RAM Issues with XMP on with ROG STRIX Z790-E GAMING WIFI 2


Recommended Posts

On 02/06/2024 at 23:23, heslo said:

Could still be a really poor IMC but I've never seen one that bad. Stick with the RAM being defective for now and see how you go!

IMC being on the CPU right? I hope that is not the case as replacing the RAM is 100% easier. I started a RMA with Corsair for the ram

 

On 02/06/2024 at 23:24, rockykid said:

It sounds like you've done some thorough troubleshooting already. Since Stick 1 passes in both slots but Stick 2 fails in one, it could indicate an issue with that specific stick. Before pursuing an RMA, you might want to try updating your motherboard BIOS to see if that resolves the issue. Also, double-checking compatibility with your motherboard's QVL is a good step. If the problem persists, reaching out to Corsair support for further assistance or considering an RMA could be the next best course of action.

The New BOIS version (1301) is broken right now as it kept casusing my CPU multipliers to fluctuate erratically, jumping from 55 to 8 on cores 1-9 and from 43 to 8 on cores 10-24.
My ram is listed within my mother QVL for the i9 13900K.
I started a RMA with Corsair.

Correct, IMC is the integrated memory controller. Some can be really poor samples not coping with high memory speeds and tight timings. You can play with CPU voltages to help it along a bit but honestly shouldn't be needed at 6000MT/s

On 03/06/2024 at 01:24, rockykid said:

It sounds like you've done some thorough troubleshooting already. Since Stick 1 passes in both slots but Stick 2 fails in one, it could indicate an issue with that specific stick. Before pursuing an RMA, you might want to try updating your motherboard BIOS to see if that resolves the issue. Also, double-checking compatibility with your motherboard's QVL is a good step. If the problem persists, reaching out to Corsair support for further assistance or considering an RMA could be the next best course of action.

Might want to read the whole thread before posting.

  • Thanks 1
On 07/06/2024 at 08:31, Richard Dewey Hammers said:

Hey, the issue was with the RAM. I RMA'd the RAM kit, and the new set passed memtest86 with on XMP and all settings at default.

Nice glad to see it was fixed! :)

  • Like 1
On 06/06/2024 at 20:42, Mindovermaster said:

May we say, "We told you?" :laugh:

Yep, I should I have just RMAd it from the start. 

Also Im new to having a i9 13900K And I noticed it can get pretty hot. While gaming is 50c-65c Pretty normal? My cooler is the Icue Link H170I.  Also My Ram seems to now reach up to 47c-50c while gaming now at 6000 but I take it that is pretty normal with DDR5

Anthor Odd thing Im not sure about is 'Intel Default Settings'. When I turn them on within my motherboard at Extreme (OCCMAX 400A) PC starts up with the CPU reaching around 85c. When I start my PC up with Performance (OCCMAX 307A) it starts at 72c. 

When I just leave everything at default and turn on the Asus MultiCore Enhancement to Disabled - Enforce All Limites (OCCMAX 280A) and set IA CEP and SA CEP to enabled my CPU Startup is around 57c

Could the higher the OCCMAX A the higher Temps gets pushed out on startup? I Know my cooler is working good as its a x3 140 radiator fan and made sure the thermal paste was applied right. 

chrome_de1fBZEbas.thumb.png.368a65775f5af3a813b73b19f7e12adf.png

Also note this is what I have my FAN speed curve set to
iCUE_o49KMLyffj.png.ee16159aee1aa2b9f26aedbcf838c301.png

Edited by Richard Dewey Hammers
On 10/06/2024 at 21:04, Richard Dewey Hammers said:

Also Im getting around 50-70c while gaming like I send before

That's normal, man. Most Intel CPUs DO run hotter.

50-70 is completely normal under load. No need to mess with the fan settings.

You're fine.

Most modern high-end Intel CPUs auto overclock to the limit of your thermal solution. If you watch any of the youtuber channels with custom water cooling it's quite normal for a 13900k/14900k to hit 95-100 degrees when running something like Cinebench and then thermally throttle themselves as the CPUs often generate 400W of power!

I updated my CPUs Power to PL1 and PL2 to follow intels defaults and update OCCMAX down to 200

OCCMAX: 200A
PL1: 125W 
PL2: 253W

I seem to be getting better temps  but is lowering my OCCMAX down to 200A ok to do?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • AnyDesk 9.7.7 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just 7 megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.7.7 fixes: Fixed an issue that prevented users from creating meetings without an active license Download: AnyDesk 9.7.7 | 8.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!