• 0

fastest booting OS needed


Question

whats the fastest booting OS out there? im setting up my P3 667 256MB, 25GB, some passive 4MB AGP as a music thing in the basement, and i need an OS that would load in less then 15 seconds. linux windows anything that cam play MP3 MP3 pro and WMA (winamp really)

Edited by musicmaster
Link to comment
https://www.neowin.net/forum/topic/192395-fastest-booting-os-needed/
Share on other sites

Recommended Posts

  • 0

Look dont listen to this stability and linux v windows crap very simply

Linux generally loads reasonably fast but to this day the fastest boot ive seen has to be WindowsME. It even boots fast off old crap machines so it should be quite fine for what you have.

Additionally you could just run any Windows higher then 98? and just use Standby and Hibernate modes. Standby will load up damn quick.

But yeah for running winamp, stability, usability etc none of those are your concerns so personally if you want bootup im thinking WindowsMe. Or if your happy to waste a cpl cents a day, just use standby mode and use whatever you want.

  • 0

i was just about to suggest geexbox :p

the longest bit about the boot is the bios posts and that ****... I would though go with Windows XP Embedded... Get it at www.microsoft.com/windows/embedded.. use the evaluation.. you can use it for 180 days but you can either reinstall it every 6 months or you will find a way around it ;)

windows embedded is a program which you run, you can then choose what part you want.. i would select drivers + winlogon + (cant remember what it is called the basics that you must have) + network support (if you want to stream music over the network) + winamp... it will boot really fast...

edit: geexbox will not boot in 5 seconds on a p3... but it is fast as well...

edit2: sorry did se that you said it booten in 5 seconds for you...

Edited by Fredde87
  • 0

Not got any suggestions other than what you've got so far but I'd just like to say.

I've got a second sys like this, I call it my M-Box (multimedia-box) It's connected to my TV in a little Shuttle Case I use it for recording TV and playing Divx/WMA/DVD as well as some games that play good through a usb gamepad like NFSU and PSPE as well as some basic web browsing like checking local cinema times and reading film reviews. Helps if you got a tv that can accept a 800x600 signal without getting too blurry. It's a real nice thing to have next to your TV if you can get a quiet enough PSU/Cooling Fan/HDD

Heartily Recommended

Ascii

  • 0

I'm running an AMD Athlon XP 2800+ with 512MB DDR RAM.

Here's what I did:

  • Imported my hardware configuration into Target Designer
  • Modified the Target Device Settings* (using the Settings panel)
  • Added the Information Appliance Design Template
  • Configured the Information Appliance component (using the Settings panel)
  • Ran a Dependency Check (F5)
  • Removed components that I don't use
  • Configured the User Interface Core component (using the Settings panel)
  • Added and configured the Automatic Logon component (using the Settings panel)
  • Built the target image without running a Dependency Check (F7)

* specifically, Boot ARC Path and Boot Partition Size

Here's a list of the components I added:

  • Automatic Logon
  • Add Hardware Control Panel
  • Add/Remove Programs Control Panel
  • Date/Time Control Panel
  • Device Manager
  • Display Control Panel
  • Keyboard & Mouse Control Panel
  • Map Network Drives/Network Places Wizard
  • Power Meter Control Panel
  • Registry Editor
  • System Control Panel
  • Task Manager
  • Tray Icon Add/Remove Support
  • Users Control Panel
  • Windows Accessories (minus Wordpad)
  • CMD - Windows Command Processor

I'm having problems installing the ATi drivers though. :wacko:

  • 0

XP boots faster than 2000 and NT, so stay away from those. If you disabled the eye-candy from XP you might find it fast enough.

Other than that, you could boot from a CD-ROM that creates a 128MB RAM drive that contained Windows 95 and a music player.

Assuming that this guy hasn't stripped the networking components then you get your music from the network.

http://www.geocities.com/politalk/win95/emrgcy95.htm

He says you can boot in as little a 2 seconds.

n.b. I've noticed that CD burners seem to add a few seconds to the 9x boot time but perhaps that's only when burning software is installed.

Edit: I guess it does support networking

With Network access you can transfer long filenames from one computer to the other without having Windows installed.
  • 0
whats the fastest booting OS out there? im setting up my P3 667 256MB, 25GB, some passive 4MB AGP as a music thing in the basement, and i need an OS that would load in less then 15 seconds. linux windows anything that cam play MP3 MP3 pro and WMA (winamp really)

install DOS 6.22 on your rig and it will boot in less than 10 seconds...that's a promise!!!

:D LOL :D

  • 0
I'm running an AMD Athlon XP 2800+ with 512MB DDR RAM.

Here's what I did:

  • Imported my hardware configuration into Target Designer
  • Modified the Target Device Settings* (using the Settings panel)
  • Added the Information Appliance Design Template
  • Configured the Information Appliance component (using the Settings panel)
  • Ran a Dependency Check (F5)
  • Removed components that I don't use
  • Added components from Software > Sytem > User Interface
  • Added the Windows Installer Service and Autologin components
  • Configured the User Interface Core component (using the Settings panel)
  • Added and configured the Automatic Logon component (using the Settings panel)
  • Built the target image without running a Dependency Check (F7)

* specifically, Boot ARC Path and Boot Partition Size

I'm having problems installing the ATi drivers though. :wacko:

AHHHH you're working with XP embedded!!! That will boot like lightning :woot: :woot:

  • 0

If you dont mind the PC using a little bit of power and you have the hardware to do it then I would say Win XP with Stand by in the S3 position (bios setting)

This starts up in about the time it takes the monitor to warm up ie. about 2-3 secs. (Remember this is not an actual cold boot)

Stand by in S3 dumps the hibernate file into the RAM and the pc just keeps this powered so there are no fans or anything else running (which happens with standby in S1). Just a little juice to keep the memory up. On restarting it just loads the hibernate file out of ram which is the quickest possible method. No bios / raid load up as its all still detected.

Been using standby for a long time now (about a year) and it totally rocks imo. Also cool for WOL as dont have to wait ages for it to boot up.

Only side effect you sometimes have is it takes a little while for the DNS service to start after coming out of standby so you might not be able to browse the web by names for the first 5-10 secs after boot, but for music this would be no probs

  • 0
If you dont mind the PC using a little bit of power and you have the hardware to do it then I would say Win XP with Stand by in the S3 position (bios setting)

This starts up in about the time it takes the monitor to warm up ie. about 2-3 secs. (Remember this is not an actual cold boot)

Stand by in S3 dumps the hibernate file into the RAM and the pc just keeps this powered so there are no fans or anything else running (which happens with standby in S1). Just a little juice to keep the memory up. On restarting it just loads the hibernate file out of ram which is the quickest possible method. No bios / raid load up as its all still detected.

Been using standby for a long time now (about a year) and it totally rocks imo. Also cool for WOL as dont have to wait ages for it to boot up.

Only side effect you sometimes have is it takes a little while for the DNS service to start after coming out of standby so you might not be able to browse the web by names for the first 5-10 secs after boot, but for music this would be no probs

Actually, it does not dump any hibernate file into RAM, the contents of the RAM which you need to preserve are already in the RAM. All that S3 does is keep it powered.

  • 0
If you dont mind the PC using a little bit of power and you have the hardware to do it then I would say Win XP with Stand by in the S3 position (bios setting)

This starts up in about the time it takes the monitor to warm up ie. about 2-3 secs. (Remember this is not an actual cold boot)

Stand by in S3 dumps the hibernate file into the RAM and the pc just keeps this powered so there are no fans or anything else running (which happens with standby in S1). Just a little juice to keep the memory up. On restarting it just loads the hibernate file out of ram which is the quickest possible method. No bios / raid load up as its all still detected.

Been using standby for a long time now (about a year) and it totally rocks imo. Also cool for WOL as dont have to wait ages for it to boot up.

Only side effect you sometimes have is it takes a little while for the DNS service to start after coming out of standby so you might not be able to browse the web by names for the first 5-10 secs after boot, but for music this would be no probs

Actually, it does not dump any hibernate file into RAM, the contents of the RAM which you need to preserve are already in the RAM. All that S3 does is keep it powered.

what the hell :laugh: :laugh:

S1 is Standby, the system is put in Sleep Mode

and Hibernate, the contents of the ram is saved into the Hibernate file. :rolleyes:

S3 is Suspend to ram, PC is powered off but the DDR is Kept Powered.

:rofl:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft updates Visual Studio Code with chat cost tracking and multi-agent chats by Paul Hill Microsoft has just launched Visual Studio Code 1.126, its latest weekly release. This time, the company has focused on letting you see the total cost of chat sessions to spot expensive conversations; enabling multiple chats per session that run side-by-side in one agent host Copilot session; and letting you browse new folders safely in restricted mode. We have now reached the stage where free AI in IDEs is coming to an end. To help you keep track of your costs, VS Code now lets you see the entire cost of a chat session, rather than just individual turns. This should give you more transparency about which sessions consume the most credits, so you can better manage your usage over time and spend less. For those of you using the Agents window, you know it is possible to run and manage multiple agent sessions at once. In this update, a Copilot session started from an agent host can hold several chats at once. Explaining how this feature works, Microsoft writes: Finally, from this update forward, Microsoft will remove the pop-up when opening an untrusted folder. When you open a new folder now, it will automatically open in Restricted Mode. You will see a banner that lets you manage the trust level of the folder. Microsoft has made this change so that it’s easier to start inspecting code without giving it trust right away. If you have VS Code, you can check for updates within the app now to get this new version. Otherwise, you can download it from the Visual Studio Code website.
    • Anthropic accuses Alibaba of using 25,000 fake accounts to copy Claude's capabilities by Karthik Mudaliar Anthropic has accused Alibaba of using nearly 25,000 fraudulent accounts to extract capabilities from Claude on a huge scale. According to a report from Reuters, Anthropic told US lawmakers that operators linked to Alibaba and the company’s Qwen AI team generated 28.8 million exchanges with Claude between April 22 and June 5, 2026. That is a lot of Claude conversations, but Anthropic says this was not ordinary chatbot use. The company believes the accounts were part of a coordinated effort to collect answers that could help train or improve rival AI systems. The alleged campaign reportedly focused on some of Claude’s most valuable skills, including software development, multi-step reasoning, and agentic tasks. In practical terms, that means getting an AI model to plan and complete work across several stages rather than simply answering a single question. This is called 'distillation,' where AI companies use outputs from a larger model to train a smaller and cheaper one. The smaller model learns to imitate useful parts of the more capable system without needing the same amount of computing power. The distillation process isn't automatically suspicious, but the problem comes when one company gathers another provider's outputs without permission and at an industrial scale. Also, this does not mean Alibaba obtained Claude’s source code, model weights, or original training data. Instead, Anthropic claims the accounts repeatedly asked Claude carefully designed questions and collected the answers. Those answers could then be used as training material for another model. Anthropic has made similar accusations against DeepSeek, Moonshot AI, and MiniMax earlier this year. As Neowin previously reported, Anthropic said those three companies collectively generated more than 16 million Claude exchanges through roughly 24,000 accounts. Anthropic says the new campaign produced almost twice as many exchanges in a matter of weeks. Anthropic reportedly told lawmakers that the campaign could help Chinese AI developers approach the capabilities of its Mythos Preview model. Mythos is focused on advanced cybersecurity work, including finding and exploiting complex software vulnerabilities. via Reuters | Photo via DepositPhotos.com
    • An Indian manufacturer that assembles roughly one-third of Apple's iPhones and supplies semiconductor components to Tesla confirmed Monday that attackers had stolen and publicly published a 630-gigabyte cache of confidential files — including engineering blueprints stamped "TRADE SECRET," a 52-page quality inspection document for iPhone circuit board components, and cryptographic certificates that security experts say could be weaponized in follow-on attacks. https://www.techtimes.com/articles/319019/20260624/apple-tesla-supplier-tata-electronics-confirms-630-gb-data-theft-iphone-specs-dark-web.htm
    • I don't think it was ever a big question. In fact, I don't think anyone ever asked about how clocks work on Mars.
  • Recent Achievements

    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      176
    3. 3
      PsYcHoKiLLa
      133
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!