to set the conditions you used to have in the phone's Sleep Mode if you take it to bed with you.

What we're trying to achieve here, is not have the Phone override a Watch setting for sleep tracking.

It seems like thanks to Samsung's crappy settings soup, the Phone or the Watch override each other depending on the setting.

For example, in Sleep Mode on the Phone, I also have "enable Do not Disturb" on, but my Watch automatically sets Do Not Disturb on my phone when it enters Sleep mode, so two settings, which one cancelled the other out?

Same with schedule when it is synced, according to some reddit comments, the Sleep Mode schedule Sync from the phone cancels out the schedule set on the watch (like, it overrides it).

So instead, now I am letting my Watch set Do not Disturb on my phone, and I am manually setting a schedule for AoD instead of having the phone's Sleep Mode turn off the screen.

Samsung made it far more difficult and complicated than it needs to be, especially so after they buried Bedtime Mode behind an additional "Modes" menu on the Watch with an update at the end of last year.

On 07/05/2024 at 12:51, Steven P. said:

Yeah this is what I have (link). Through sheer luck the textile end of the band can relatively easily be pulled through the watch clasp loop so I can attach it round my ankle. As a result there's no plastic or metal to break or wear/get bent out of shape.

I also discovered some things I have not tried while I was doing some searching online about ankle wearing and sleep tracking

  • Disable Sleep Mode schedule syncing to watch (well i have tried this before, but not the following:)
    • But also, clear the automatic Sleep Mode schedule on the Watch and disable it
    • But also, disable Sleep Mode schedule on the phone, because this sets (certain conditions, but in my case) Do Not Disturb on the Watch
  • Then: Turn on Sleep Mode manually on the Watch (or let the Watch detect it)
  • Set Always on Display schedule to turn off between 01:00-09:00 on the phone
  • In WearOS enable "Sync Do not Disturb with Phone" - this allows you to set the conditions you used to have in the phone's Sleep Mode if you take it to bed with you.

What we're trying to achieve here, is not have the Phone override a Watch setting for sleep tracking.

It seems like thanks to Samsung's crappy settings soup, the Phone or the Watch override each other depending on the setting.

For example, in Sleep Mode on the Phone, I also have "enable Do not Disturb" on, but my Watch automatically sets Do Not Disturb on my phone when it enters Sleep mode, so two settings, which one cancelled the other out?

Same with schedule when it is synced, according to some reddit comments, the Sleep Mode schedule Sync from the phone cancels out the schedule set on the watch (like, it overrides it).

So instead, now I am letting my Watch set Do not Disturb on my phone, and I am manually setting a schedule for AoD instead of having the phone's Sleep Mode turn off the screen.

Samsung made it far more difficult and complicated than it needs to be, especially so after they buried Bedtime Mode behind an additional "Modes" menu on the Watch with an update at the end of last year.

My Galaxy Watch 4 worked great for nearly two years until a couple months ago I got a wearOS update that just brought this thing to its knees.

It takes anywhere between 5 seconds and never for it to update how many steps I have on the step counter tile. Sometimes it just goes back to sleep before finally showing me how many steps I got. My watch has the most random lag spikes, and I have most of what it does turned off. The only thing on constantly is the heart rate tracker and bluetooth.

It was a significant enough change in usability that I'm no longer interested in Samsung's watches if they're going to nerf the usability after two years on a watch that cost hundreds of dollars.

 

That said if anyone has recommendations for a watch that does heart rate (don't need analytics, just maybe the range for the day), steps, a timer/alarm, and text notifications, I'd love to hear em.

On 08/05/2024 at 14:44, satukoro said:

My Galaxy Watch 4 worked great for nearly two years until a couple months ago I got a wearOS update that just brought this thing to its knees.

My Tizen-based Galaxy Watch Classic 46mm was accurate until they did the big Samsung Health update at the end of summer last year.

Then I bought a second hand Galaxy Watch 4 Classic that had great battery life (3+ days) and great sleep tracking until a WearOS update completely broke the sleep tracking.

But I like the look of the Galaxy Watch Classic and the dial bezel.

 

On 08/05/2024 at 14:44, satukoro said:

That said if anyone has recommendations for a watch that does heart rate (don't need analytics, just maybe the range for the day), steps, a timer/alarm, and text notifications, I'd love to hear em.

Fitbit and Apple Watches are the most reliable that I have heard about in my search online to try and fix the issues I've been having.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Cloud Security Fundamentals eBook —was $131.95, now free to download by Steven Parker Claim your complimentary copy (worth $131.95) of "Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms" for free, before the offer ends on July 1. Description In Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms, cybersecurity leader and educator, Jason Edwards, delivers a comprehensive guide to safeguarding data, applications, and infrastructure in the cloud. The author offers a complete walkthrough of cloud security, moving from foundational concepts to advanced, forward-looking practices. The book is filled with practical examples, hands-on guidance, and lessons drawn from real-world cloud security incidents and breaches. It equips readers with the tools and knowledge they need to defend against threats in cloud environments and how to understand coming developments in cloud technology that will impact organizations in all industries. Inside the book: A thorough introduction to cloud-native and advanced security practices for contemporary firms A chapter on relevant cloud security certifications and professional growth advice Practical discussions of foundational concepts in cloud security, including IAM, Zero Trust, and DevSecOps Complete treatments of advanced cloud security themes, like leadership strategies, operational best practices, and techniques for dealing with common and emerging threats Perfect for cloud security professionals, IT managers, and DevOps professionals, Cloud Security Fundamentals will also benefit system administrators, compliance and risk officers, consultants, auditors, and technology students in a variety of fields who require a foundational understanding of cloud security concepts. How to download for free Please ensure you read the terms and conditions to claim this offer. Complete and verifiable information is required in order to receive this free offer. If you have previously made use of these offers, you will not need to re-register. Was $131.95, but is now FREE | Below link offer expires on July 1. Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms The below offers are also available for free in exchange for your (work) email: The Vibe Coding Playbook: Building Your Tech Business with AI ($35 Value) FREE - Expires 6/23 The Persuasion Engine: How Any Business Can Use AI-Powered Neuromarketing to Understand and Win Customers ($28 Value) FREE - Expires 6/24 How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy ($28 Value) FREE - Expires 6/30 Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms ($131.95 Value) FREE - Expires 7/1 The Complete Free AI Learning: Master ChatGPT, Claude, Gemini & More ($21 Value) FREE How to Build an AI Design Workflow with Gamma ($21 Value) FREE The Ultimate Linux Newbie Guide – Featured Free content Python Notes for Professionals – Featured Free content Learn Linux in 5 Days – Featured Free content Quick Reference Guide for Cybersecurity – Featured Free content We post these because we earn commission on each lead so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. Other ways to support Neowin The above deal not doing it for you, but still want to help? Check out the links below. Check out our partner software in the Neowin Store Buy a T-shirt at Neowin's Threadsquad Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: An account at Neowin Deals is required to participate in any deals powered by our affiliate, StackCommerce. For a full description of StackCommerce's privacy guidelines, go here. Neowin benefits from shared revenue of each sale made through the branded deals site.
    • TerraMaster F4-425 Pro review: an octa-core Intel NAS that ships with AI (OpenClaw) by Steven Parker It has been a while since I reviewed a TerraMaster NAS, but the company reached out to me asking if I was willing to test the F4-425 Pro, which goes on sale today. It is an upgrade on the F4-425 Plus, which I reviewed back in October 2025 What you need to know is that it basically follows the design principles of the four-bay F4-425 series, with its all-metal exterior. Here are the most important specifications: TerraMaster F4-425 Pro CPU Intel Core N350 (8x E Cores/Threads, Max burst up to 3.9 GHz) Intel Core N305 (4x E Cores/Threads, Max burst up to 3.8 GHz) TDP: 7W / 9W (Base) Graphics Intel UHD Graphics 32 EUs (1.35 GHz) Intel UHD Graphics 24 EUs (1.25 GHz) Memory 1x slot 16 GB DDR5 4800MT/s non ECC SODIMM (Max 32 GB) 1x slot 8 GB DDR5 4800MT/s non ECC SODIMM (Max 32 GB) Disk Capacity 120 TB (30 TB x 4) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Network 2x RJ-45 5 GbE Internal storage 3x M.2 2280 NVMe Slot (PCIe 3.0 x1) Bootloader 2Gbit 256 GB NAND Flash card (MX30LF2G28AD) USB port (internal) USB Ports 1x Type-C 3.2 Gen 2 (10Gbps) 3x Type-A 3.2 Gen 2 (10Gbps) HDMI 1x (HDMI) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Size (H/W/D) 219 x 181 x 150 mm Weight 2.9 kg System Fan 150 x181 x 219 mm Power 90W, 100V - 240V AC, 50/60 Hz, Single frequency Power consumption (HDDs) 45W (4x 4TB ST4000VN008 in read/write state) 14W (4x 4TB ST4000VN008 in hibernation) Noise Level: 20.9 dB(A) Using 4 SATA HDDs/SSDs in standby mode; Test environment noise: 17.3dB(A); Test distance: 1m Warranty 2 Years OS TOS 7.0.0706 (Beta) MSRP £639.99, $699.99, €739.99 / £739.99, $799.99, €839.99 As you can see above, there are two variants of the F4-425 Pro releasing today. The lesser variant has the slightly weaker N305 CPU and iGP, and 8 GB less RAM, although it also costs $100 less than the top variant we are testing today. In addition, these new F4-425 Pros are shipped with the as-yet-unreleased TOS 7 beta. So what is TOS 7 exactly? During the device initialization, you are warned not to use it in a production environment, which we'll get into later. My contact told me that TOS 7 exits beta today, June 23 with version 7.0.0746. The clear difference with the F4-425 Plus is that it contains the more powerful N350 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, LPDDR5 (4800), DDR5 and DDR4, and a max TDP of just 7W. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Alder Lake-N series that sits just below the top N355 offering, albeit with an impressive TDP (less than the N355 and N305) for the features it offers. It is designed for low- powered systems and entry-level laptops. As before, we are seeing another NAS with an acceptable, if not great, amount of RAM. It should be noted that the F4-425 Pro only has one SODIMM slot, so if you are planning to upgrade the already 16GB included in this NAS, it will have to be on one module of Single Rank DDR5. As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. Before we dive in, you can view the different SKUs released so far since the 2025 series launched for Home and SMB users, with the most important specifications listed along with the MSRP listed below: SKU CPU Cores Memory Link Price F2-425 Intel N5095 4 4 GB DDR4 2.5 GbE x1 $249.99 F4-425 Intel N5095 4 4 GB DDR4 2.5 GbE x1 $369.99 F2-425 Plus Intel Core N150 4 8 GB DDR5 5 GbE x 2 $399.99 F4-425 Plus Intel Core N150 4 16 GB DDR5 5 GbE x 2 $569.99 F4-425 Pro Intel Core N305 8 8 GB DDR5 5 GbE x 2 $699.99 F4-425 Pro Intel Core N350 8 16 GB DDR5 5 GbE x 2 $799.99 The F2 in the product name means two 3.5-inch HDD bays, where F4 is four 2.5-inch bays. First impressions Like with the F8 SSD Plus packaging, the F4-425 Pro is using the upgraded box materials, which certainly look better than a plain cream colored box with TERRAMASTER stamped on the sides. The box gives off a premium feel and certainly adds a positive vibe to first impressions. In the box F4-425 Pro TNAS device Power adapter LAN cable (CAT 6) Quick guide [full online guide] Limited warranty notice Screws (for HDD bays) Stickers 2x rubber feet (spares) Design As has become kind of common with TerraMaster, certainly in the last three years, the 2025 F2- and F4-series have received a makeover that really adds to the premium feel of the NAS. Gone are the plastic shells, now replaced with an aluminum outer shell, with the front and back retaining the textured black plastic we saw on the 2024 models. Some key differences from the 2024 series include placing the power button back on the front, along with the addition of a Type A USB port. It's not much bigger or heavier either; in fact, it weighs 500 grams less than the F4-424 Pro. It's slightly shorter in height and depth (length), but only by a few millimeters. The front and back do retain a similar style to the 2024 series. On the front, you just have your four bays along with LED indicators for the HDDs and power. The welcomed change is having a USB port on the front for quick access, should you need to back up a USB drive, for example. Around the back, from top to bottom, you have a reset pin hole, an HDMI port, two 5 GbE Ethernet ports, two USB 3.2 Gen 2 (10 Gbps) Type A ports with a Type-C port below them, and a connector for the barrel port power source. Again, there's no Kensington Security Slot present, which is a bit of a shame considering it's a data storage device. Left side Right side On the left and right of the F4-425 Plus, it is completely smooth aluminum with a TERRAMASTER logo printed on both sides. On the bottom, there are some holes to assist ventilation. Unlike with the F4-425 Plus, the rubber feet did come unstuck during the teardown, which was also an issue on the 2023 series. It seems like other customers have lodged complaints about them, as TerraMaster now includes two spare rubber feet in the box, in case any of the preinstalled ones are lost; however, this seems more like a papering over the cracks solution rather than actually fixing the issue with better quality rubber stand-offs. There are also four screws that must be removed in order to access the internals. Teardown Upon removing the four screws, you can slide the device out of its shell to reveal the three NVMe M.2 slots (PCIe 3.0 X1) and single SODIMM slot connector, which is populated with a single 16GB DDR5 4800MT/s module. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $492.99 that TEAMGROUP supplied us with, along with a 250GB 970 Evo Plus that my colleague Chris White sent me by accident and let me keep a few years ago. As I have said in previous reviews, TerraMaster support staff actually encourage installing whatever you want on their devices, and happily, the USB port for the bootloader is now easily accessible should you want to use it for your own flavor of NAS OS, such as TrueNAS, Unraid, or maybe Xpenology. Yes, because TerraMaster has now switched to a 256 GB NAND Flash card (3rd photo above) for the TOS bootloader. This is also replaceable, but you can also simply add a USB bootloader, access the BIOS, and tell the F4-425 Pro to boot from that instead of the Flash card. Unlike earlier iterations of TerraMaster NAS, you don't have to tear this down any further than the four screws on the outer shell in order to be able to access and manage the memory, NVMe slots, and USB bootloader. However, if you need to access the NAND Flash card or CMOS battery, then eight more screws (four on each side) need to be removed in order to take off the rear panel with the 120mm fan, and then the motherboard can be lifted off and removed from the SATA connector PCB. There's also no risk of threading the screw holes, because the four that hold the shell in place are metal on metal, while the screws that hold the rear panel on do screw into plastic. Either way, like last time when I reviewed the F4-425 plus, I was just happier to see larger screws being used. Overall, it follows some great improvements in build quality from the 2024 series and earlier. Setup BIOS The F4-425 Pro includes an Aptio BIOS from American Megatrends [1, 2], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to the USB bootloader so this would still allow you to switch to a USB stick with an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Setup is roughly the same as the F4-425 Plus, along with the new TOS 7 setup dialogs, so there will be no surprises here. Upon connecting to the LAN and booting up, the F4-425 Pro can be reached by navigating to http://tnas.local. If that doesn't work, you can use the local address assigned via DHCP, which you can find using the TNAS PC desktop application, which is essentially a TerraMaster NAS finder. The setup process is pretty straightforward, through a wizard, and in full below: TOS 7 Initialization As you can see, TOS 7 received a new coat of paint, and the initialization requires fewer interactions. Happily, TOS no longer decides to throw all disks into the same Storage Pool; 2.5-inch HDDs are allocated into Storage Pool 1. This is because two of the HDDs are allocated to hold system files. Previously (with TOS 5 and 6), if you pre-installed HDDs and SSDs, they were all placed into Storage Pool 1, even if you did not select the SSDs for inclusion during the onboarding. TOS 7 Setup On first boot, there is a tutorial and some steps to take to harden the TNAS (or not), which includes an immediate update from TOS 7.0.0616 to 7.0.0706, of which the changelog screenshot is also included in the above gallery. It must be noted that the Security Advisor still contains (in my opinion) a pretty major bug in that if you enable SPC and then do the required rebooting, the Security Advisor still says that SPC is disabled. TerraMaster provided the following statement about it: It is disappointing that TOS 7 has been in beta since December, and this OOBE issue is still there. Shutdown option has moved Instead of a Taskbar option to manage the NAS, all of these options have been moved to a "Start panel", initially I didn't see it and my contact had to show me how to power off the F4-425 Pro. To logout, reboot or power off you can find those controls at the top right of the Panel. It is also possible to power off through the TNAS mobile app beta. Storage setup Above, you can see the steps I took to create the Storage Pools and Volumes. I made a second Storage Pool using TRAID on two 4TB MP44Q SSDs (which, in this instance, is similar to RAID 5), and finally, I added the 250GB 970 Evo Plus drive as Hyper Cache on Storage Pool 1 in Balanced mode. Registering If you decide not to lock down the F4-425 Pro in Security Isolation Mode (blocking all external connections), then you could set up a TNAS device ID through the Remote Access setting in the Control Panel (which must be unique). This works in combination with an online TerraMaster account. TOS 7 TNAS Online Creating a TerraMaster account and linking the device online activates the warranty when you provide proof of purchase and the serial number, but it also gives you access through the TNAS mobile app, which allows you to complete certain operationsб including powering off and restarting the NAS remotely. A TNAS mobile update is required to gain access through TOS 7, and this is provided on the TerraMaster website, as it is not yet on Google Play. The app is evolving all the time and has made leaps and bounds since I first started reviewing TerraMaster devices almost three years ago. It is not quite there yet if you are comparing the likes of Synology, which, sadly, a lot of users online do all the time. OpenClaw setup One of the main selling points of the new F4-425 Pro is the inclusion of OpenClaw, with TerraMaster claiming that it is "powered by the world's first AI-native TOS 7 OS, supporting local-first smart workflows and independent data control." However, I immediately ran into problems trying to enable OpenClaw. After waiting 20 minutes at the "Enabling" message of the OpenClaw app following installation, I decided to do some searching online and discovered that it couldn't complete the installation process due to SPC being enabled, which is something TOS 7 immediately recommends to be enabled on first boot. SPC for NAS (TOS 7) is basically the same principle as UAC in Windows; it blocks executables from being launched by non-Super Users. After reaching out to my contact about these issues, I received the following response: Anyway, this only became clear when I closed the OpenClaw app screen and clicked on the OpenClaw icon in the taskbar; that is when I saw the message about disabling SPC. I think, due to the fact that this is a requirement, this should be a prompt during the installation process, not when closing the App Market and then trying to launch OpenClaw. There's also no 'Getting started' guide for people like me who have never used OpenClaw. I tried to add an LLM and discovered the tutorial led nowhere. That's when I started looking around the official TerraMaster forums, and I found a guide that helpfully explains that you won't get anywhere with OpenClaw unless you have a paid plan, which is disappointing because I imagined there would be an option to use a local LLM as I do in SubtitleEdit with Whisper-XXL. In addition, with the marketing imagery on the official site, it says that the OpenClaw feature is "all processed 100% locally for absolute privacy." which led me to believe that I could install a local LLM, not one that required paid tokens. In any case, TerraMaster does not provide guidance for this new feature, which was also a selling point of the F4-425 Pro! My contact also provided clarification about the above points I raised with TerraMaster Since it is not in the scope of the review to add paid services, I'll leave that to the people who are more qualified with OpenClaw. F4-425 Pro Surveillance App TOS also comes with a Surveillance app, which is not installed by default; it can be found in the App Market recommended section. In addition, after installing, it doesn't drop a shortcut on the Desktop or top taskbar, but you can "Send to Desktop" from the App Market listing for the app for a quick way to open it. Adding my Reolink POE doorbell camera was painless. TerraMaster doesn't appear to have a repository of preconfigured cameras; instead, the camera must be added using ONVIF or RTSP. No mobile Surveillance app TerraMaster still doesn't have a dedicated Surveillance app, although from searching online, Surveillance can be used and managed through the TNAS mobile app. I tried this with the updated TNAS mobile app beta in combination with TOS 7 and got a message that Surveillance was "Only accessible through web browser," so I reckon this must be limited to the stable versions of TOS 6 and the mobile app. More quirks In addition, whenever I minimized the Live View window in the browser Surveillance app, the feed appeared to switch to the Low-bandwidth stream, and there was no way to get the High-quality stream back. To get the High-quality stream back, I had to close Live View and then reopen it. Benchmarking A pretty cool feature of the TOS 7 is that it allows you to install directly to the NVMe M.2 SSD. In order to do that, you would have to leave out any HDDs during initialization, and even then, the system partitions are always written to two HDDs when they are eventually added. With three NVMe slots, this also gives an interesting scenario where you could build a TRAID storage Pool for installing all your apps and Docker on, and keep the third for SSD cache on the HDD pool. Limitless options! SATA PCIe 3.0 X1 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 5 GbE hub was well within acceptable ranges. Although the read result on SATA was a little less than with the F4-425 Plus, for some reason, while writes were generally better. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 5GbE connection. Of course, you can also opt to bond the two 5 GbE connections for a bit more umph, but I didn't do that. TOS 7, which, as of testing, is still in Beta, comes with an App Center that has a bunch of handy programs you can install right off the bat, such as Emby, Plex, Docker, as well as in-house Backup and Surveillance solutions. As you can imagine, any media streaming services you would want to host off the F4-425 Pro will work great, thanks to the Intel Core N350 CPU and its 16 GB of DDR5 memory. Accessing from mobile is only possible if Security Isolation Mode is disabled, which can put your NAS at risk from external sources, so there was no way to access it from the TNAS Mobile app. It's also quiet. I had this sat next to my computer on my work desk for the past week, and I did wonder if the noise I was accustomed to with NAS devices would annoy me, but all I could hear was a soft whirring of the rear fan (which was a little annoying) when the disks were not actively copying or reading data. Conclusion So what have I learned? Unfortunately, this release raises a few important questions and concerns that I feel haven't been adequately addressed. What I didn't like Our variant shipped with TOS 7 beta, and it's advised not to use it in a production environment. I feel that's a bit limiting on an $800 device. The mobile app is also still in beta and does not support some of the first-party apps, like Surveillance, and it still has quite a few bugs. I am a bit confused about the OpenClaw marketing along with the F4-425 Pro. I feel like that if it's going to be a main selling point, then offer official guidance on how to get started with it. TerraMaster recommends enabling SPC, but then markets the NAS for use with OpenClaw, which requires disabling SPC to be able to use it, opening up genuine security concerns for the NAS; and that's before you get into the security concerns of OpenClaw itself. Of course, the above issues won't be a problem if you decide to install something else on it, or even go back to the stable TOS 6. I wish TerraMaster had just given TOS 7 as opt-in rather than shipping with it. TOS 7 has been available as a preview since December 2025 (so well before my last TerraMaster review), and according to a thread on Reddit where a user shared a screenshot from the TerraMaster Facebook page, it is scheduled to launch today, June 23, but there's nothing about that in the TerraMaster news blog. My contact confirmed over email that TOS 7 exits beta today. The rubber feet also deserve a mention as they continue to be a problem, with them coming unstuck the moment you shift the F4-425 Pro anywhere on your desk. What I liked What it comes down to, though, aside from what I already mentioned, you are still getting a quality, affordable device here, so recommending it will depend on the individual's use case. If you're just looking for a relatively small NAS device to manage virtual machines on, backup your files, and take care of your home theater streaming, then it is a great device that will certainly futureproof you for some time. It provides good performance, takes up little space, and is, on the whole, very quiet. Four bays afford proper redundancy using TRAID or RAID 5, and you can even expand on storage capacity by adding the 2-bay D5, or 4-bay D8 Hybrid DAS over a USB 3.2 (10Gbps) link. Considering the 2024 releases were more about power, with the likes of an Intel Core i5-1235U high-end laptop CPU under the hood, I asked my contact last time if we could expect more of the same in higher-end models and was told: It makes a lot of sense to use Intel's N350 chip inside a NAS; it is more than capable of doing what the F4-425 Pro is intended for, media streaming and backup. The only downside is still the clear lack of community and even staff support on the official forums. In the past, I have had topics go unanswered for days, or there would be generic-type "we've noted this and passed it onto our developer team" type responses. Along with the other things I mentioned, it all ends up costing it a couple of points. If you are comfortable with the command line, Docker, and setting up TrueNAS or Unraid, you'll be fine. You can do great things with this hardware. In TOS, the apps are a bit lacking, and things don't always work as expected.\ AI NAS?! What has become clear to me this year is that we are going to start seeing all kinds of "AI NAS" come to market, and while that might be good for us consumers, be diligent and research these claims. Although the F4-425 Pro technically comes with AI, it is really using a cloud service that is externally sourced off-device through the third party OpenClaw app. My colleague did review a newcomer to the NAS space earlier this year, and it includes a local AI assistant inside the Zettlab D4 NAS, and they do not even use AI in the product name, check out Chris' review here. Where to buy and a discount coupon However, it does not change the fact that this is truly a great entry-level home media-class NAS that you can buy right now. TerraMaster is having a 20% off launch discount, plus you can also still apply our unique 10% off coupon on checkout, which only works on the official website. So here is a breakdown of the pricing that is only valid on the official TerraMaster website. TerraMaster F4-425 Pro (N350) + 20% discount + 10% coupon = $575.99 TerraMaster F4-425 Pro (N305) + 20% discount + 10% coupon = $503.99 TerraMaster F4-425 Pro (N350) + 20% discount + 10% coupon = £525.59 TerraMaster F4-425 Pro (N305) + 20% discount + 10% coupon = £460.79 Use NEOWIN coupon code during checkout for 10% discount Over on Amazon US and UK, the F4-425 Pro also gets a 20% launch discount, but here, the above 10% coupon cannot be applied. TerraMaster F4-425 Pro (N350) for $639.99 at Amazon US (was $799.99) TerraMaster F4-425 Pro (N305) for $559.99 at Amazon US (was $699.99) TerraMaster F4-425 Pro (N350) for £583.99 at Amazon UK (was £729.99) TerraMaster F4-425 Pro (N305) for £511.99 at Amazon UK (was £639.99) As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • well you can add a GPU for around $500, that's still around the price of Steam Machine but overall significantly better in performance.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      463
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      112
    4. 4
      Michael Scrip
      85
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!