The X800 is here


Recommended Posts

ATI revolutionizes PC gaming with introduction of RADEON? X800, the world?s fastest visual processor

MARKHAM, ON ? To the delight of gamers everywhere, ATI Technologies Inc. (TSX: ATY, NASDAQ: ATYT) today launched its RADEON? X800 Visual Processing Unit (VPU) which will deliver the industry?s most awesome gaming experience possible on a PC. With the introduction of the RADEON X800, ATI continues its two year reign as the industry leader in high-end graphics for gaming and ushers in a new era, High Definition Gaming. Worldwide system integrators, original equipment manufacturers and board partners are excited to deliver RADEON X800 powered systems and boards beginning immediately.

Gamers using computers powered by RADEON X800 will enjoy a higher performance, immersive gaming experience that looks better than ever before. This High Definition Gaming experience is the PC equivalent to watching a sporting event on an HDTV. This is made possible by the highly scalable and efficient architecture of the RADEON X800 that uses 16 parallel pixel pipes and 6 vertex pipes to process more than 8 billion pixels and almost 800 million vertices per second.

?The RADEON X800 builds on the great success of the RADEON 9700 and RADEON 9800, the most sought-after high-end visual processors in the world," said Rick Bergman, Senior Vice President Marketing, General Manager, Desktop, ATI Technologies Inc. ?With the RADEON X800, the design team has accomplished something that no one thought was possible. Not only have they developed the highest-performing and most efficient graphics architecture in the world, they have done so while maintaining high levels of stability, reliability and manufacturability.?

ATI has used the most advanced technologies available to design and manufacture its new RADEON X800 graphics chips. Using the successful low k .13 micron semiconductor process from Taiwan Semiconductor Manufacturing Co., Ltd., ATI created a scalable, highly parallel and powerful visual processor that is twice as fast as today?s performance leader, the RADEON? 9800 XT. The advanced fabrication process and leading-edge GDDR3 memory have also enabled ATI and its board partners to deliver high-performance, user-friendly graphics card solutions which will work in customer?s existing PCs without requiring radical and costly power supply or cooling upgrades.

Read the rest of ATi's press release: Here

Reviews

Tomshardware

HardOCP

DriverHeaven

Beyond3D

Extreamtech

Lost Circuits

HEXUS.net:Dr />

Leebobs :D

Edited by leebobs
Link to comment
https://www.neowin.net/forum/topic/163813-the-x800-is-here/#findComment-2058749
Share on other sites

ATI schools Nvidia! [original thread title lost on merge so added to post for sake of clarity -Spyder]

Source [H]ardOCP

1083564189888Adk70te_10_1_l.gif

The above chart will give you a quick understanding at just how powerful these video cards are when it come to gaming in the real world. Above you can see the IQ settings that we found playable on our test system.

There is a very obvious pattern here; 1600x1200 with AA and AF on the X800XT. Only in one game did we have to play at 1280x1024, and that was only because the game, NFS: Underground did not support 1600x1200 resolution. Otherwise every single game was playable at 1600x1200 with AA and AF! We find this to be nothing short of incredible and frankly we did not think we would see this kind of video card power till possibly later this year.

The Radeon X800Pro comes in second in the pack and did achieve 1600x1200 with AA and AF in a couple of games with the rest being playable at 1280x1024 with AA and AF.

The GeForce 6800Ultra came in third from the top in our testing, as it had only one game that it could run at 1600x1200 with AA and AF. The rest played best at 1280x1024 or 1280x960 with AA and AF. In the case of the new FarCry game that many folks is buzzing about, only 1024x768 MediumAA/4XAF was playable. That said, NVIDIA gave us a newer set of drivers that were outlined to improve FarCry frames per second by 20% by working out some Z culling issues according to NVIDIA. These new v61.11 drivers also were saddled with IQ bugs and we did not feel comfortable testing with them as we would not have suggested them for your gaming experience.

Comparing IQ Technology:

Looking at the Anti-Aliasing and Anisotropic image quality between the X800 series and the GeForce 6800Ultra we find them to be very comparable. There is one difference though. The X800 is so powerful, 6XAA is actually a useable Anti-Aliasing setting on the X800 series whereas comparable 8XAA on the 6800Ultra, is basically not usable, as it is too demanding in terms of performance because it is a super-sampling + multi-sampling technique.

The only shader quality differences we noticed were in FarCry where the X800 series is providing much better image quality. Compared to the 9800XT the X800 series have identical AA, AF and shader quality.

Temporal AA is an interesting feature, and one that you will simply have to judge for yourself. Some may like it some may not. Just keep in mind that it does enable VSYNC when it is turned on and if the framerate goes below 60fps it shuts off. Therefore in order to get the most benefit out of it you need to keep the framerate very high, the closer it is to your refresh rate the less shimmering you will notice. We are happy that ATI is evolving new techniques for improving image quality and providing a potentially better AA image quality with no performance hit impact.

Dueling Shaders:

So here we are at the question that we know everyone will be thinking about, what about Shader Model 3.0 versus Shader Model 2.0? Right now it isn?t even exposed on the GeForce 6800Ultra and won?t be until DX9.0c is out. There isn?t much to say except that both will look the same this year unless we see games with true displacement mapping implemented. Technically the X800 series, and going all the way back to the Radeon 9700 series, support point sampled Displacement Maps via N-Patches, while the 6800Ultra supports filtered Displacement Mapping via vertex texture lookups in VS 3.0. But it all depends on what developers use in games. If developers never use it, it is a useless feature. SM3.0 is an extension of SM2.0 and adds mostly performance enhancements, as well as possibly easier programming for developers. Again, it all depends on what the developers do, and we?ll stress again, SM3.0 versus SM2.0 image quality differences is really a non issue currently, and probably will be for this year of next-gen games.

The Bottom Line:

The X800Pro should be selling in major retail online outlets today, May 4th, and selling for an MSRP of $399. The X800XT Platinum Edition will begin shipping to retailers by May 21st and will be sold at an MSRP of $499. As usual, those MSRP prices will deflate somewhat quickly if the supply is available that ATI assurWhen it comes right down to it the X800Pro matches or beats the GeForce 6800Ultra in game performance and IQ. Compare the price, performance, and IQ of the ATI Radeon X800Pro with the GeForce 6800Ultra, and the X800Pro definitely stacks up as the better value than the 6800Ultra. NVIDIA is today launching an even higher clocked Ultra, no doubt in response to the X800XT-PE. We have yet to even see a retail 6800Ultra for any of the partners so currently I would consider these a non-issue. Also, a lower clocked 6800GT is being introduced but this card is simply not currnetly going to play in the same ballpark with the X800 series from ATI. TI. [/i][/b]

The Radeon X800XT Platinum Edition goes even further and burns through these games like a hot knife through butter, besting NVIDIA?s 6800Ultra by an easily noticeable real-world margin. If the flagship is what you want, be assured the ATI Radeon X800XT Platinum Edition was the top performer allowing us to play today?s demanding games at higher resolution and quality settings than any 3D graphics accelerator we have ever experienced.

Our Radeon X800 Series VPU Technology article is here for those of you that wish to know more about what is in the silicon.

While we realize that it is not likely that you will own two X800s, both are worthy of our "Must Have" award. The X800Pro and X800XT-Platinum Edition can both easily be called Must Have [Hardware] by the discerning gamer.

1083564189888Adk70te_10_2.gif

Link to comment
https://www.neowin.net/forum/topic/163813-the-x800-is-here/#findComment-2058864
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nice, hope they *finally* fixed the issue with the NTFS driver where the system would completely brick during large file copies using the built in driver. It's been broken for years requiring me to use the older, slower, NTFS-3G FUSE driver.
    • Windows 11 KB5094126 BSODing, freezing, forcing BitLocker lockout, breaks OneDrive, and more by Sayan Sen Microsoft released Windows 11 KB5094126 and KB5093998 last week as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. While Microsoft has so far not acknowledged any major problems with the release, some users online are running into problems. These range from OneDrive and Dropbox access issues, BitLocker recovery lockouts, to blue screens and BSODs. The most common one seems to be happening with HP systems wherein affected users say they hit 0xc0430001 BSOD (blue screen of death) error code after the KB5094126 update. We wonder if this could be related to the recent bug we covered on HP devices wherein the ongoing Secure Boot certificate updates are leading to similar issues. While we are not certain, users affected by this issue likely need to ensure that the boot.stl file is included on the installation media (such as a USB installer or ISO), if the above-mentioned dynamic updates are deployed. If this file is missing, computers may fail to boot from the installation media and could display the error 0xc0430001. This STL file is used by Secure Boot to verify that the boot files are trusted, so it must match the same Windows version and system architecture. To ensure the file is included, Microsoft recommends using the Update WinPE script, which automatically updates the image and handles the required files. Alternatively, you can manually copy the boot.stl file from the Windows\Boot\EFI folder on a Windows device and place it in the matching folder on your installation media before deploying the updated image. Aside from blue screening some users also note their systems have been freezing following the update. This could be happening to Lenovo PCs specifically. In the case of the OneDrive and Dropbox access issues, a user figured out that there could be a conflict with UAC. He explained: "Okay, so I did some digging, and in our environment KB5094126 breaks OneDrive and Dropbox in Explorer. I went through all our GPOs and found out that the combination of disabling UAC and having my user being a local admin breaks OneDrive in Explorer. ... If I enable UAC again, then it works, even with KB5094126 still installed." Hopefully, Microsoft will look into these issues. Source: Microsoft forum (link1, link2, link3, link4), Reddit (link1, link2, link3, link4)
    • It is when it's a desktop in my house though for a PC that's lightly used and not really important when it is. If it was a laptop, it would be a different story. The real solution is varied and begins starting at post #22 in that thread.
    • Win11Debloat 2026.06.14 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 2026.06.14 changes: This is a minor release that hopefully addresses the false positives in Windows Defender and Bitdefender that prevented users from downloading and/or running Win11Debloat. Refactor Get-RegFileOperations.ps1 to address false positives by @Raphire in #626 Add logging around WinGet app retrieval and increase timeout to 20s by @Raphire Download: Win11Debloat 2026.06.14 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!