• 0

Running Mac OS X on x86 PC!


Question

Recommended Posts

  • 0

I have pearpc running with os 10.2.

I downloaded the 10.2.8 combo upate.

How can I get this into my emulated harddrive so I can install it?

The file is called MacOSXUpdateCombo10.2.8.dmg

Is there a disk image utility that can read my harddrive image so I can add this file to it?

Please advise.

Thanks,

Brian Weber

  • 0
I have pearpc running with os 10.2.

I downloaded the 10.2.8 combo upate.

How can I get this into my emulated harddrive so I can install it?

The file is called MacOSXUpdateCombo10.2.8.dmg

Is there a disk image utility that can read my harddrive image so I can add this file to it?

Please advise.

Thanks,

Brian Weber

I used the Nero demo available at http://www.nero.com/en/ to create a data disk, add the .dmg file to the image and save it as an .iso. Then edit your config file to include the .iso file you made or click the "change disk" button in PearPC to have Mac OS load the CD.

You can then mount the .dmg file and start the upgrade as if you have a real CD in the drive. But, it seemed to freeze at the end of the upgrade for some reason leaving my hd file unbootable. Starting the install of OS X 10.2 over again. hehe. Hope you have more luck then I did.

  • 0

You don't need to use Darwin to install OS X. Read the guide here: http://www.emaculation.com/phpBB/viewforum.php?f=21

Install took me ~4 hours from download to finder+desktop. No problems. This is on my laptop (2.4Ghz, 512MB RAM, GeForce4 4200 Go)

screenshot: screenshot

  • 0

I think you guys are fulla $xxt!! :D

Just kidding, hey I got my install finally working, now my stupid change CD button doesnt work!! Go figure... I am hopeing by changing my .iso image in the config it will read it off of that. Yippy!

Unrealism

  • 0
Hahahaha

Just ignore Mxxcon.  He likes to **** in other people's cornflakes...    :laugh:

Oh, and if I'm not mistaken, Autumnmist is a lady, thus, no balls included...    :rofl:

Yes, Autumnmist is a lady (points to title below avatar). Thank you. :p

And by download I meant download PearPC and the pre-prepped disk image, *NOT* the OS X install disc (which, FYI were perfectly legal).

  • 0
Yes, Autumnmist is a lady (points to title below avatar). Thank you. :p

And by download I meant download PearPC and the pre-prepped disk image, *NOT* the OS X install disc (which, FYI were perfectly legal).

are you talking about an image of os x installed on say my machine (but not the install media) or is this 'pre-prepped' disk something else?

  • 0
are you talking about an image of os x installed on say my machine (but not the install media) or is this 'pre-prepped' disk something else?

Check out the Emaculation forums... There are some blank (as in no content) "disk images" --- essentially they're just blank .img files of a properly formatted hard drive that expand to fill ~3GB. This is what the OS X installer will write to when it installs. Otherwise you need to use the Disk Utility or Darwin to partition and format before installing.

*sigh*

Again, perfectly legal. This is why there's a fairly high success rate of getting this working over on the Emaculation forums. Using the pre-prepped disk image allows you to avoid a very time-consuming and error-prone process (patitioning and formatting what is essentially blank space).

Yeesh, just because some of you pirate things doesn't mean all the rest of us do too! Download != Download warez.

And just because I'm being helpful, here's "Install OS X 10.3" in 20 steps: tutorial.

Edited by Autumnmist
  • 0

I'm having trouble with my CD command in my config file.

I can only boot my HD image when I comment out the CD image.

I booted my HD image successfully with an .iso image yesterday, so I don't understand this.

Anyone else having this problem, and know of a solution?

thanks

  • 0

All I can say is it is about fricken time!! For some reason I got it working this way and dont know why it mattered.

1. Started a fresh image.

2. Partitioned with Darwin (ppc.exe ppccfg.darwin)

3. Did not install Darwin this time!!

4. Booted OSX 10.2 image. (ppc.exe ppccfg.osx)

5. No disk showed up in the OSX install so I opened up Disk Manager.

6. Partitioned with OSX.

7. Formated drive with OSX, and started install.

8. Rebooted PearPC (My Change CD button would not work so I changed my image in the ppccfg.osx to osx2.iso)

9. Finished install of second disk. (Note: It seems to go into a sleep mode if you do not keep the mouse active, anyone else have this problem??)

10. After gruleing hours of staying awake to keep moving the silly mouse!

11. TaDA!!!!!!! :D :D :D

Anyone know why I am showing 128mb Ram in the OSX 10.2 System Info?? I am running 512Mb. Anyway to change this to boost performance perhaps??

Also has anyone installed Darwin and got OSX to boot? That is one of the things why I think I was getting the boot screen to hang w/ slashed circle!!

Cheers, and thank you all!!

--------------------------------------------------------------------------------------------

post-11-1084721056.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AMD RX 9070 GRE AI, Blender benchmarks vs 9070 XT, 7800XT, Nvidia RTX 5070, 4070 by Sayan Sen Earlier this week, we shared the first part of our review of AMD's new RX 9070 GRE. It was about the gaming performance of the GPU, and we gave it an 8 out of 10. As a follow-up, similar to how we did with the 9070 XT and non-XT, we are doing a dedicated productivity review for the RX 9070 GRE as well, where we compare it against the 9070 XT, 9070, 7800 XT, as well as Nvidia's 5070 and 4070. This will include AI, rendering, compute, and more benchmarks. AI performance, especially, is a very important metric in today's world, and AMD also promised big improvements thanks to its underlying architectural improvements. We will be pitching it against the data we already have for the RX 9070, and RX 9070 XT, but also the Nvidia 5070 FE, MSI GeForce RTX 4070 VENTUS 2X 12G, and Gigabyte Radeon RX 7800 XT GAMING OC 16G as they are in a similar price class, but also because we do not have a comparable 5060 Ti card lying around here that we can compare it against. Before we get underway, this is a collaboration between Sayan Sen and Steven Parker, who lent me his test bed. Also, there was no editorial input from AMD. First up, the specs of the RX 9070, 9070 XT, and 9070 GRE, which were given to us by AMD: Radeon RX 9070 GRE Radeon RX 9070 Radeon RX 9070 XT Boost Clock: Game Clock: up to 2.79GHz up to 2.20GHz up to 2.52GHz up to 2.07GHz up to 2.97GHz up to 2.40GHz Stream Processors 3,072 (48 CU) 3,584 (56 CU) 4,096 (64 CU) Ray Accelerator 48 56 64 AI Accelerator 96 112 128 ROPs 96 128 Texture Mapping Units 192 224 256 Memory 12 GB GDDR6, 18Gbps Clock, 192-bit Bus 432 GB/s 16 GB GDDR6, 20Gbps Clock, 256-bit Bus Effective Memory Bandwidth: 640 GB/s Infinity Cache 48 MB (3rd Gen) 64 MB (3rd Gen) Card Bus PCI-E 5.0 X16 Output 2x HDMI 2.1b 2x DisplayPort 2.1a Power consumption 220W 304W Recommended PSU 650W 750W Slot width 2x 3x Price (SEP) $549 $599 As you can see from the specs above, it is less than the standard RX 9070 in every way that counts, except for slightly higher Boost and Game clock speed. Design Moving on, the RX 9070 GRE we were given is an XFX Swift triple-fan, dual-slot design with two 8-pin connectors. At 30cm (self-measured), it will fit in most systems easily. There is no RGB either. The AMD Radeon RX 9070 GRE by XFX from all angles. Test system Our test system consists of the following: Lian Li O11 Dynamic Mini V2 Flow (Amazon|Newegg) ASUS Z890 ProArt Creator WiFi (Amazon|Newegg) Intel Core Ultra 7 270K Plus (Amazon|Newegg) Thermal Grizzly KryoSheet - 44x37 (Amazon|Newegg) 2x 16GB G.Skill Trident Z5 RGB (7200 MT/s in XMP) (Amazon|Newegg) Sabrent Rocket4 Plus 2TB SSD (Amazon) Windows 11 25H2 (Build 26200.8246) AMD shared a press driver based on the recently released Adrenaline 26.5.2 that we were required to use. We now move on to our benchmarks. First up, we have Geekbench AI running on ONNX. For some reason, the 9070 GRE does exceptionally well here in both half-precision (FP16) and single-precision (FP32). It manages to beat the RTX 5070 and RX 9070 non-XT, and is only behind the 9070 XT. Since Geekbench runs in short bursts instead of continuously hammering the graphics card, it seems the GRE's faster boost clocks are helping here. Next up, we move to the UL Procyon AI test suite, starting with the image generation benchmark. We chose the Stable Diffusion XL FP16 test since it is the most intense workload available on Procyon. The Nvidia cards do very well here, as even the 4070 out-muscles AMD's best fairy easily. The positive thing about the GRE is that it gets quite close to the 9070 non-XT in this test; this indicates that the VRAM does not play a very big role here, as SD XL relies on float16 (FP16). So this is something to keep in mind again. If you wish to work with float32 AI workloads, graphics cards with larger than 12 GB buffers would likely emerge as victors. Regardless, the gains are still massive on AMD's 9000 series compared to the 7000 series. Following image generation, we move to the text generation benchmark. This is one test where the 9070 GRE struggled, quite a lot. It seems that the 12 GB VRAM and lower memory bandwidth of the new Radeon 9070 GRE are hurting it quite a bit; the split is massive, especially in a test like Llama2, which packs 13 billion parameters. As such, in all the tests, the 9070 GRE is the slowest of the lot. Next, we tried Blender, and here the AMD GPUs were beaten by Nvidia. Rendering is something the Green team has always had a lead over the Red side, and it has not changed so far. On the positive side, though, the 9070 GRE shows significantly better results than the 7800 XT, which means AMD is on the right path. Catching up to Nvidia, though, will require a lot more effort. And we hope HIP and ROCm can keep improving. Wrapping up AI testing, we measured OpenCL throughput in the Geekbench compute benchmark. The RX 9070 GRE alongside the 9070 did not fare well here at all, even falling behind the 7800 XT. Interestingly, even the RTX 5070 could not beat the 4070 on OpenCL, so perhaps this suggests that OpenCL optimization may not have been a priority for either AMD or Nvidia in the modern era. Conclusion We reached the end of our productivity performance review of the 9070 GRE, and we have to say it's a mixed bag. Unlike the 9070 and 9070 XT, the GRE excels in some areas while losing ground fairly easily in others. Similar to how it happened in gaming, any time the card's memory subsystem gets hammered, it tends to fall behind the others. This was the case with text generation, wherein we saw the VRAM sometimes hit its maximum available 12 GB of usage with larger model sizes. So what do we make of the RX 9070 as a productivity hardware? It can certainly be used, but you have to know it has its limitations. For those looking for a GPU that can deal with more, AMD recently unveiled the Radeon AI PRO R9700, which is essentially a 32 GB refresh of the 9070 XT with some additional workstation-based optimizations. On a similar note, the new Ryzen AI Halo platform is something you can consider if you want to set up a local AI processing station. Considering everything, we rate AMD's Radeon RX 9070 GRE a 7.5 out of 10 for its productivity performance. Price is less of a factor for those looking at productivity cases compared to those considering the GPU for gaming, and as such, we felt it did quite decently on many occasions and can be handy if you need a 12 GB GPU and, for some reason, don't want to get Nvidia. Purchase links: RX 9070 / XT / GRE (Amazon US) As an Amazon Associate, we earn from qualifying purchases.
    • Does anyone here know if these updates are integrated into the UUP dump isos?
    • Motrix Next 3.9.4 by Razvan Serea Motrix Next is a modern, open-source cross-platform download manager built as the official next-generation successor to the original Motrix project. It has been completely rewritten using Tauri 2, Vue 3, TypeScript, and Rust, while still relying on the powerful Aria2 download engine for high-speed multi-protocol transfers. The app supports HTTP, HTTPS, FTP, BitTorrent, ED2K and magnet links, offering advanced features like multi-connection acceleration, task scheduling, bandwidth control, and batch download management. With a significantly reduced install size (around 20MB), it focuses on being lightweight, fast, and resource-efficient compared to traditional Electron-based download tools. Designed for Windows, macOS, and Linux, Motrix Next delivers a clean, modern UI inspired by Material Design 3 principles, with smooth animations and a minimal workflow. It improves usability through better download organization, system tray integration, and enhanced torrent handling including selective file downloads and tracker management. Motrix Next features: Multi-protocol downloads — HTTP, FTP, BitTorrent, Magnet, .torrent, ED2K, and Metalink tasks BitTorrent — Selective file download, DHT, peer exchange, encryption controls, metadata caching, GeoIP peer flags, and tracker probing Browser extension integration — Embedded Extension API with independent authentication, download confirmation, smart auto-submit, filename hints, referer/cookie forwarding, and real-time controls (Chrome Web Store · Edge Add-ons) Safe filename handling — Content-Disposition, RFC 2047, non-UTF-8, percent-encoded, and extensionless URL resolution with path traversal sanitization Download organization — Favorite and recent folders, optional file-type categorization, stale-record cleanup, and completed history backed by SQLite Concurrent downloads — Independent controls for active tasks, HTTP connections per server, segments per file, and BT peer limits Speed control — Global and per-task upload/download limits with day-of-week and time-of-day scheduling System integration — Tray operation, optional tray speed display, macOS Dock badge/progress, protocol handlers for magnet://, thunder://, and motrixnext:// Lightweight mode — Destroys the WebView on minimize-to-tray while Rust keeps the engine, task monitor, notifications, history, and extension routing alive Notifications and power options — Native task start/complete/failure notifications, keep-awake during downloads, and optional shutdown after completion Network controls — Scoped proxy support for downloads, app updates, and tracker updates, plus system proxy detection Auto-update channels — Stable, Beta, and Latest Across Channels policies with separate download and install phases Diagnostics — Structured logs, exportable diagnostic ZIPs, database integrity checks, automatic DB rebuild, and Linux GPU rendering fallback Personalization — Light/dark/system theme, 10 color schemes, 26 languages, and first-launch system language detection Motrix Next 3.9.4 changelog: Motrix Next 3.9.4 promotes the 3.9.4 beta cycle to stable. This release refreshes bundled engine binaries, improves task detail readability and copy actions, expands link handling for magnet and ED2K workflows, polishes responsive navigation and text wrapping, updates browser extension documentation, and refines network preference controls. New Features Task Detail copy actions — Added copyable values for task metadata and reusable render functions for long text fields. Magnet and ED2K lifecycle support — Added task lifecycle handling for magnet and ED2K links. History cleanup for deleted tasks — Deleted tasks can now remove matching history records. User-Agent management — Added user-agent management and improved related network preference controls. Browser extension documentation — Added the Firefox Add-ons link for the Motrix Next extension. Improvements Engine binaries — Updated bundled binaries for supported architectures. Task Detail readability — Long task names, URLs, tracker values, and copyable metadata now render more clearly. Deletion messaging — Refined localized task deletion text for clarity and consistency. Text wrapping — Improved URI input wrapping and task name multiline display. Navigation layout — Improved sub-navigation responsiveness. Disk allocation default — Changed the default file allocation method to trunc. Proxy controls — Improved proxy button styling in network preferences. Download: Motrix Next 64-bit | ARM64 | macOS ~20.0 MB (Open Source) Links: Website | macOS / Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • NVIDIA officially supports Ubuntu, as linked above with the GeForce NOW Hands on I did in collaboration with Paul Hill.
    • TO be clear I am not running linux today, however I keep thinking about it. And I want to make sure there are minimal obstacles if I decide to make that switch in the coming months.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      244
    3. 3
      Steven P.
      72
    4. 4
      FloatingFatMan
      66
    5. 5
      +Edouard
      66
  • Tell a friend

    Love Neowin? Tell a friend!