This is random ... You all know anything about garage door tracks?


Recommended Posts

This house was built in 2003 ... I bought it in 2016.  The weatherstrip was worn out so I went and replaced it ... while doing so I noticed the door was a bit tilted (little higher on the left vs right when shut).  I started to look more closely at the door and tracks and I'm thinking it was installed incorrectly. 

 ... this isn't right ... is it?

 

rollerattop.jpg.b42a6687e2f53fa35482fd1e821b1159.jpg

Door at top...note how left roller is a bit extended...vs how they are fairly even when the door is lowered....

bottomroller.jpg.4911ac6e08ef345dcb1a704477434f3b.jpg

 

Measurement of the distance between the tracks at the bottom...

measureatbottom.jpg.6831ad450548e9d8dbdcfc32c52a5f88.jpg

...vs at the ceiling...

measureattop.jpg.ceca7bf9f1ddf9976eda5045f70713c9.jpg

Seems to be about an inch and a half difference.

 

I should be able to simply unbolt those two bolts on the left bracket and move it over one circle (with the door lowered obviously)?  Right?

 

topbracket.jpg.0b138a96decde346742763820081948b.jpg

 

I think I should be able to ... the only confusion is that I can't believe they installed it incorrectly 20+ years ago and it's just now being noticed (unless the previous owners had some work done...though I'm thinking this is original to the house).

  • Jim K changed the title to This is random ... You all know anything about garage door tracks?

My take is that either it was installed incorrectly or the house has settled over the 20+ years and the door is out of alignment. The house settling happened to us and we had a garage door mechanic come by and adjust it. Regardless, I think it's an easy fix.

On 14/01/2024 at 13:32, Skyfrog said:

All I know about garage doors is the springs can carry lethal force and are really dangerous. Be careful when working on them; you may want to have it professionally inspected.

Long story short - I had my face rebuilt. If anything has tension, tie it first!

Seems to be the consensus on Reddit to just leave it alone, that it is fine.  Though I think a inch and a halfish is a bit much... I'll leave it alone.  Don't want to break what isn't broken.

I wouldn't mess with that spring thing either...

It seems to be within design tolerances, and if it works as it should, then probably leave it alone. But unless the entire building is not square, then it was installed half-assed.

I'd wonder who installed the door, and what other work they did.

On 14/01/2024 at 19:34, Jim K said:

Seems to be the consensus on Reddit to just leave it alone, that it is fine.  Though I think a inch and a halfish is a bit much... I'll leave it alone.  Don't want to break what isn't broken.

I was hesitant to say something when I read this thread yesterday, especially considering I know nothing about garage door tracks. But the one thought that ran around my mind was: it's been working for the 7+ years you've been at the house, does it need fixing? If it ain't broke, and all that... ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.5 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.5 changelog: Fixes crashes related to audio devices on Windows (DirectSound and ASIO) Fixes several crashes and memory corruption issues Fixes opening several headerless files at once, which previously dropped all but one Improves batch export by suggesting and remembering the destination folder Fixes accented and non-Latin characters in VST plug-in and compressed-archive file names Adds zstd compression support and updates the archive library Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I did think about a Echo show once and it would be useful to see what my cameras see. But my brother got one and I changed my mind. Adverts and not really worth the price just to see my cameras. I have a load of dots and a Echo Gen 4, they will do.
    • I asking where you are from or live, because if you don't live in the U.K, why are you so bothered? That is another reason I voted out, E.U and people poking their noses in where they should not be. Sadly we still have it, Trump, and his cronies. Putin as well and no doubt others. It makes no difference what we believe, if we made the right choice or not, we are out. As I said to someone when the news first broke we have voted out, we just need to make the best of it. I have no problems with closer ties to the E.U, we still need to trade. Just don't want to be in their club.
    • So you think I voted out because i am anti-immigrant. I am fed up with those that come over and think that we owe them something. The ones that are at the moment coming over from France where they are already in a safe country because they think and no doubt will get everything chucked at them. While people who were born and bred here get very little. I have nothing against as i have said before those that come here and work. In fact I know full well that our NHS would struggle without them. I do have a problem with those that come over here and try to push their religion and their way of life onto us. My reasons for voting out was because of what the E.U is and is also becoming. I did not agree with Freedom of movement, not because I don't want people over here, but because people need to be checked before being allowed to cross borders and that goes both ways. But my main thing was because the E.U is becoming if not already a united states of Europe. The only reason countries like Poland and Romania joined was because they had no money. When my partner left Poland, she had nothing, Poland had nothing, that is why she left. Wanted to learn something and earn a living. The E.U would have us back according to Michel Barnier. https://www.euronews.com/my-eu...ator-barnier-tells-euronews Why are you so scared to say what country you are in?
    • I wonder what that line really meant...
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      205
    3. 3
      PsYcHoKiLLa
      145
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!