• 0

fastest booting OS needed


Question

whats the fastest booting OS out there? im setting up my P3 667 256MB, 25GB, some passive 4MB AGP as a music thing in the basement, and i need an OS that would load in less then 15 seconds. linux windows anything that cam play MP3 MP3 pro and WMA (winamp really)

Edited by musicmaster
Link to comment
https://www.neowin.net/forum/topic/192395-fastest-booting-os-needed/
Share on other sites

Recommended Posts

  • 0

Look dont listen to this stability and linux v windows crap very simply

Linux generally loads reasonably fast but to this day the fastest boot ive seen has to be WindowsME. It even boots fast off old crap machines so it should be quite fine for what you have.

Additionally you could just run any Windows higher then 98? and just use Standby and Hibernate modes. Standby will load up damn quick.

But yeah for running winamp, stability, usability etc none of those are your concerns so personally if you want bootup im thinking WindowsMe. Or if your happy to waste a cpl cents a day, just use standby mode and use whatever you want.

  • 0

i was just about to suggest geexbox :p

the longest bit about the boot is the bios posts and that ****... I would though go with Windows XP Embedded... Get it at www.microsoft.com/windows/embedded.. use the evaluation.. you can use it for 180 days but you can either reinstall it every 6 months or you will find a way around it ;)

windows embedded is a program which you run, you can then choose what part you want.. i would select drivers + winlogon + (cant remember what it is called the basics that you must have) + network support (if you want to stream music over the network) + winamp... it will boot really fast...

edit: geexbox will not boot in 5 seconds on a p3... but it is fast as well...

edit2: sorry did se that you said it booten in 5 seconds for you...

Edited by Fredde87
  • 0

Not got any suggestions other than what you've got so far but I'd just like to say.

I've got a second sys like this, I call it my M-Box (multimedia-box) It's connected to my TV in a little Shuttle Case I use it for recording TV and playing Divx/WMA/DVD as well as some games that play good through a usb gamepad like NFSU and PSPE as well as some basic web browsing like checking local cinema times and reading film reviews. Helps if you got a tv that can accept a 800x600 signal without getting too blurry. It's a real nice thing to have next to your TV if you can get a quiet enough PSU/Cooling Fan/HDD

Heartily Recommended

Ascii

  • 0

I'm running an AMD Athlon XP 2800+ with 512MB DDR RAM.

Here's what I did:

  • Imported my hardware configuration into Target Designer
  • Modified the Target Device Settings* (using the Settings panel)
  • Added the Information Appliance Design Template
  • Configured the Information Appliance component (using the Settings panel)
  • Ran a Dependency Check (F5)
  • Removed components that I don't use
  • Configured the User Interface Core component (using the Settings panel)
  • Added and configured the Automatic Logon component (using the Settings panel)
  • Built the target image without running a Dependency Check (F7)

* specifically, Boot ARC Path and Boot Partition Size

Here's a list of the components I added:

  • Automatic Logon
  • Add Hardware Control Panel
  • Add/Remove Programs Control Panel
  • Date/Time Control Panel
  • Device Manager
  • Display Control Panel
  • Keyboard & Mouse Control Panel
  • Map Network Drives/Network Places Wizard
  • Power Meter Control Panel
  • Registry Editor
  • System Control Panel
  • Task Manager
  • Tray Icon Add/Remove Support
  • Users Control Panel
  • Windows Accessories (minus Wordpad)
  • CMD - Windows Command Processor

I'm having problems installing the ATi drivers though. :wacko:

  • 0

XP boots faster than 2000 and NT, so stay away from those. If you disabled the eye-candy from XP you might find it fast enough.

Other than that, you could boot from a CD-ROM that creates a 128MB RAM drive that contained Windows 95 and a music player.

Assuming that this guy hasn't stripped the networking components then you get your music from the network.

http://www.geocities.com/politalk/win95/emrgcy95.htm

He says you can boot in as little a 2 seconds.

n.b. I've noticed that CD burners seem to add a few seconds to the 9x boot time but perhaps that's only when burning software is installed.

Edit: I guess it does support networking

With Network access you can transfer long filenames from one computer to the other without having Windows installed.
  • 0
whats the fastest booting OS out there? im setting up my P3 667 256MB, 25GB, some passive 4MB AGP as a music thing in the basement, and i need an OS that would load in less then 15 seconds. linux windows anything that cam play MP3 MP3 pro and WMA (winamp really)

install DOS 6.22 on your rig and it will boot in less than 10 seconds...that's a promise!!!

:D LOL :D

  • 0
I'm running an AMD Athlon XP 2800+ with 512MB DDR RAM.

Here's what I did:

  • Imported my hardware configuration into Target Designer
  • Modified the Target Device Settings* (using the Settings panel)
  • Added the Information Appliance Design Template
  • Configured the Information Appliance component (using the Settings panel)
  • Ran a Dependency Check (F5)
  • Removed components that I don't use
  • Added components from Software > Sytem > User Interface
  • Added the Windows Installer Service and Autologin components
  • Configured the User Interface Core component (using the Settings panel)
  • Added and configured the Automatic Logon component (using the Settings panel)
  • Built the target image without running a Dependency Check (F7)

* specifically, Boot ARC Path and Boot Partition Size

I'm having problems installing the ATi drivers though. :wacko:

AHHHH you're working with XP embedded!!! That will boot like lightning :woot: :woot:

  • 0

If you dont mind the PC using a little bit of power and you have the hardware to do it then I would say Win XP with Stand by in the S3 position (bios setting)

This starts up in about the time it takes the monitor to warm up ie. about 2-3 secs. (Remember this is not an actual cold boot)

Stand by in S3 dumps the hibernate file into the RAM and the pc just keeps this powered so there are no fans or anything else running (which happens with standby in S1). Just a little juice to keep the memory up. On restarting it just loads the hibernate file out of ram which is the quickest possible method. No bios / raid load up as its all still detected.

Been using standby for a long time now (about a year) and it totally rocks imo. Also cool for WOL as dont have to wait ages for it to boot up.

Only side effect you sometimes have is it takes a little while for the DNS service to start after coming out of standby so you might not be able to browse the web by names for the first 5-10 secs after boot, but for music this would be no probs

  • 0
If you dont mind the PC using a little bit of power and you have the hardware to do it then I would say Win XP with Stand by in the S3 position (bios setting)

This starts up in about the time it takes the monitor to warm up ie. about 2-3 secs. (Remember this is not an actual cold boot)

Stand by in S3 dumps the hibernate file into the RAM and the pc just keeps this powered so there are no fans or anything else running (which happens with standby in S1). Just a little juice to keep the memory up. On restarting it just loads the hibernate file out of ram which is the quickest possible method. No bios / raid load up as its all still detected.

Been using standby for a long time now (about a year) and it totally rocks imo. Also cool for WOL as dont have to wait ages for it to boot up.

Only side effect you sometimes have is it takes a little while for the DNS service to start after coming out of standby so you might not be able to browse the web by names for the first 5-10 secs after boot, but for music this would be no probs

Actually, it does not dump any hibernate file into RAM, the contents of the RAM which you need to preserve are already in the RAM. All that S3 does is keep it powered.

  • 0
If you dont mind the PC using a little bit of power and you have the hardware to do it then I would say Win XP with Stand by in the S3 position (bios setting)

This starts up in about the time it takes the monitor to warm up ie. about 2-3 secs. (Remember this is not an actual cold boot)

Stand by in S3 dumps the hibernate file into the RAM and the pc just keeps this powered so there are no fans or anything else running (which happens with standby in S1). Just a little juice to keep the memory up. On restarting it just loads the hibernate file out of ram which is the quickest possible method. No bios / raid load up as its all still detected.

Been using standby for a long time now (about a year) and it totally rocks imo. Also cool for WOL as dont have to wait ages for it to boot up.

Only side effect you sometimes have is it takes a little while for the DNS service to start after coming out of standby so you might not be able to browse the web by names for the first 5-10 secs after boot, but for music this would be no probs

Actually, it does not dump any hibernate file into RAM, the contents of the RAM which you need to preserve are already in the RAM. All that S3 does is keep it powered.

what the hell :laugh: :laugh:

S1 is Standby, the system is put in Sleep Mode

and Hibernate, the contents of the ram is saved into the Hibernate file. :rolleyes:

S3 is Suspend to ram, PC is powered off but the DDR is Kept Powered.

:rofl:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • GitHub removes manual model selection from Copilot free and student plans by Karthik Mudaliar GitHub is removing the ability to manually select an AI model from its Copilot Free and Student plans, making its automatic routing system the default and only way to choose a model. This means users on these tiers will no longer be able to deliberately select a particular OpenAI, Anthropic, Google, or Microsoft model for a task. In its announcement, GitHub said Copilot Auto will dynamically choose what it considers the best model for each request. Free and Student accounts will retain access to models from multiple families, although the available selection will continue to depend on the restrictions attached to each plan. GitHub did not identify a fixed pool of models that Auto will always use, and its documentation warns that model availability can change over time. GitHub describes Auto as more than a random fallback system. On supported surfaces, its task-optimization technology evaluates the complexity of a request alongside real-time information about model health and availability. Straightforward prompts can be routed to faster and less expensive models, while more demanding coding tasks may be sent to higher-cost reasoning models. The company says this approach should reduce rate limiting, latency, and failed requests. Auto generally selects one model along natural prompt-caching boundaries rather than repeatedly switching models during a session, as GitHub found that mid-session changes increased costs without producing sufficient improvements in output quality. Users can still check which model generated a response. In Copilot Chat, the information appears when hovering over an answer, while Copilot CLI and the Copilot cloud agent display the selected model alongside their output. Auto is available in Copilot Chat, Copilot CLI, and the cloud agent, with the exact implementation and release status varying between supported development environments. The latest restriction follows several months of adjustments to Copilot’s individual plans. GitHub temporarily halted new Pro, Pro+, and Student subscriptions in April as it sought to manage demand and service reliability. It later introduced token-based billing and began gradually reopening individual-plan registrations on June 17. Alongside the picker change, GitHub is retiring the “Preview” label from Microsoft-developed models. It argues that the label is no longer necessary because Auto handles model routing and models are continuously updated behind the scenes.
    • Look up 'inflation' kid. Ask an AI for the numbers between both games.
    • Google reportedly set to lose two key Gemini and DeepMind researchers to Anthropic by Karthik Mudaliar Google is reportedly preparing to lose two more prominent artificial intelligence researchers, with Gemini contributors Jonas Adler and Alexander Pritzel planning to join rival AI developer Anthropic. According to a report from Bloomberg, both researchers are viewed internally as important contributors to Google’s flagship Gemini model family. Adler worked on Google’s AI coding efforts, while Pritzel was involved in the process used to train AI systems. Neither company has publicly confirmed the moves. The report also does not say when the researchers will formally leave Google or what positions they will hold at Anthropic. Training a large AI model requires decisions covering its architecture, data preparation, distributed computing infrastructure, and post-training methods that shape how the finished system behaves. Researchers with experience operating at the scale of Gemini are consequently difficult to replace quickly. Both Adler and Pritzel have previously contributed to Google DeepMind’s scientific research as well. They are listed among the authors of the company’s work on expanding AlphaFold protein-structure predictions across entire proteomes, alongside AlphaFold researchers including John Jumper. The reported departures arrive shortly after another important change within Google’s Gemini organization. Gemini co-lead Noam Shazeer is leaving Google for OpenAI, after returning to the search company in 2024 through its deal with Character.AI. Shazeer is particularly well known as one of the authors of the Transformer paper, whose architecture became the foundation for most modern large language models. Anthropic, meanwhile, has been recruiting recognizable figures from other leading laboratories. OpenAI co-founder and former Tesla AI director Andrej Karpathy joined Anthropic’s pre-training team in May. His move, followed by the reported recruitment of several Google researchers, suggests Anthropic is strengthening the research teams responsible for the core capabilities of future Claude models rather than concentrating solely on product and enterprise sales. The competition is complicated by the companies’ extensive commercial relationships. Anthropic competes directly with Google’s Gemini models, but it also relies on Google as an infrastructure partner. In April, Anthropic announced an expanded agreement with Google and Broadcom covering multiple gigawatts of next-generation Tensor Processing Unit capacity. TPUs are Google-designed accelerators used to train and run large AI models. via Bloomberg
    • This article makes my head hurt. Lots of confusing words
    • Google adds built-in computer control to Gemini 3.5 flash by Karthik Mudaliar Google has added Computer Use as a built-in tool in Gemini 3.5 Flash, giving developers a single model that can reason about a task and operate graphical interfaces across browsers, mobile devices, and desktop environments. The feature is available through the Gemini API and Google’s Gemini Enterprise Agent Platform, although it remains a preview feature for now. Computer Use enables an AI agent to examine screenshots and return actions such as mouse clicks, scrolling, and keyboard input. A developer’s application must execute those actions, capture the resulting screen, and send it back to Gemini, creating a continuous loop until the task is completed. Google says the integration can be used for activities including repetitive form filling, application testing, research across multiple websites, and longer enterprise workflows. Gemini 3.5 Flash can work with browser, mobile, and desktop environments, whereas Google’s earlier standalone Computer Use model was primarily positioned around browser interaction. The main change is consolidation. Computer control was previously offered through the separate Gemini 2.5 Computer Use preview model. As Neowin reported when that model was introduced, it was designed to interpret a visual interface and generate actions without requiring a website-specific API. Google later brought Computer Use to preview versions of Gemini 3 Pro and Gemini 3 Flash in January 2026. The latest release now incorporates the tool into the stable Gemini 3.5 Flash model rather than requiring developers to select a specialized model solely for interface automation. Gemini 3.5 Flash itself was announced in May as Google’s latest fast model for coding and multi-step agent workflows. It supports a one-million-token input context window and up to 65,000 output tokens, along with adjustable thinking levels that let developers trade additional reasoning for lower latency and cost. Google also added that Gemini 3.5 Flash received targeted adversarial training for computer-use scenarios. The company is also offering safeguards that can require user confirmation before sensitive or irreversible actions and automatically stop a workflow when suspected prompt injection is detected. Its developer documentation describes configurable protections for areas such as financial transactions and changes to sensitive records. Google isn't the first to bring Computer Use to its platform. Anthropic has made computer control available through Claude, while OpenAI has continued improving computer-use performance in its recent models. Microsoft has also applied the concept to business workflows, including a Computer Use capability for the Researcher agent in Microsoft 365 Copilot.
  • Recent Achievements

    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
    • One Year In
      Tom Schmidt earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      463
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!