HP PSC1210 printer


Recommended Posts

This is an all-in-one printer (printer, copier, and scanner)

psc1210.jpg

P932747.jpg

Price: $100 USD

(Y)'s

multifunction color printer.

weighs 11 pounds

12ppm (black- 600x1200dpi) 10ppm (color- 1200x1200) COPYING speed

12ppm (black) 10ppm (color) PRINTING speed

transperancies, envelopes, plain paper, cards, labels, and iron on transfers

USB connection

1 year warrenty.

(N)'s

There is only one thing that ****es me off so much and i hate HP for this. the drivers and software are not WHQL certified drivers and no one else makes drivers for them (windows drivers are no use) you are forced to use their crap drivers that take up your windows, system32, drivers, plus other folders. and take up more resources while it runs in the backround.

i always uninstall the software after i install the drivers. and you can't simply install the drivers. i've tried it. it won't work. you have to install the bundled HP software that comes with it and then you can uninstall it. and use ps or built in windows to scan and print your papers.

Other:

other than that, it is conservative when it comes to ink. i've had it for over 6 months and i have not had to replace it yet. the printing quality is good and doesn't run off even when you print "draft" style.

this printer blows any other printer mainly because it is HP and lexmark nor epson can compete with this printer at this price. and this is excellent for a student like me.

Edited by Vice King
Link to comment
https://www.neowin.net/forum/topic/160028-hp-psc1210-printer/
Share on other sites

Indeed, I have the HP PSC All-in-one 1350, which is an upgrade to that one. This printer is the best printer I ever had, and trust me, I've had plenty of them. I purchased it in December for $120 and it is still running on the default ink cartridge that came with it. I've printed about 5 research papers averaging 11 sheets per research paper. One thing I've also noticed is its photo quality. I scanned a few pictures and decided to print them on picture paper and to my dismay, it came out perfect.

The downside as King said is the software you are FORCED to install. I have about 300 mb of crap installed and I cannot uninstall it or else the printer won't even work. The only thing I was successful uninstalling was Memories Disc, which I do no use.

Very good printer for an average user and student.

I have a psc 1210 sitting by my desk gathering dust... imo its a piece of crap. I've had this thing only since last august, and now it won't even print more than 1 page without the carriage getting jammed... I have no idea why either. Also, as it prints there is a smudge all the way down the page about 1/3 width ways from the center. I've done everything i could: cleaned the print cartridges, got new print cartridges, and contacted HP support numerous times.

So not too long ago, I went out and bout an epson stylus cx5400, and now life is good again :-D

Hmmm I was looking at that printer in Future Shop, pretty cheap all-in-one. The thing that attracted me was the look of it, beautiful. I hate all printers keeping that plastic look (I have a lexmark all-in-one and it was great at first but now it's a bulky piece of crap)

I don't use my printer that much now, but a cheap one would be great. I'll look at that one more now. Thanks dude!

Cheers

i have the 1300 and its a really great multifuction printer.mine has a memory card hub for every flash card out there.its very economic too,the ink cartriges are still hanging in there,even with all the things i print everyday.

and for 150.00USD in Office Max, i cant get anything better

The PSC750 is a bit older that the 1210. The 750 uses the hp 15 and 78 ink cartridge, compared to the 56, 57 and 28 on the 1210 ... that's all I can think of .... oh I almost forgot, the 1210 Is a "bit" smaller :p

pic01311.gif

PSC 750 -> if you want to see how big it was ( cuz it's discontinued ) look at the hp psc 2175 model it was the same thing but a bit higher.

welll

Black ppm : 11 for 750 and 12 for 1210

color : 5 for 750 and 10 for 1210

For the print quality you get with the photoret technology

2400X1200 with the 750

and 4800X1200 with the 1210

but this is with the optimized results using a 1200X1200 output quality ... you only get a real 600X600 dpi resolution

so we could say they are similar in print quality

btw: the 750 has a bigger paper tray 150 copies instead of 100

EDIT : as for the integrated scanners : they have the same resolution 600X2400dpi and a color depth of 36 bit

  • 2 weeks later...

I used to support the OfficeJet line of printers for HP, and I can honestly say that the PSC is a decent entry level multifunction printer for the average computer user, as long as you like spending extra money to keep replacing stuff that keeps breaking. I know pretty much everything there is to know about them even 2 years after no longer being employed and supporting the machines. As far as I can tell, the chassis haven't really changed much, but in my experiences a lot of the HP multifunction printers are notorious for mechanical problems and are kinda finicky when it concerns some paper media. A lot of the HP printers are engineered to perform best with HP paper and can choke on other paper pretty easily.

The drivers and software for the OfficeJet printers were crap when I supported them, and I have no doubt in my mind that they are still crap. The hardware and software engineers work independently from one another for each new printer, so there are always problems with software. Another factor, is that the same development teams are never used twice so one series of printer may perform tons better than another. One problem that was big with the PSC series, and even the G & K series is that the carriage uses a specialized blue optical laser to align the printer cartridges. It was common for the laser's lens to just pop off of the carriage and into the printer. This will render the printer useless, and into the scrap pile it goes.

When you called tech support with an issue identical to the one I stated, all HP does is send out a refurbished unit as a replacement for your faulty machine, regardless if you bought it only yesterday. If you ever get a printer that gets jacked up within the timeframe of the store's return policy, by all means try and take it back to get a replacement. If you don't, HP will be ready to send you another pile of junk that was broken at one time... They are pretty shady about that kind of stuff.

Aside from the crappy software problem and some of the scan options, the PSC printers are pretty decent but in no way in tune with my needs as an advanced computer user. I would never buy one, and that is partly because I know how they are made, how they operate, and how much you get screwed over by HP if it breaks before the warranty is up.

My Epson 1000ICS all-in-one has Epson's typical top-notch scan quality. Check out the Epson CX5400.

that's $150

for that price i can get the upgrade to my PSC1210 and get the 1350.. the upgrades are:

Prints: up to 17 ppm black and 12 ppm color; up to 4800x1200-dpi

Copies: up to 17 cpm black and up to 12 cpm color; up to 50 copies

Scans: up to 19,200-dpi enhanced

Select photos and print without using your PC (CompactFlash?, SmartMedia, Memory Stick?, Secure Digital/Multi Media, or xD-Picture Card?)

Create digital slide shows using HP Memories Disc Creator software

Prints borderless 4 x 6" photos

the only advantage the epson has over the Hp is the scanning resolution, but who really needs to scan at that resolution? and all those features about "Cost-saving individual ink cartridges" i know epson is better than lexmark at ink costs.

i bought my HP August 2003, and both my sister and i have printed hundreds of pages and the ink is about half full, and i don't know if epson does this, but HP's come with full ink.

don't get me wrong, i'm not argueing, i like epsons, i just prefer HP over anything else.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • About bloody time. I have got PRs with hundred of files and the Web UI just struggling to even load the pages.
    • I wonder if it was applying secure boot certificates/dbx files?
    • I recently tried edge. It seems a lot better. A lot of the junk in it is gone. It seems less bloated and snappy.
    • Lethal fake phone chargers are still being sold on Amazon and eBay, UK watchdog warns by Paul Hill Credit: Pexels The UK consumer rights organization, Which?, is claiming that “potentially lethal knock-off chargers” are still being sold on online marketplaces seven years after it exposed the danger of these chargers. In its latest investigation, it bought 15 USB phone chargers from several online marketplaces and found they were missing key information, meaning they cannot be legally sold in the UK. Which? bought the 15 chargers from seven online marketplaces. These were Amazon (including Amazon Haul), AliExpress, B&Q Marketplace, Debenhams Marketplace, and eBay. It said that the chargers were so badly made that anyone using them was at risk of electric shock. Over half the chargers also posed fire and explosion risks. Of the chargers purchased, one was a fake Apple USB-C 35W power adaptor charger. To confuse buyers, the box was branded with an Apple logo, but testing found it to be a fake. Further testing picked up arcing sounds after 10 seconds of use, where a current jumps between two parts of the electrical circuit, which can cause fires, explosions, or electric shock. The manufacturers of this particular charger also put modeling clay inside it to make it feel more weighty, robust, and genuine. Not all of the chargers were technically faulty; however, some were missing key packaging, markings, and documentation, meaning they can’t be sold in the UK legally. Which? said that it is now campaigning alongside a coalition of safety groups and businesses for new laws that make online marketplaces responsible for ensuring the safety of products that they choose to list on their websites. It also said the government needs to start using powers under the Product Regulation and Metrology Act, which was adopted last July, to impose safety requirements on online marketplaces via secondary legislation, but so far, there have been delays. No matter what country you are in, be sure to properly research what you are buying and only buy authentic chargers to prevent fires. You can read more about Which?’s research here.
    • Visual Studio finally gets long-awaited feature that developers will love by Usama Jawad Visual Studio Code is Microsoft's popular, lightweight, open-source code editor, it is actually Visual Studio that is the company's flagship integrated development environment (IDE). Although the IDE already offers a boatload of useful features for developers, Microsoft has finally introduced a long-requested capability that will be loved by many. While developers have already been able to create Git pull requests (PRs) directly within Visual Studio for the past couple of years, it had not been possible to review a PR without switching to the browser, until now. Microsoft revealed in December 2025 that it is working on UX that enables developers to do just that, and fast-forward to June 2026, and Visual Studio finally has native capabilities to open and inspect a PR, discuss feedback, and wrap up the review, all without switching to the browser. This integration works for both GitHub and Azure DevOps (including on-prem). Developers have access to multiple surfaces to open a PR, including Git Repository, Git Changes, and the Git menu in Visual Studio. Once you open a PR, all the important details will be immediately visible to you, from where you can navigate to various levels of granularity and branch states, depending on the reviews that you are engaged in. As you would expect, you also get a diff view that enables you to see code changes inline or side-by-side in a separate panel. You can also review commit-by-commit. Additionally, this UX fosters collaboration as you can leave comments, reply to threads, and resolve conversations easily. Naturally, you can also leverage Copilot to apply a code suggestion to fix a potential issue. When you are done, you have the ability to approve, complete, and merge the PR. This is a pretty major feature as it has been requested heavily for the past few years. You can try it out in Visual Studio 2026 version 18.7, made available here recently. Microsoft plans to enhance this experience further in future releases with comment filtering, a timeline of PR activity, and more.
  • Recent Achievements

    • Week One Done
      Timaximus earned a badge
      Week One Done
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
    • Week One Done
      davidbazooked earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      499
    2. 2
      PsYcHoKiLLa
      174
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!