Doom 3 Sound Issues


Recommended Posts

I was having this same problem and I have an Audigy Platinum. I hopped onto creatives web site, got the latest drivers and the EAX 4 support pack and that seemed to fix everything. Hopefully this will help you.

As has been said a couple times, but which I will repeat: Doom3 does not use the hardware-acceleration on any sound cards. It doesn't use EAX, it doesn't use DirectSound hardware acceleration. It is purely processed in software by the Doom3 engine on the CPU. So this problem is obviously a bug in Doom3 which will have to be fixed with a patch. Whatever made the sound start working again on your computer was probably either a coincidence, or Creative has some software running the the background that was interfering and the new driver changed what was happening (but I doubt that happens at all).

What's ironic is id used a software-only solution to ensure this exact scenario would not take place, that the amazing surround sound would work no matter what your configuration (as long as your configurations supported 4.1/5.1+), heh.

I've done some more research on stuttering sound. It turns out it's related to disk access using DMA. This is why it occurs most at the start of the levels while files are still being precached.

I'm using a VIA IDE chipset, and I've tried turning DMA off on all controllers but this just makes it worse as PIO is too slow to load the files.

This is some crazy schzit that is going on here and basically it means im SOL because there is no updated VIA drivers apart from the ones that ship with XP, I've tried 2 sound cards (cmedia onboard and creative soundblaster live value).

Crimson: I belive you are wrong with the no DirectSound. Turning off all hardware acceleration means that I get no sound, so it's gotta be using basic directsound access.

I agree however that it's very ironic. The sound problems people have had on this game way outnumber any on other games that I've heard of.

You can restart the sound system in the game easily by binding a key to s_restart. For example, bring down the console (ctrl+alt+~) and type "bind m s_restart" so that hitting m will restart the sound system in-game quickly.

Anyway, I'm using an Audigy 2 and I too notice some scratchy, intermittent sound sometimes on my 2.1 setup. To be honest I don't think it's a bug but rather a result of the CPU being stressed by video rendering to the point where it doesn't have enough juice to process the sound properly (so I suppose if you have a really high-end system you might not experience any sound problems). Also, in most games I get great surround simulation but with Doom 3 it kind of sucks to be honest, not to mention that the weapon sounds really lack bass and so feel weak.

Yes, I should of posted my computer specs. Sorry.

The readme just says get latest drivers and put hardware accelaration down. I've tried that, and it don't work.

My CPU is an AthlonXP 1800+ Palimino, 768MB PC2100 RAM, MSI KT400 mobo, GF4Ti4200 128MB. I'm using the latest drivers from NVidia.com - 61.77 I think. I don't think it's a driver/hardware related issue.

I've got same motherboard/video card as you, except I'm running a 2100+ with 1GB 2700 DDR.

Anyway, on newer games (FarCry, NFS:U) I have a different kind of problem, and I'm pretty sure it's sound related, although it COULD be video related. I can play Doom3 for about 2-3 minutes then all of a sudden my video freezes but the sounds keep playing. After about 10 seconds, it goes right back to normal...then it does it again after a said amount of time. On FarCry, I can't play more than 40 seconds without this happening. It doesn't matter what graphic settings I have in any of the games, it eventually happens.

I guess this isn't what is happening with the rest of you, but just thought I'd post it in case someone else has a fix or a similar issue.

BTW, I'm running Dets 45.23. With the 61.77, I had an instance in Doom3 where all lighting disappeared. If I turned on the flashlight it wouldn't illuminate anything. I've had no problems with the 45.23s though.

I am starting to think 100% that the IDE controller is at fault here.

Can you just check that you have a VIA IDE controller with a driver date of 7/2001? (sometime in 2001).

The worrying thing is that I think that ID actually know this is a problem as it's in the readme and the only people who have stuttering problems are on a VIA chipset mobo. This probably means they couldn't fix it and it's an external driver issue :/

restarting the sound works for me (when the sound just stops working), though it is still a pain in the butt (in the options menu of course, I haven't tried binding a key or anything yet). Im hoping its just a problem with the cracked exe and not the real game. I guess I will find out tomorrow morning :). I bet ID will have some patches out soon either way, their usually pretty good about things like that.

I've tried a different sound card (SBLive Value) and it's the same problem. Seems like it's a doom3 bug :(.

I had some problems with SBLive Value but changing the drivers to Windows XP default drivers seemed to fix the problem. My problem was that after (maybe) 10 minutes of play, the game/computer froze and the sound went into a very fast loop, sounding more like a machine gun :huh:

And I'm also considering if I should buy the required cable and try the onboard 5.1 digital sound output (AC'97 on Shuttle SB61G2), but I'm not sure if it eats much CPU compared to using the SBLive Value. Any ideas on this?

Thank god for this! i thought i would be the only one with this problem..

I have an Audigy 1 Platinum, and i'm having the sound cut off problem. Everything works fine, superb sound etc, then suddenly, silence... I was using the menu/surround off/on method to bring the sound back, but that basically ruined the game. Here's my findings:

1.I tried lowering the Hardware Accelleration settings on the audio device one notch. The problem still occurred..BUT... 90% of the time pressing ESC and returning to the menu would result in the sound coming back without having to unset/reset the surround sound option. However, this method is still pretty useless as it ruins the whole flow of the game.

2.I tried disabling the surround option (with Hardware Accelleration set to full). Again, the sound cut out randomly

3. I set the keybind to restart the sound.... this works well, but it's still damn annoying.

4.I switched to my motherboard's onboard sound, which is c-media 5.1. I now have uninterupted 5.1 surround sound, albeit slightly poorer quality than the Audigy puts out but still excellent. Occassionally, there is the odd crackle, which seems to be when accessing the disc, but i can live with that.

So, luckily, i have onboard sound to fall back on.. If you have onboard sound and you havent tried it yet, give it a go, it might give you a quick fix until the problem has been addressed via patch etc. It's interesting that I had this exact problem with Far Cry and Joint Operations. As far as I know, all 3 of these games have their own sound handling and dont use the actual card support?! (i could be wrong here).. until today I suspected that this issue was the audigy... and I was thinking of replacing it... now i just don't know.. is this soundcard related, motherboard, drivers, bad coding? ....it's definately damn annoying, and seems to be happening more and more with new titles.

restarting the sound works for me (when the sound just stops working), though it is still a pain in the butt (in the options menu of course, I haven't tried binding a key or anything yet). Im hoping its just a problem with the cracked exe and not the real game. I guess I will find out tomorrow morning :). I bet ID will have some patches out soon either way, their usually pretty good about things like that.

i dont have a cracked exe and its doing it for me, so i think you will experience the same problems with the retail :unsure:

I had some problems with SBLive Value but changing the drivers to Windows XP default drivers seemed to fix the problem. My problem was that after (maybe) 10 minutes of play, the game/computer froze and the sound went into a very fast loop, sounding more like a machine gun :huh:

And I'm also considering if I should buy the required cable and try the onboard 5.1 digital sound output (AC'97 on Shuttle SB61G2), but I'm not sure if it eats much CPU compared to using the SBLive Value. Any ideas on this?

I'm using the default Windows drivers...

I am starting to think 100% that the IDE controller is at fault here.

Can you just check that you have a VIA IDE controller with a driver date of 7/2001? (sometime in 2001).

The worrying thing is that I think that ID actually know this is a problem as it's in the readme and the only people who have stuttering problems are on a VIA chipset mobo. This probably means they couldn't fix it and it's an external driver issue :/

Aldo - I'm at work but I'll get back to you when I get home. But, I can almost assure you that it is 07/2001. I saw that date a bunch of times earlier today when I was trying to find a fix for my problem. I've tried a bunch of different Hyperion drivers, and unfortunately, the on-board sound drivers for CMedia go back to like 2001/2002. If it is a IDE Controller issue, I think you're right and we're going to be looking for a new mobo soon.

What BIOS version do you have for your KT400? I doubt it will fix anything, but I'm just curious. I have the 1.3 dated 01/2003.

you are aware of the ongoing issue relating to the via southbridge/PCI conflict issue?

i was plagued by this about 2 years ago... there were big problems with the controller I had on my board, which seemed to have issues with creative cards.. there was much arguing between via and creative, and i think it was creative who ended up with the blame. It was dubbed the 686 Southbridge issue or something like that? :blink:

The problems caused crackling and popping when the controller was being used. I got so fed up with it that I ditched VIA altogether, and instead tried another chipset manufacturer. I'm sure they will have fixed the problem that i was having back then, but this does sound very similar to what was happening back then. Check out www.viaarena.com and see if there are any issues with your board/controller. That site was very useful for me back in the day [;)]

best fix currently for the sound just cutting off is pulling down the console and binding a key to restart the sound. still sucks, but it will have to do.

Open up the DoomConfig.cfg file (which can be found in the .\base folder of Doom3's main install folder) and add the following line somewhere in the bind section at the top...

bind "x" "s_restart"

...but replace the letter x with a key of your choice. Once you're in the game and the sounds starts fugging up just tap the key you chose and everything should be fixed. No need to go into options and toggle surround or bind it manually everytime you play the game :)

Aldo - I can confirm now that the VIA Bus drivers I have are 07/01/2001.

I guess it's just time to upgrade, which I was planning on doing anyway.

That's what I thought :/. I'm using default BIOS that came with my board, and it's probably something like early 2003. I'm actually gonig to get a new rig anyway, but this is a real pain.

The only problem is that I am going to get a NForce2 board to replace this - either the MSI Delta something or the ASUS one - do you know if this will pose a problem with all these reports of problems :(

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Friday Windows 11 preview builds are here. Insiders in the Experimental (formerly Dev) and Beta Channel can download builds 26300.8697 and 26220.8690. My Windows11 device on the Preview Channel just got 26220.8728. My guess is this build is a nightly update from 26220.8690.
    • Traffic has a surprisingly unexpected impact on your surroundings by Sayan Sen Image by Radik 2707 via Pexels A collaborative study by researchers from several Israeli institutions found that everyday pollution from traffic and industrial activity measurably changed the atmospheric electric field over the Tel Aviv metropolitan area, providing new evidence of how human activity can influence the lower atmosphere. The research was led by Dr. Roy Yaniv of the Hebrew University of Jerusalem and the Gertner Institute at Sheba Medical Center, Dr. Assaf Hochman of the Fredy & Nadine Herrmann Institute of Earth Sciences at the Hebrew University, and Prof. Yoav Yair of Reichman University. The study also involved Itay Froomer, a student from Hadera High School and the Israeli Museum of Medicine and Science (Technoda), who carried out the work as part of the Ministry of Education's 5-unit physics research track. The researchers focused on the atmospheric electric field under fair-weather conditions. Even in the absence of storms, a weak electric field naturally exists between Earth's surface and the atmosphere. One of the main ways scientists measure this field is through the Potential Gradient (PG), which is the inverse of the vertical component of the electric field. PG is a key part of the global electric circuit, a planet-wide system of electrical currents maintained by thunderstorms and electrified clouds around the world. Scientists have long known that the atmospheric electric field can be influenced by factors ranging from large-scale atmospheric processes to local weather conditions such as dust, fog and clouds. Human-made pollution is also known to play a role, but understanding exactly how urban emissions affect the electric field close to the ground has remained an area of ongoing research. To investigate this relationship, the team analyzed measurements from a newly installed electric field mill, an instrument used to continuously monitor the strength of the atmospheric electric field. The instrument was installed at the Center for Technological Education (Roter House) in Holon and became operational in August 2024. It was funded by Israel's Ministry of Education and the Holon municipality. The electric field mill forms part of a broader monitoring network that includes nearby meteorological stations and air-quality monitoring sites. This allowed researchers to compare electric field measurements with detailed weather data and pollution records to better understand what was driving changes in the Potential Gradient. The study focused on two major urban pollutants: fine particulate matter (PM2.5) and nitrogen oxides (NOx), both commonly produced by vehicle traffic and industrial activity. PM2.5 refers to microscopic airborne particles small enough to remain suspended in the atmosphere for extended periods, while NOx is a group of gases released during fuel combustion. Researchers examined daily, weekly and seasonal patterns in the atmospheric electric field and compared them with changes in pollutant concentrations. Their analysis revealed a clear relationship between NOx levels and changes in the Potential Gradient, particularly during morning and evening rush hours when traffic emissions were at their highest. “What we observe is a direct physical link between emission peaks and electrical variability,” explained Dr. Roy Yaniv. “NOx reduces atmospheric conductivity very quickly, so the electric field responds almost instantaneously during traffic rush hours.” Atmospheric conductivity describes how easily electrical charges move through the air. According to the researchers, nitrogen oxides rapidly alter this conductivity, causing a near-immediate response in the electric field. PM2.5, however, was associated with a delayed response. The researchers attributed this difference to the particles' longer atmospheric residence time, meaning they remain in the atmosphere for longer periods, as well as their different microphysical interactions with surrounding air and atmospheric components. The study also identified a pronounced "weekend effect." In Israel, traffic volumes and some industrial activity decline significantly on Fridays and Saturdays. During these periods, concentrations of both NOx and PM2.5 dropped, and corresponding changes were observed in the atmospheric electric field. “The weekend signal demonstrates just how sensitive the electric field is to changes in human activity,” the researchers noted. “When emissions decline, the electrical environment adjusts at once, providing a high-resolution indicator of urban atmospheric conditions.” The findings showed that pollution levels can influence not only the chemical composition of the atmosphere but also its electrical properties. Researchers said the results strengthened the case for using atmospheric electricity as an additional tool for environmental monitoring, particularly in densely populated urban areas where anthropogenic, or human-caused, influences are most pronounced. The study also pointed to potential public health applications. By combining air-quality measurements with observations of atmospheric electricity, researchers said they could gain a more complete picture of how urban atmospheric conditions change over time. “Integrating air-quality data with electric-field measurements gives us a clearer picture of how the lower atmosphere evolves moment by moment,” the researchers added. “It’s a framework that can support both scientific insight and practical environmental decision-making.” Beyond the scientific findings, the project highlighted a collaboration between universities, public institutions and secondary education. Researchers said the work demonstrated how students could take part in real-world environmental research while contributing to studies of air quality, atmospheric processes and their potential effects on society. Source: Hebrew University, ScienceDirect This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • We aren't even at the all-star game and Microsoft is talking about an update that will most likely be released during the World Series if not after. A lot can happen in the world between now and the 2026 World Series, including the 2026 FIFA Cup. Tell me about it again after the FIFA Cup is concluded. That should allow plenty of time to prepare for it.
    • Great, tell me when I have a "Bad Pool Caller" elsewhere not in Windoze.
    • The first improvement they need to make to audio in W11 is to add an equalizer that actually works.
  • Recent Achievements

    • Week One Done
      AMV earned a badge
      Week One Done
    • One Month Later
      AMV earned a badge
      One Month Later
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      186
    3. 3
      Michael Scrip
      77
    4. 4
      PsYcHoKiLLa
      77
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!