• 0

Running Mac OS X on x86 PC!

Asked by S.MULLA,

 Share

Question

3213 answers to this question

Recommended Posts

  • 0
Grand Master

uniacid

Posted
Posted
wouldsomeone please help me with this...

10. Go into your config file and change the "prom_env_machargs" to read "-s". Thats SMALL s, not capital s. Obviously if the line is commented out, remove the # so it works. Boot the machine from the CD again as before. This eventually leaves you with the shell/command prompt, and we're about to tackle the job that Darwin would've been used for if it were needed. Type "pdisk" to start the partition tool.

11. Type "e" (without quote marks) then hit enter.

12. For name of device enter "/dev/disk0". Again, no quote marks.

13. Press "p" to view the partition table. The 3rd one actually needs to be moved up to 2 to make it bootable. So...

14. Press "r" to go into partition reordering mode.

15. Enter the number of that partition (3).

16. Enter 2 to move it to the second position.

17. Hit w to write the partition table, check it using p again if you want to confirm it is all okay.

18. Hit q to quit, then hit it again.q. Type reboot which will close PearPC.

19. Go into the config file and comment out the "prom_env_machargs", which will leave the standard mac bootup screen rather than the verbose mode when you now restart PearPC.

  • 0
Mentor

Detroit

Posted
Posted
It feels like a P200-300 running XP with all it's effects on, so it's sluggish, but not unbearable. And no it doesn't take 3 seconds for the cursor to move, it's instant for me, I've allocated 512mb for PearPC as well. I've installed a few themes, installed Windowshade X and just installed iTunes 4.5:

http://homepage.ntlworld.com/sherry.ponting/Junk/PearPC3.jpg

Do you have internet?

  • 0
Mentor

AquaFX

Posted
Posted
10. Go into your config file and change the "prom_env_machargs" to read "-s". Thats SMALL s, not capital s. Obviously if the line is commented out, remove the # so it works. Boot the machine from the CD again as before. This eventually leaves you with the shell/command prompt, and we're about to tackle the job that Darwin would've been used for if it were needed. Type "pdisk" to start the partition tool.

11. Type "e" (without quote marks) then hit enter.

12. For name of device enter "/dev/disk0". Again, no quote marks.

13. Press "p" to view the partition table. The 3rd one actually needs to be moved up to 2 to make it bootable. So...

14. Press "r" to go into partition reordering mode.

15. Enter the number of that partition (3).

16. Enter 2 to move it to the second position.

17. Hit w to write the partition table, check it using p again if you want to confirm it is all okay.

18. Hit q to quit, then hit it again.q. Type reboot which will close PearPC.

19. Go into the config file and comment out the "prom_env_machargs", which will leave the standard mac bootup screen rather than the verbose mode when you now restart PearPC.

Thank you if i was there i would make sweet love to u =P =)

  • 0
Mentor

amr_01

Posted
Posted

i tried to apply the 10.3.3 Combo Update, and it failed while doing so. Now when i try to load OSX i just get the grey screen with the apple logo, and the spinning thing. It used to take only a few seconds on that screen, now i have left it for more then 15min with nothing. :( looks like i am going to have to start over again.

  • 0
Neowinian

Josta2317

Posted
Posted

WHOA. Ok. I noticed that everyone has a "Change CD" button in their output window and I must honestly admit that I lack such a visible clickable object. In other words, my ENTIRE output window is blank! Nothin there! I can click where that "Change CD" button ought to be, and a dialog box will pop up. However, I can't see the button that I'm clicking on. Any thoughts? Furthermore there is never any output even though there should be, in either darwin or os x.

John

  • 0
Mentor

Starman

Posted
Posted
Would it be worth it to try running this on my 2.8ghz p4? I don't want to bother if I have to wait for just the mouse to move around... :p

I'm running it on a 2.53GHz P4 and it's slow, but not THAT slow.

People seem to be posting their experiences without posting system specs. Bad.

Mike

This topic is now closed to further replies.
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Classic Outlook vs New Outlook — Which one do you prefer and why?

      By cooky560 · Posted

      Classic outlook, not only does it have a much fuller feature set, it doesn't include Microsoft attempting to sync my emails from my servers to theirs. If classic outlook is ever removed from office, and the version I paid for in 2021 stops working for some reason, I'll use Thunderbird.
    • Kdenlive 26.04.2

      By Copernic · Posted

      Kdenlive 26.04.2 by Razvan Serea Kdenlive is an acronym for KDE Non-Linear Video Editor. It works on GNU/Linux, Windows and BSD. Through the MLT framework, Kdenlive integrates many plugin effects for video and sound processing or creation. Furthermore Kdenlive brings a powerful titling tool, a DVD authoring (menus) solution, and can then be used as a complete studio for video creation. Kdenlive supports all of the formats supported by FFmpeg or libav (such as QuickTime, AVI, WMV, MPEG, and Flash Video, among others), and also supports 4:3 and 16:9 aspect ratios for both PAL, NTSC and various HD standards, including HDV and AVCHD. Video can also be exported to DV devices, or written to a DVD with chapters and a simple menu. Video editing features: Multi-track editing with a timeline and supports an unlimited number of video and audio tracks. A built-in title editor and tools to create, move, crop and delete video clips, audio clips, text clips and image clips. Ability to add custom effects and transitions. A wide range of effects and transitions. Audio signal processing capabilities include normalization, phase and pitch shifting, limiting, volume adjustment, reverb and equalization filters as well as others. Visual effects include options for masking, blue-screen, distortions, rotations, colour tools, blurring, obscuring and others. Configurable keyboard shortcuts and interface layouts. Rendering is done using a separate non-blocking process so it can be stopped, paused and restarted. Kdenlive also provides a script called the Kdenlive Builder Wizard (KBW) that compiles the latest developer version of the software and its main dependencies from source, to allow users to try to test new features and report problems on the bug tracker. Project files are stored in XML format. An archiving feature allows exporting a project among all assets into a single folder or compressed archive. Built-in audio mixer Kdenlive 26.04.2 changelog: Remove not needed actions from render info, fix rough size calculation for rendering. Fix clip sometimes not inserted in timeline when moving vertically in bin drag. Fix transcoding from clip properties. Cleanup render profile audio quality. Use percent based value for audio quality, and adjust the range accordingly per codec. Fixes bug #520750 Enforce even numbers for render width/height. Fixes bug #520737 Fix nightly flatpak - disable rnnoise until implemented. Fix missing initialization. Edit mediacapture.cpp. Fix document unnecessarily marked as modified on opening, triggering a backup request. Fix incorrect detection of missing and remote clips causing unwanted backups. Fixes issue #2194 Fix tests. Fix tmp files copied to wrong location when setting project folder. Fixes bug #467740 Fix color clips not selected on creation. Use QFileInfo instead of QUrl/QDir to try fixing Windows shared drives. Fixes bug #451413 Fix timeline preview incorrectly invalidated when a track with effect duration changed. Fixes bug #514541 Fix missing var. Display paths in native format in render widget. Fixes bug #520428 Simple splash: fix pressing return always triggered the same button. Minor update to simple splash. Fix unwanted clips added to timeline and cleanup. Fixes issue #2190 Minor layout improvements to welcome screen, add Quit and Open shortcuts. Fix broken welcome dialog layout in tiling compositors. (craft) Limit the number of CPU cores used during a Windows build with mingw as some .cpp files are memory intensive to build. (kde-ci) Limit the number of CPU cores used during a build as some .cpp files are memory intensive to build. (kde-ci) Cleanup old entries. Another fix for animation crash. Fix uninitialized function - crash on create animation. Another attempt to fix MacOS permissions. MacOS: fix bundle release version. Fix MacOS plist path. Fix MacOS build. Explicitely link against Qt::Core. Download: Kdenlive 26.04.2 | 128.0 MB (Open Source) Download: Standalone Executable View: Kdenlive Home page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Here's how to watch the Xbox Games Showcase today and what to expect

      By LoneWolfSL · Posted

      Here's how to watch the Xbox Games Showcase today and what to expect by Pulasthi Ariyasinghe The June games showcase week has been a packed one, with everything from major presentations like Sony and Summer Game Fest to indie-focused reveals coming in almost every day. Now, it's almost time for another big one, with Microsoft bringing its Xbox Games Showcase back later today. This is a double feature too, with a Gears of War E-Day deep dive also being attached to it. For anyone wanting to tune in online, the 2026 Xbox Games Showcase is kicking off at 10 AM PT | 1 PM ET | 6 PM BST | 7 PM CEST later today, June 7. The event will be available to watch on the official Xbox YouTube (4K 60FPS), Twitch, Facebook, Steam, Amazon Live, and other portals. Separate livestreams for American Sign Language and Audio Description will also be available. "This year marks 25 years of XBOX, and this Showcase is poised to be a true celebration, offering world premieres, new gameplay, fresh updates, and more for a swathe of projects we cannot wait to share," said Microsoft about this presentation. With a new CEO behind it that is pulling off some interesting moves, Xbox may have some surprises to reveal today. New looks at first-party games like Halo Campaign Evolved from Halo studios, Fable from Playground Games, InXile Entertainment's Clockwork Revolution, Mojang's Minecraft Dungeons II, and Call of Duty: Modern Warfare 4 from Infinity Ward are to be expected here. We may finally get to see the new Blade from Arcane Studios in action and a new Persona game from Atlus at the showcase too. Surprise announcements may also arrive from other Microsoft-owned studios like Bethesda, MachineGames, Ninja Theory, Obsidian, Rare, World's Edge, or Blizzard. Considering how every new release nowadays is staying away from November and December to avoid Grand Theft Auto VI's release, any launch dates Microsoft announces will probably skip those months as well. Once the Xbox Games Showcase ends, Microsoft will immediately kick off the Gears of War: E-Day Direct. This deep dive into the upcoming prequel from The Coalition should attach gameplay footage and perhaps a release window to the highly anticipated project.
    • This could exactly be how our Sun ends but it's not as simple

      By PeterTHX · Posted

      People in the '50s and '60s had the same attitude, and we're still here over a half century later.
    • 007 First Light review: Satisfying spy adventure that James Bond needed

      By Nick H. · Posted

      So after some fiddling I was able to get it to run at a pretty stable 30FPS. I'm slightly surprised about how much fiddling I had to do to get there though given what I thought was reasonable hardware: Processors: 16 × AMD Ryzen 7 7840HS w/ Radeon 780M Graphics Memory: 16 GiB of RAM Graphics Processor 1: AMD Radeon 780M Graphics Graphics Processor 2: AMD Radeon RX 7700S I think I could do it better if I use Linux rather than Windows, Windows RAM usage is stupid without stripping the system down. But once I got it working in a reasonable state, it was so awesome! I felt like a new Bond! If anyone has any advice to get things going a bit smoother FPS-wise, I'd appreciate it.

  • Recent Achievements

    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      PsYcHoKiLLa
      256
    3. 3
      Steven P.
      74
    4. 4
      +Edouard
      70
    5. 5
      FloatingFatMan
      69
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!