Recommended Posts

Hi. Is anyone else here experiencing issues because of an overzealous Cloudflare DDoS Protection? Since Neowin enabled it, every access to the website is “challenged”. No big deal, I understand that the site needs to protect itself, OK. But the problem is that the filter is just too strict.

Sometimes it challenges me again even after clicking articles from the main page. Comments? Many times, they won’t load (silently), and when I reload the page to fix the issue, there it is: Cloudflare challenge again. Many times, I’m trying to post a comment and it won’t post (also silently). I reload the page, Cloudflare challenge again, and only THEN the comment will be posted. It’s becoming a little too annoying, and I know it isn’t me because all this started since Neowin decided to enable Cloudflare DDoS Protection, which, again, I completely understand, but it’s acting up against legitimate users like me and hurting the site’s quality during browsing sessions.

I guess what I’m trying to ask is: can you guys please relax the filter a little, if that’s even possible? Am I the only one experiencing this?

EDIT: Cloudflare challenge appeared again just after writing this and trying to post it. Why???

  • Like 1
  • Thanks 1

It might be worth sticking you IP address into a couple of IP reputation checkers to see if something else is going on to cause Cloudflare to be suspicious of your IP or device. 

You could have someone using your WiFi, a compromised IoT device or be sharing a LAN with someone up to mischief during Christmas. This is usually the cause of bring repeatedly challenged. Also check that you didn't forget to disable a VPN service as they let the actions of others dictate your threat appearance. 

 

https://www.ipqualityscore.com/ip-reputation-check

https://www.abuseipdb.com/

Posted (edited)
On 02/01/2026 at 01:22, C:Amie said:

It might be worth sticking you IP address into a couple of IP reputation checkers to see if something else is going on to cause Cloudflare to be suspicious of your IP or device. 

You could have someone using your WiFi, a compromised IoT device or be sharing a LAN with someone up to mischief during Christmas. This is usually the cause of bring repeatedly challenged. Also check that you didn't forget to disable a VPN service as they let the actions of others dictate your threat appearance. 

 

https://www.ipqualityscore.com/ip-reputation-check

https://www.abuseipdb.com/

Thanks for the reply.

I don't have any of those issues. I don't use a VPN (not for Neowin, anyway), I've checked my ISP's IP reputation and nothing bad comes up, and I run a very clean home network. My machine doesn't have malware, and I'm running up-to-date versions of every software on it, including the OS.

EDIT:  just for trying to post this reply, there it is: Cloudflare challenge, AGAIN. Neowin is the only site that I visit that does that to me, and other websites also use Clouflare's DDoS Protection.

  • Like 1

I know that @Steven P. has had to tighten cloudflare settings due to some recent DDOS activity. I can't say I've been challenged much, though I'm in the US; so maybe it's location/country based that determines how strict/frequent the challenges are or something.

  • Like 3
On 02/01/2026 at 16:46, leonsk29 said:

EDIT:  just for trying to post this reply, there it is: Cloudflare challenge, AGAIN. Neowin is the only site that I visit that does that to me, and other websites also use Clouflare's DDoS Protection.

I am based in The Netherlands, and I never get the challenge unless I clear cookies or use a different browser to access Neowin and even then it is a one time thing.

When I was back in the UK I was getting challenged every day on the same device (my Surface Laptop 3) and browser!

I submitted a Cloudflare ticket last week, but I have not heard back yet.

The only thing I can think of with your situation is I am wondering if you have some sort of secure/private DNS, or is an ad blocker doing something with the cookie that Cloudflare is supposed to set or some extension? But yeah if it is only happening here and nowhere else, that seems odd too.

Have you tried to browse Neowin in Incognito/Private mode for a bit to see if the challenge keeps cropping up? (admittedly I did not do this when I was back in the UK, because the challenge only happened once per day).

Mozilla Firefox also has some aggressive privacy options enabled by default now that might be blocking things on the Cloudflare side.

  • Like 2
On 03/01/2026 at 04:46, Steven P. said:

I am based in The Netherlands, and I never get the challenge unless I clear cookies or use a different browser to access Neowin and even then it is a one time thing.

When I was back in the UK I was getting challenged every day on the same device (my Surface Laptop 3) and browser!

I submitted a Cloudflare ticket last week, but I have not heard back yet.

The only thing I can think of with your situation is I am wondering if you have some sort of secure/private DNS, or is an ad blocker doing something with the cookie that Cloudflare is supposed to set or some extension? But yeah if it is only happening here and nowhere else, that seems odd too.

Have you tried to browse Neowin in Incognito/Private mode for a bit to see if the challenge keeps cropping up? (admittedly I did not do this when I was back in the UK, because the challenge only happened once per day).

Mozilla Firefox also has some aggressive privacy options enabled by default now that might be blocking things on the Cloudflare side.

Thanks for the reply. I'm using Edge with DoH enabled, but that's it, and that's DNS-related, so it shouldn't have any impact on the browsing itself.

Many websites use Cloudflare DDoS Protection, but this only happens to me when visiting Neowin. I hope Cloudflare gets back to you about that ticket.

EDIT: I was challenged AGAIN when trying to post this, and it took me literally 30 seconds to write it, meaning that in those 30 seconds between my first visit (I was challenged, of course) and posting moment (challenged again), Cloudflare interpreted that I was a bot for some reason! 🙄

  • Like 1

I've only gotten the challenge once and that was on my phone with no VPN. On my PC which I'm using to type this, I'm using ProtonVPN with nine reports on abuseipdb.com (none in the past two months) but no capcha on Neowin. Funny enough I did get a captcha when I accessed the link thru C:Amie's post above. 

Also I just noticed Firefox mentioned on Steven's post and I'm using it right now. I have Adguard installed on my PC, and Consent-o-Matic and Canvas Blocker extensions on Firefox. I have strict tracking protection, HTTPS-Only Mode enabled. DNS is thru my network is configured at router level and is HTTPS over DNS thru Cloudflare. 

If you have any questions, lmk. 

FYI I disabled my VPN and only got one cloudflare captcha on my first attempt to access Neowin but not when I clicked the comments button or accessed articles. 

 

edit: No VPN, but I got another captcha when I clicked post! That's definitely not normal for me. 

Posted (edited)
On 03/01/2026 at 19:17, fintechfooty said:

I've only gotten the challenge once and that was on my phone with no VPN. On my PC which I'm using to type this, I'm using ProtonVPN with nine reports on abuseipdb.com (none in the past two months) but no capcha on Neowin. Funny enough I did get a captcha when I accessed the link thru C:Amie's post above. 

Also I just noticed Firefox mentioned on Steven's post and I'm using it right now. I have Adguard installed on my PC, and Consent-o-Matic and Canvas Blocker extensions on Firefox. I have strict tracking protection, HTTPS-Only Mode enabled. DNS is thru my network is configured at router level and is HTTPS over DNS thru Cloudflare. 

If you have any questions, lmk. 

FYI I disabled my VPN and only got one cloudflare captcha on my first attempt to access Neowin but not when I clicked the comments button or accessed articles. 

 

edit: No VPN, but I got another captcha when I clicked post! That's definitely not normal for me. 

I don't get that many captchas, only the "Verifying" spinner thingy, but it's EVERY damn time I try to enter Neowin, sometimes trying to open an article from there, or trying to post comments, or trying to load the comments section. And it only happens here, other websites also use Cloudflare DDoS Protection but none of this happens on those.

I use the latest version of Edge on the latest version of Windows 11, everything is up-to-date, DoH enabled, HTTPS enforcement enabled, a standard ad-blocker and strict tracking protection enabled. No VPN, (at least not for Neowin). I've checked my IP's reputation and nothing shady comes up, it's clean. It's not this machine since it happens on others, too, more or less frequently. Microsoft Defender is up-to-date and enabled, too, along with UEFI and Secure Boot. I don't have a TPM but I'll assume that's not the problem, Cloudflare wouldn't go THAT far, I imagine, and I'm pretty sure that JavaScript code running sandboxed inside a web browser can't access that info anyway.

EDIT: what do you know, tried to post this, Cloudflare challenge, AGAIN.

On 03/01/2026 at 17:38, leonsk29 said:

I don't get that many captchas, only the "Verifying" spinner thingy, but it's EVERY damn time I try to enter Neowin, sometimes trying to open an article from there, or trying to post comments, or trying to load the comments section. And it only happens here, other websites also use Cloudflare DDoS Protection but none of this happens on those.

I use the latest version of Edge on the latest version of Windows 11, everything is up-to-date, DoH enabled, HTTPS enforcement enabled, a standard ad-blocker and strict tracking protection enabled. No VPN, (at least not for Neowin). I've checked my IP's reputation and nothing shady comes up, it's clean. It's not this machine since it happens on others, too, more or less frequently. Microsoft Defender is up-to-date and enabled, too, along with UEFI and Secure Boot. I don't have a TPM but I'll assume that's not the problem, Cloudflare wouldn't go THAT far, I imagine, and I'm pretty sure that JavaScript code running sandboxed inside a web browser can't access that info anyway.

EDIT: what do you know, tried to post this, Cloudflare challenge, AGAIN.

i gotcha. still though, i generally only get a captcha on the first visit to Neowin. ^this ipv6 thing might be worth checking out. hope everything resolves quickly for you. 🙂

I've never seen the Cloudflare challenge - in fact I'm yet to see any existence of Cloudflare on this site.

Not saying it isn't present - just that it's been completely transparent to me.

Another website I use I do see Cloudflare interaction (which lasts momentarily before disappearing) reasonably often, but it has never caused an interruption on my desktop. My mobile it has - simply to verify i'm a human and off I go. (Confirmed DDOS protection)

If you are seeing this repeatedly, there is something that either you, your computer, or your network are doing. Perhaps you are on CG-NAT, this will definitely trigger the prompt. (My mobile, when I am away from home, does this due to the carrier's use of CG-NAT on mobile networks)

On 05/01/2026 at 01:10, neufuse said:

could IPv6 have anything to do with it? when I disable IPv6 I don't get the verifying you are human pages... but turn it on and every time I do anything there it is......

Yes! My parents only have IPV6 and I was being challenged every day back in the UK. 

I found this topic, which suggests that the geo location of the IPV6 address could be incorrect and why it is flagging https://community.cloudflare.com/t/problem-accessing-sites-secured-by-cloudflare-with-ipv6/262108 more reading (wrong geo) 

You can check neowin by using this URL https://www.neowin.net/cdn-cgi/trace

I still have not gotten a reply from Cloudflare on my ticket, seems they aren't very good with support (we're on a Pro plan).

  • Like 1
  • Thanks 1

FWIW, I was here earlier using current version of Edge and got the Cloufare thing 1 time and I was in. Just now tried coming back here in Edge and can't get past the Cloudfare thing. Tried verifying 10 times and couldn't get past it. Tried in Firefox now and got the verifying thing once and now here I am.

First time that's happened in Edge, which is what I usually use when coming here, as Neowin just seems faster using it over Firefox. 

Edit: Just tried coming here using the Helium browser and no issues with it either.

Edit 2: Tried coming back using Edge now and didn't even get the Cloudfare thing

I am using Nordvpn atm also.

On 04/01/2026 at 19:10, neufuse said:

could IPv6 have anything to do with it? when I disable IPv6 I don't get the verifying you are human pages... but turn it on and every time I do anything there it is......

My ISP doesn't use IPv6, so no. Or are you actually referring to disabling IPv6 on the NIC's properties?

On 04/01/2026 at 23:09, Raa said:

I've never seen the Cloudflare challenge - in fact I'm yet to see any existence of Cloudflare on this site.

Not saying it isn't present - just that it's been completely transparent to me.

Another website I use I do see Cloudflare interaction (which lasts momentarily before disappearing) reasonably often, but it has never caused an interruption on my desktop. My mobile it has - simply to verify i'm a human and off I go. (Confirmed DDOS protection)

If you are seeing this repeatedly, there is something that either you, your computer, or your network are doing. Perhaps you are on CG-NAT, this will definitely trigger the prompt. (My mobile, when I am away from home, does this due to the carrier's use of CG-NAT on mobile networks)

I am behind CG-NAT, yes, but that doesn't trigger the Cloudflare challenge anywhere else, just here, so I don't think that's the issue.

On 05/01/2026 at 11:17, cork1958 said:

FWIW, I was here earlier using current version of Edge and got the Cloufare thing 1 time and I was in. Just now tried coming back here in Edge and can't get past the Cloudfare thing. Tried verifying 10 times and couldn't get past it. Tried in Firefox now and got the verifying thing once and now here I am.

First time that's happened in Edge, which is what I usually use when coming here, as Neowin just seems faster using it over Firefox. 

Edit: Just tried coming here using the Helium browser and no issues with it either.

Edit 2: Tried coming back using Edge now and didn't even get the Cloudfare thing

I am using Nordvpn atm also.

Mmm, maybe it's an Edge thing, since I use Edge on both my desktop and my phone and on every other computer. I'll try to use Firefox to see if anything changes. Thanks. But that doesn't explain why the challenge isn't being triggered on other websites, though...

On 05/01/2026 at 12:25, leonsk29 said:

Mmm, maybe it's an Edge thing, since I use Edge on both my desktop and my phone and on every other computer. I'll try to use Firefox to see if anything changes. Thanks. But that doesn't explain why the challenge isn't being triggered on other websites, though...

Since I posted that, and as my edit 2 says, I've been able to load Neowin using Edge and in fact, haven't seen the Cloudfare thing once since. I have closed and re-opened Edge a few times also and just surfed around other sites and then came back here and still no Cloudfare.

Whatever triggered the issue I had for a minute must've just been a weird fluke thing, I guess?

Another FWIW is I'm not seeing that Cloudfare thing at all using the Helium browser now either.

Edited by cork1958

Interesting. Turns out my IPv6 had disabled itself on the ISP side, so I had fallen "back" to IPv4.

Fixed that up and tested IPv6 working correctly. Instantly hit with Cloudflare verification on Neowin. It automatically passed in this case.

I might force Neowin to stick to IPv4 :laugh:

  • Like 1

I was not challenged on my laptop this morning with IPV6 enabled. (I manually disabled IPV4 in the adapter).

Back in the UK I was being challenged every day on the same laptop with a IPv6 only connection, but not here at home in The Netherlands.

BTW I am getting it multiple times a day too on my main PC now that I enabled IPv6 in my ISP router. Annoying to say the least. @DaveLegghas a support ticket open, I believe @leonsk29is helping with identifying the issue too.

On 12/01/2026 at 07:18, Steven P. said:

BTW I am getting it multiple times a day too on my main PC now that I enabled IPv6 in my ISP router. Annoying to say the least. @DaveLegghas a support ticket open, I believe @leonsk29is helping with identifying the issue too.

It's interesting this is happening here, we us cloudflare with the WAF and a LOT of the OWASP and other rules turned on and I don't see it on our web farm at all with IPv4 or IPv6... did you ever look up any of the ray-id's in their even log to see exactly why it's being triggered?

  • 4 weeks later...

It's almost every other time I refresh the home page. I've even had it happen when I'm replying to a post and it's loading the post I'm replying to in the message editor. I had to confirm I was human within the iframe (or whatever is used, maybe just a div) that the previous message was being loaded.

Annoying, but at least it's just a tick box and not a full on Captcha.

We've made some changes on our end which now mean we can make the challenge rules on Cloudflare's side less strict. It was never our intention to be challenging users as regularly as you've been experiencing - the setting for that on Cloudflare is set to rechallenge after 30 days. Despite long conversations with support at Cloudflare, we've been unable to get that resolved, so we've now implemented our own solution to the root problem we were trying to resolve with the challenge from Cloudflare. That was rolled out a few minutes ago, and the challenge has been disabled. Cloudflare will now only challenge traffic it believes is behaving like a bot.

On 07/02/2026 at 14:33, DaveLegg said:

We've made some changes on our end which now mean we can make the challenge rules on Cloudflare's side less strict. It was never our intention to be challenging users as regularly as you've been experiencing - the setting for that on Cloudflare is set to rechallenge after 30 days. Despite long conversations with support at Cloudflare, we've been unable to get that resolved, so we've now implemented our own solution to the root problem we were trying to resolve with the challenge from Cloudflare. That was rolled out a few minutes ago, and the challenge has been disabled. Cloudflare will now only challenge traffic it believes is behaving like a bot.

Thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • DVD only? What kind of self-respecting optical disk backup/ripping tool doesn't support Blu-ray these days? I burned all my DVDs like 15+ years ago...
    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DWARF mini review: the world's smallest smart telescope for night and day sky captures by Steven Parker DWARFLAB reached out to me asking if I was interested in checking out the DWARF mini, which is a portable astronomy telescope designed for amateur astronomers. Why do I say it's for amateurs? Well, for starters, it's not what you'd call "high end"; it's more of a professional-grade starting point for amateurs serious about capturing what's up there in our night and day skies. A typical amateur astronomer is most likely thousands of dollars deep into the hobby, and I will make no claims that this DWARF mini (at a fraction of the cost) could replace it all, okay? Well, if you read on, it will be clearer what I am trying to convey. Disclosure: DWARFLAB provided a free sample without any editorial input or review pre-approval. I have always been interested in looking up and observing the night sky. I see satellites crossing the sky above my garden most nights, and I am always looking at the moon. Yeah, I have a 200MP camera on my phone, but at 200X zoom, AI takes over and makes the pretty moon pictures that I snap, the DWARF mini does not, you get an actual true picture of what you can barely see with the naked eye. Before we start, let's share the highlights of the DWARF mini in bite-sized format: Pocket-Sized & Ultra-Lightweight Weighing just 1.85 lbs (840g), the DWARF mini easily fits into a backpack or large pocket. Its all-in-one, compact design makes it the ultimate grab-and-go digital telescope for hiking, camping, or traveling to dark-sky locations. Intuitive App Control & Built-in Sky Atlas Go from unboxing to your first shot in just 3 minutes! The DWARFLAB App provides a seamless experience with an interactive star map. Simply select your target and start exploring without the steep learning curve of traditional setups. Auto GOTO & 360° Pivot Freedom Enjoy pinpoint automated tracking with full 360° rotation. Powered by a high-sensitivity Sony IMX662 sensor (1/2.8-inch, 2.9μm pixels), it captures amazing, low-noise astro details, bringing faint nebulas and star clusters to life with stunning clarity. Pro-Level EQ Mode & Long Exposure Unlock advanced deep-space imaging with Equatorial (EQ) Mode. Supporting impressive single-frame exposures up to 90 seconds and featuring built-in light pollution filters, it easily cuts through city glow to reveal intricate celestial structures. Smart Cloud Processing & All-Ages Fun Effortlessly enhance your raw data with integrated cloud processing for professional-grade results. Perfect for beginners, kids, and adults, this telescope makes exploring and sharing the wonders of the universe an exciting, family-friendly adventure. The packaging is a pretty minimal affair with the outer box opening like a flap to reveal the plastic mould of the DWARF mini sitting in it. Below, the Sun filter, charging cable, cleaning cloth, and documentation can be found. DWARFLAB also provided a Mini Hydraulic Tripod ($89.99), and I highly recommend getting it if you plan on purchasing the DWARF mini, as it fully supports the motorized tracking feature of the telescope; plus, at 840g, the weight of the telescope, you will need a tripod that supports more than the weight of a smartphone anyway. What's in the box DWARF Mini Smart Telescope × 1 Sun Filter x 1 Type-C to Type-C Cord x 1 Cleaning Cloth x 1 User Guide With that out of the way, here are the full specs: DWARF mini Dimensions (DWH): 60.70 mm x 100.38 × 183.61 (2.39" x 3.95" x 7.23") Weight: 840g (1.85lbs) Aperture diameter: 30 mm (telephoto), 3.4 mm (wide angle) Image Sensor: SONY IMX662 1/2.8" (Telephoto) OmniVision OS02K10 1/2.8" (Wide-angle) Focal length: 150 mm (telephoto), 6.7 mm (wide-angle) Equivalent focal length: 1016 mm (telephoto), 45 mm (wide-angle) Shutter Speed: Tele - 1/10000-90s, Wide - 1/10000-30s Maximum exposure time: 90s (telephoto & wide-angle), Both in EQ mode Rotation range: Lens: 225°, Base: 360° Effective Pixels: 2.07M Maximum Resolution: 1920 × 1080 (Telephoto & Wide-angle) Built-in filters: Astro, Dark, Duo-Band (Telephoto), Astro (Wide-angle) Output: JPG, FITS, TIFF, MP4 Shooting Mode: Photos, Videos, Astronomy, Burst Shooting, Time-lapse Photography Storage: 64 GB Battery: Built-in 7000 mAh, supports external USB charging Charging Port: Type-C NPU: 1 TOPS Features: WiFi, NFC NFC One-Touch Connection Astronomy Post-Processing/Appointment Shooting/Astronomy Mosaic Wi-Fi Transmission Range: 15m (open environment) Color: Black Compatibility: iOS & Android smartphones/tablets Warranty: 2-years (24-months) MSRP: $399 Design Charge port On/off button Lens On the DWARF mini itself, it is a pretty minimal affair. On one side, there is a Type-C USB port to charge the non-removable 7000 mAh battery, and on the other side, a large button to power on or off the telescope. The button is flanked by an LED that is green when connected via the DWARFLAB app, or lights up red when being powered off. Below the button, there are four LEDs that indicate battery power. The DWARF mini does not have any sharp edges as all sides are rounded off; it has a good heft to it, but the weight of it feels quite balanced in the hand, so it isn't top or bottom-heavy. On the front there is the DWARFLAB logo which is quite small and there are no other markings on it. The tripod offers full 360° rotation of the motorized base, which allows for tracking for the time-lapse mode, but also for the 90-second captures of nearer objects in the sky, such as the Sun or the moon. Usage To get started, simply power on the DWARF mini and open the DWARFLAB app, tap on Connect, and it will scan for the DWARF mini over the Wi-Fi network. The device supports both 2.4 GHz and 5 GHz Wi-Fi, as well as Bluetooth for discovery, so connection issues were minimal in my experience with it. As previously noted in the specs, the DWARF mini will stay connected with a phone or tablet up to 15 meters in an open environment, such as a backyard. Lighting status Powering on: The green circular light will rotate and breathe in turn Powering off: The red circular light is gradually extinguished Connecting: Green light strip rotating Connected: Green light strip solid/always on 4 lights 1= 0-25%, 2= 25-50%, 3= 50-75%, 4= 75-100% battery power To view the full lighting status, such as tracking mode and connection failure, you can check the user guide on the official DWARFLAB page. DWARFLAB app Above, you can see the steps undertaken to connect the DWARFLAB app to my Galaxy S26 Ultra. Weirdly, I got an alert that a firmware update failed to get uploaded to the DWARF mini the first time, but upon retrying, it worked. Then place the DWARF mini outside, make sure your smartphone or tablet is connected to it, and then head back inside, because you can manage it from the comfort of your home. Simply enter the Atlas tab in the app and search for what you want to capture, and then tap on the camera icon; the DWARF mini will then attempt to track the object and give you a live view right on your connected device. Results I've had the DWARF mini since April, but even though my garden is south-facing, I had a lot of trouble trying to capture a good image of the moon. In the end, it was possible after I took it with me on a trip to my parents in Southend, UK, at the end of May. Here is a capture of the moon, resulting from 20 stacked images over a 90-second exposure. What you are seeing here is not AI-assisted. A good example of what I mean is the latest flagships with their 200MP cameras claiming to capture things like closeups of the moon, and while they are not as good as the above example on the DWARF mini, the resulting image on smartphones is actually AI-assisted above 30X zoom. Here is an example of a similar shot at the moon at 200X zoom using an HONOR Magic8 Pro. The difference is clear. Next, here we have a shot of the daytime moon. Here is a shot of Arcturus, the red giant star, which is the fourth brightest in the night sky. As previously mentioned, it could be a bit clearer, but clouds passing in front of it muddied the shot a bit. The Sun The DWARF mini also ships with a sun filter, meaning you can take great shots of the sun as well. Tracking Sun Resulting (stacked) shot Live zoom The pictures themselves are limited to Full HD, and some of the examples actually came out in HD (1280x720), but this is because the standard telescopic result is in 720p while "Wide" is in 1080p. Above you can see how in the app the Sun is tracked, the resulting capture, and Live zoom. I have only scratched the surface of what is possible with this telescope; I found several examples online of shots of the Milky Way, among others, such as nebulae and galaxies. All of this requires patience and knowledge, although if you know what you are looking for, simply enter it in the Atlas tab in the DWARFLAB app, tap the camera icon, and the telescope will attempt to track it. Conclusion The good The DWARF mini definitely places itself in a price point that makes astrology accessible to anyone looking to get started in the hobby. Say you want to have a closer look at the moon, simply enter it in the Atlas, and the Live view also lets you zoom in and snap pictures. The bad Some issues I came across while operating the DWARF mini were that it sometimes failed to connect unless I held my smartphone right next to it, and finding and tracking sometimes took several attempts to get it calibrated. I discovered that it helped if I sort of positioned and pointed the telescope in the general area it was supposed to detect, but this obviously wouldn't work with objects you can't see with the naked eye; more testing is required for that. Another bit of advice is to ensure that the lens is clean. While making the examples of live zooming on the sun, I discovered that the telescope lens and sun filter were not completely clean, and only after cleaning with a microfiber cloth was I able to get a decent shot of the sun. Where to buy and a coupon Okay, $399 is not cheap for a side hobby, but nor is a $1,500 smartphone flagship that you'll most likely have for a couple of years. This is a one-time entrance into astrology, and it won't become obsolete in one year like a smartphone. It's a thumbs up from me. The DWARF mini is available to buy right now in the U.S. and U.K. at the links below. DWARF mini for $399 on the official site DWARF mini for $399 on Amazon U.S. Use the NEOWIN5OFF coupon code for an additional 5% off at checkout (expires June 21) As an Amazon Associate, I earn from qualifying purchases.
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!