• 0

Running Mac OS X on x86 PC!

Asked by S.MULLA,

 Share

Question

3213 answers to this question

Recommended Posts

  • 0
Grand Master

the evn show

Posted
Posted
if x200 is 512 mb's of ram, what would 1024 mb's of ram be in binary?

Why not ask google? She'll tell you it's 0x400

By the by: 0x200 is Hex, 0x200 = 512, typically you'll prefix binary numbers with "0b" and hexidecimal numbers with "0x", base 10 numbers are typically just written as is.

  • 0
Veteran

Fonze

Posted
Posted
The thread seems to be becoming nothing more than a big advert for Bit Torrent :no:

After all this how many of you would seriously consider getting a Mac, rather than all this messing around :wacko:

I was considering getting a used G3 or G4 just to be able to screw arround on a mac, but now i don't have to.

the install was really easy and didn't take very long. It's slow, but i know that will change.

  • 0
Grand Master

TheLegendOfMart

Posted
Posted
The thread seems to be becoming nothing more than a big advert for Bit Torrent :no:

After all this how many of you would seriously consider getting a Mac, rather than all this messing around :wacko:

Me, i was looking at getting a cheap G3 Snow Ibook to break me in to OSX, then maybe a better mac at some point down the line, just trying to install it now on PPC

  • 0
Explorer

jedavis1

Posted
Posted
The thread seems to be becoming nothing more than a big advert for Bit Torrent  :no:

After all this how many of you would seriously consider getting a Mac, rather than all this messing around  :wacko:

Why is it that so many people think that every one here is into warez and illegally copying software? I happen to own a G5, tiBook and a Beige Beauty... and I have still put hours/days into getting this to run and trying to help others. No illegal software! The pure geek-ness of running OS X on x86 architecture is the reason for it...

I have been following Mac on PC emulation since 93 or 94 when Executor Dos first came out, since then Basilisk II, Softmac, Fusion PC, vMac and a few others have came out... Why is it that people can't see this as a Hobby for many and inspiration that it can actually be done?

Anyone remember Mt. Everest? Why in the heck somebody would want to risk death... because it's there.

As someone who has been accused of warez/pirating... please lay off and stick to topic of helping/fine tuning this inspirational achievement.

  • 0
Experienced

misecia

Posted
Posted

I admit that its a good advert for the Mac, but who would really go out and spend $150 on an operating system not designed for their system and hence probably won't work, or would spend hours/days trying to get it working only to get fed up of it after a few days...??

  • 0
Grand Master

S.MULLA

Posted
  • Author
Posted
Why is it that so many people think that every one here is into warez and illegally copying software? I happen to own a G5, tiBook and a Beige Beauty... and I have still put hours/days into getting this to run and trying to help others. No illegal software! The pure geek-ness of running OS X on x86 architecture is the reason for it...

I have been following Mac on PC emulation since 93 or 94 when Executor Dos first came out, since then Basilisk II, Softmac, Fusion PC, vMac and a few others have came out... Why is it that people can't see this as a Hobby for many and inspiration that it can actually be done?

Anyone remember Mt. Everest? Why in the heck somebody would want to risk death... because it's there.

As someone who has been accused of warez/pirating... please lay off and stick to topic of helping/fine tuning this inspirational achievement.

well said.. :yes:

  • 0
Collaborator

five04

Posted
Posted
the isntalltion went fine but when i wen to boot it, i get this error, help plz?

10. Go into your config file and change the "prom_env_machargs" to read "-s". Thats SMALL s, not capital s. Obviously if the line is commented out, remove the # so it works. Boot the machine from the CD again as before. This eventually leaves you with the shell/command prompt, and we're about to tackle the job that Darwin would've been used for if it were needed. Type "pdisk" to start the partition tool.

11. Type "e" (without quote marks) then hit enter.

12. For name of device enter "/dev/disk0". Again, no quote marks.

13. Press "p" to view the partition table. The 3rd one actually needs to be moved up to 2 to make it bootable. So...

14. Press "r" to go into partition reordering mode.

15. Enter the number of that partition (3).

16. Enter 2 to move it to the second position.

17. Hit w to write the partition table, check it using p again if you want to confirm it is all okay.

18. Hit q to quit, then hit it again.q. Type reboot which will close PearPC.

19. Go into the config file and comment out the "prom_env_machargs", which will leave the standard mac bootup screen rather than the verbose mode when you now restart PearPC.

i had this problem on just the last page. dazzla helped me out.

  • 0
Grand Master

Redestium

Posted
Posted
I admit that its a good advert for the Mac, but who would really go out and spend $150 on an operating system not designed for their system and hence probably won't work, or would spend hours/days trying to get it working only to get fed up of it after a few days...??

That?s not the case for everyone, taking this thread as evidence.

  • 0
Grand Master

Dazzla Veteran

Posted
  • Veteran
Posted

Nice one, judging an OSX from a buggy, super slow emulator which has no real representation of the OS in use at all. Genious, give that guy an award!

Back OT, wouldn't something like an A64 cope better with the emulation because of it's extra registers?

  • 0
Explorer

jedavis1

Posted
Posted

I have a video question?

Is the video.x file really needed in Windows? or is it a Linux only driver?

I was experimenting with settings a while ago and commented it out, and forgot about it... I have 10.2.8 installed and running without any trouble... It is slow, but I haven't noticed a difference with it.

Just askin'

Jon

  • 0
Mentor

AquaFX

Posted
Posted
10. Go into your config file and change the "prom_env_machargs" to read "-s". Thats SMALL s, not capital s. Obviously if the line is commented out, remove the # so it works. Boot the machine from the CD again as before. This eventually leaves you with the shell/command prompt, and we're about to tackle the job that Darwin would've been used for if it were needed. Type "pdisk" to start the partition tool.

11. Type "e" (without quote marks) then hit enter.

12. For name of device enter "/dev/disk0". Again, no quote marks.

13. Press "p" to view the partition table. The 3rd one actually needs to be moved up to 2 to make it bootable. So...

14. Press "r" to go into partition reordering mode.

15. Enter the number of that partition (3).

16. Enter 2 to move it to the second position.

17. Hit w to write the partition table, check it using p again if you want to confirm it is all okay.

18. Hit q to quit, then hit it again.q. Type reboot which will close PearPC.

19. Go into the config file and comment out the "prom_env_machargs", which will leave the standard mac bootup screen rather than the verbose mode when you now restart PearPC.

i had this problem on just the last page. dazzla helped me out.

i didn't use darwin

  • 0
Collaborator

five04

Posted
Posted

so? you don't have to use darwin. that's the whole point of this. it boots up off the install cd of os x into a command line environment where you do all this.

also in the first step listed there it says "and we're about to tackle the job that Darwin would've been used for if it were needed."

  • 0
Explorer

niteowl

Posted
Posted
I have a video question?

Is the video.x file really needed in Windows? or is it a Linux only driver?

I was experimenting with settings a while ago and commented it out, and forgot about it... I have 10.2.8 installed and running without any trouble... It is slow, but I haven't noticed a difference with it.

Just askin'

Jon

You're running OS X without the video.x file? Hmmm..

According to this

http://pearpc.sourceforge.net/config.html

There is something in the config file called

prom_driver_graphic which has a value of "video.x"

A special graphic driver prom should load. ("video.x" if you want to boot Mac OS X)

In Linux, it wouldn't let me try to install OS X or Darwin without the video.x file.

  • 0
Grand Master

KeR

Posted
Posted
Nice one, judging an OSX from a buggy, super slow emulator which has no real representation of the OS in use at all. Genious, give that guy an award!

Back OT, wouldn't something like an A64 cope better with the emulation because of it's extra registers?

I have tried the real thing before, never did liked it the only thing PearPC did today is affirm this!

  • 0
Neowinian

particleWave

Posted
Posted

Does anyone know if PearPC is faster in Linux than in windows?

I am going to install it on my Fedora box tonight and check, so I'll

post my findings later.

Thanks to everyone in this thread for all their help getting this cool

software up and running.

...well almost everyone, hehe...

  • 0
Grand Master

Redestium

Posted
Posted
Does anyone know if PearPC is faster in Linux than in windows?

I am going to install it on my Fedora box tonight and check, so I'll

post my findings later.

Thanks to everyone in this thread for all their help getting this cool

software up and running.

...well almost everyone, hehe...

Yeah, that'd be an interesting test.

  • 0
Explorer

niteowl

Posted
Posted

I'm installing Mac OS X (using PearPC) on a Red Hat Enterprise Linux box.

The install is a tiny bit faster than it was in Windows and it seems to be more stable too.

I'll have to run the OS when it finishing installing to make a more accurate analysis about it's condition.

post-11-1084832739.jpg

This topic is now closed to further replies.
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.