Intellipoint 4.01 problems


Recommended Posts

You say the problem continues after uninstalling so it would be wise to check your pyshical cables and if you are using an Optical mouse then you should check that there is no fluff or hairs in front of the laser as this can cause "locks" and erratic movement.

If that fails and you are using USB you might want to change the actual socket it's plugged into.

If all this fails then it might be an OS problem so if you haven't disabled System Restore load it up and restore to a point before the problems started.

hey man...

get yourself an old serial/ps2 mouse. totally remove your MS mouse and start your machine up with a new/old style mouse. make sure all the drivers/software are out of your machine with the old mouse attached.

reboot a few times, and make sure ONE of those reboots is in safe mode.

after 3-4 reboots, plug that USB mouse back in and reinstall your ORIG. drivers, and you'll be good to go.

Kosmo

hehehe - I've had no problems with it at all :rambo: with the mouse you should of had a USB to PS2 convertor jack, try that. if everything fails, uninstall all the mouse drivers from the "Add Remove Programs Menu", reboot, and see if the plug 'n' play usb picked it up.

If this fails, then maybe it's your mouse physically with a problem.

Can you please explain why do you need to reboot a few time and have to reboot into safemode? Rebooting once with PS2 mouse attached should make Windows forgets about Intelli Mouse and use PS2 driver (I hope), what's the point in rebooting into safemode? :s

heres why you want to reboot into safe mode.

when you boot up your computer, windows logs everything that it does on a correct bootup. if you have no hardware/software changes, it will boot exactly the same way it did last time. if you take it up in safemode however, it loads no drivers, firmware, or many startup stuff. on the next boot, it then creates a new, good log for the next few boots. also, windows can repair itself as it boots up into safe more...ive seen this more than a few times.

kosmo

I have done a re-install of my OS (it needed it anyways...) and still have the problem. I figured out what it is, and it that the red LED on the underside of the mouse keeps going out and wont come back on until i lift the mouse up, and put back down. I SWEAR TO GOD that the 4.01 drivers did SOMETHING to my computer!!!

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This is what I thought of earlier today because it seems a bit stupid to have an iPhone 17 running iOS 26 (or iOS 2026 / or even iOS 25/2025). Just make it simple so that the year of the hardware release and the software release are in sync. I personally think they should go with 25 or 2025 (not 26 or 2026), but syncing the hardware and software version numbers could be easier to keep track of. At first, it will maybe be jarring due to all of the changes across the ecosystem, but from that point on it will be easier to keep track of.
    • my dad is experiencing the same thing except it's with Excel. the font became thin compared to windows 10, all the settings the same. i've chalked it up to it being that its connected via DVI instead of HDMI. is your setup the same? i have no technical reasons to believe it's DVI, just a plain guess since the other screen he's connected to seems better to me although may just be my mind playing tricks.  also, why don't you change the text size in accessibility? maybe this will help?   
    • I think you missed the point. I don't know why I think 2026 makes more sense than 26. Microsoft didn't call it Office 16, they referred to the (next) year of the product and so the naming convention made sense. Going from 19 to 26 could cause confusion for someone that takes a glance; I guess that is my thought process. But you're right, it doesn't make a difference. Although by that token, why change the naming convention to begin with?
    • I have checked the scaling, and it is not different at all I reapplied my current theme and no thing changed.   Fonts still too damn small and NO OPTION IN WINDOWS TO ADDRESS IT ANYMORE!   Removing options for customization is NOT UPGRADING IN ANYWAY!
  • Recent Achievements

    • Week One Done
      abortretryfail earned a badge
      Week One Done
    • First Post
      Mr bot earned a badge
      First Post
    • First Post
      Bkl211 earned a badge
      First Post
    • One Year In
      Mido gaber earned a badge
      One Year In
    • One Year In
      Vladimir Migunov earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      +FloatingFatMan
      256
    3. 3
      snowy owl
      248
    4. 4
      ATLien_0
      224
    5. 5
      +Edouard
      189
  • Tell a friend

    Love Neowin? Tell a friend!