• 0

Running Mac OS X on x86 PC!

Asked by S.MULLA,

 Share

Question

3213 answers to this question

Recommended Posts

  • 0
Grand Master

uniacid

Posted
Posted
wouldsomeone please help me with this...

10. Go into your config file and change the "prom_env_machargs" to read "-s". Thats SMALL s, not capital s. Obviously if the line is commented out, remove the # so it works. Boot the machine from the CD again as before. This eventually leaves you with the shell/command prompt, and we're about to tackle the job that Darwin would've been used for if it were needed. Type "pdisk" to start the partition tool.

11. Type "e" (without quote marks) then hit enter.

12. For name of device enter "/dev/disk0". Again, no quote marks.

13. Press "p" to view the partition table. The 3rd one actually needs to be moved up to 2 to make it bootable. So...

14. Press "r" to go into partition reordering mode.

15. Enter the number of that partition (3).

16. Enter 2 to move it to the second position.

17. Hit w to write the partition table, check it using p again if you want to confirm it is all okay.

18. Hit q to quit, then hit it again.q. Type reboot which will close PearPC.

19. Go into the config file and comment out the "prom_env_machargs", which will leave the standard mac bootup screen rather than the verbose mode when you now restart PearPC.

  • 0
Mentor

Detroit

Posted
Posted
It feels like a P200-300 running XP with all it's effects on, so it's sluggish, but not unbearable. And no it doesn't take 3 seconds for the cursor to move, it's instant for me, I've allocated 512mb for PearPC as well. I've installed a few themes, installed Windowshade X and just installed iTunes 4.5:

http://homepage.ntlworld.com/sherry.ponting/Junk/PearPC3.jpg

Do you have internet?

  • 0
Mentor

AquaFX

Posted
Posted
10. Go into your config file and change the "prom_env_machargs" to read "-s". Thats SMALL s, not capital s. Obviously if the line is commented out, remove the # so it works. Boot the machine from the CD again as before. This eventually leaves you with the shell/command prompt, and we're about to tackle the job that Darwin would've been used for if it were needed. Type "pdisk" to start the partition tool.

11. Type "e" (without quote marks) then hit enter.

12. For name of device enter "/dev/disk0". Again, no quote marks.

13. Press "p" to view the partition table. The 3rd one actually needs to be moved up to 2 to make it bootable. So...

14. Press "r" to go into partition reordering mode.

15. Enter the number of that partition (3).

16. Enter 2 to move it to the second position.

17. Hit w to write the partition table, check it using p again if you want to confirm it is all okay.

18. Hit q to quit, then hit it again.q. Type reboot which will close PearPC.

19. Go into the config file and comment out the "prom_env_machargs", which will leave the standard mac bootup screen rather than the verbose mode when you now restart PearPC.

Thank you if i was there i would make sweet love to u =P =)

  • 0
Mentor

amr_01

Posted
Posted

i tried to apply the 10.3.3 Combo Update, and it failed while doing so. Now when i try to load OSX i just get the grey screen with the apple logo, and the spinning thing. It used to take only a few seconds on that screen, now i have left it for more then 15min with nothing. :( looks like i am going to have to start over again.

  • 0
Neowinian

Josta2317

Posted
Posted

WHOA. Ok. I noticed that everyone has a "Change CD" button in their output window and I must honestly admit that I lack such a visible clickable object. In other words, my ENTIRE output window is blank! Nothin there! I can click where that "Change CD" button ought to be, and a dialog box will pop up. However, I can't see the button that I'm clicking on. Any thoughts? Furthermore there is never any output even though there should be, in either darwin or os x.

John

  • 0
Mentor

Starman

Posted
Posted
Would it be worth it to try running this on my 2.8ghz p4? I don't want to bother if I have to wait for just the mouse to move around... :p

I'm running it on a 2.53GHz P4 and it's slow, but not THAT slow.

People seem to be posting their experiences without posting system specs. Bad.

Mike

This topic is now closed to further replies.
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • MakeMKV 1.18.4 Beta

      By +Eternal Tempest · Posted

      Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault

      By hellowalkman · Posted

      Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • Microsoft announces 12th-gen Surface Pro with Snapdragon X2 processors

      By cleverclogs · Posted

      It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0

      By Copernic · Posted

      Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You pay just $100 per TB with this rare 4TB PCIe Gen4 NVMe SSD deal

      By hellowalkman · Posted

      lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026

  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!