Processor Temperature Database


Recommended Posts

CPU: P4 3.4C (OC to 3.75)

MB: ASUSP4G800-E deluxe

Cooling: CPU: swiftechMCW6002 block w/RAD676

everything else: air for now

Case Fans: 5 :2 120MM top for Rad

1 80MM side

2 80MM back

PSU Fans: 3 front/back/bottom

Case temp: 31C not sure how room temp is.

CPU temp: 32Cidle-36Cload

Excessive fans, I know (paranoid, 2nd PC running at 50Cidle w/stock). slowly removing redundant fans and adding more OC/liquid blocks over next 2 months. Post complete system temps when done.

CPU: Athlon XP 2100+ @ 2700+ (2.17GHz)

MB: Biostar M7NCG 400 mATX

Cooling: 1 80mm back @ ~ 5500RPM, 1 TR2TT TR2-M2 with adjustable fan @ ~ 5600rpm

Case Temp: about 40?C idle, 50?C load

CPU Temp: about 47?-50?C idle, 60?C load

This setup is working much better than I had anticipated, especially since it's a mATX setup with a Maxtor 200GB hard drive in it as well, and no front fan.

Just waiting until the day this whole thing melts into a puddle of crap...

  Sporkguy said:
I'm rather concerned over the temp of mine. Just built it today and i'm using the default heatsink and fan as supplied by AMD.

Athlon 64 3000

Idle temp: 75C

Load temp: upto 90C

Is that normal for the 'normal' heatsink and fan?

nope. in fact, i'm kind of surprised the cpu didn't melt yet.

make sure the heatsink is on properly.

Ok guys - I just took it apart again, removed the HSF and added some Arctic Silver to the CPU. Replaced the HSF and secured it tightly - so it's definately on right.

The fan rotates at around 3000RPM, and yet the idle temp still hovers around 70-75C

Anything else I can try, i really need help here, i'm compeltely stumped!

Tyan S2466 - 4N

2 x MP2000+

9600 XT AGP

1GB Registered ECC RAM

2 x 120GB ATA

400W PSU

4 x 8cm fans

CPUo: Thermaltake Extreme Volcano 12

CPU1: Thermaltake Volcano 11 Xaser

Fans @ full speed:

CPUo: Idle @ 42C

CPU1: Idle @ 46C

Case @ 40C

Will update after I stress out the system @ 100% load.

  • 2 weeks later...

I'm not sure how far off-topic this is, but here goes:

My BIOS reports CPU temp as ~48C-50C. I installed Motherboard Monitor 5, selected my mother board and it reported my CPU temp as 64C and my case temp as 127C! I'm sure the case temp is wrong (I doubt there's even a sensor - the machine is a self-build & unless the sensor is attached to the the mobo it doesn't exist ), but which CPU temp do I believe? The PC has 4 fans - 1 exhaust built into the PSU, one processor fan (AMD stock - supplied with the processor, which is an AMD XP Barton 2500+) & 2 case fans one intake at the front & an exhaust at the back (yes these fans are mounted the right way round). I would have thought this is sufficient cooling (or at least to reduce the CPU temp to below 64C).

Any suggestions? :unsure:

  Sporkguy said:
Ok guys - I just took it apart again, removed the HSF and added some Arctic Silver to the CPU. Replaced the HSF and secured it tightly - so it's definately on right.

The fan rotates at around 3000RPM, and yet the idle temp still hovers around 70-75C

Anything else I can try, i really need help here, i'm compeltely stumped!

It's not gonna be anywhere near close to that and still live/stay booted.

Your mobo temp reports must be wrong.

Processor: Athlon XP-M 2600+ @ 2.5ghz (200 x 12.5 @ 1.65v)

Motherboard: Epox EP-8KRAI

Heatsink (rpm): Speeze 5F286B (2250-2700rpm)

Case: Antec Sonata

# of Case Fans: 1 - Antec 120mm case fan

Thermal Compound - Arctic Silver 5 (and it hasnt had its 200 hrs to setup yet :p)

Avg Room Temp: 72-78F

CPU Temp (Idle - Stress): 35-52C (still burning in processor and CPU paste

I anticipate the temps wont have such a huge range once the Arctic Silver totally sets up and behaves itself. Otherwise its a great OC, maybe someday I'll play with the voltage/multiplier to find a sweet spot for 2.6ghz. Machine gets unstable within five minutes of operating at speeds over 2.5ghz, but 2.5 rocks on all night and never misses a beat. Go figure...

Processor (Standard or Mobile): Athlon XP2700+ (Standard) @2.36GHz 175fsb

Motherboard: EPoX 8k3a KT333 Rev 1.0

Heatsink (rpm) -or- Watercooled (setup details): Thermaltake Volcano 7

Case: Chen-Ming

# of Case Fans: 3

Avg Room Temp: 20C

CPU Temp (Idle - Stress): 41C - 59C

Processor: Athlon 64 3200+

MotherBoard: MSI K8T Neo FIS2R

Heatsink: Thermaltake Venus/FanSpeed 5500RPM (ducted)

Case: Antec Lanboy (3 x 2200 RPM fans) (modded fans into the case window for better flow)

Room Temp: 70 - 74F

CPU Temp (Idle - Stress): 39 - 43C

  • 3 weeks later...

Cpu: AMD Duron

Motherboard: PC Chips Highly Integrated (I like the red motherboard)

Heatsink: X-Blower (I am planning to overclock soon.)

Case: Some Case off Ebay. (LCD Screen and Heat Sensors for the graphics card

hard drive and cpu) It came with a bad power supply though!

# of Fans: 2 3 inch fans with three color LED lights (green, blue, red)

Average temp: In my room about 80 F but the computer stays an even 65 F :alien:

Proc: AMD 64 3000+ OC'd to 3200 currently

Mobo: Gigabyte K8NSNXP

Heatsink: Coolermaster HYPER 6

Case: Lian Li PC V1200

#of fans 4

Room temp 80'F

cpu temp is read wrong, (its a bios bug) correct temp is 35'C

temps.jpg

Edited by Nvidiafreak
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No, it's probably not the de-specialized edition, but Disney could surprise the 'Star Wars' faithful when the rerelease drops in theaters in 2027. It might not be the big anime-style birthday remake some "Star Wars" acolytes were hoping for, but "Star Wars: A New Hope" will be blasting back into movie theaters to celebrate its landmark 50th anniversary starting in April of 2027. The sprawling space opera is set to hit the silver screen again with a special limited-edition theatrical run beginning on April 30, 2027, and aptly running through the official Star Wars Day holiday on May the 4th. This will be the planet-wide event too, so international Star Wars fans won't miss out. There is a sliver of hope for purist fans that perhaps Disney might pull out an untouched archival print — the original version of the sci-fi sensation that first hit theaters on May 25, 1977 — but it's unlikely that Disney would risk upsetting creator George Lucas. Instead, we'd expect a freshened-up 1997 20th anniversary print to be the star attraction. https://www.space.com/entertainment/space-movies-shows/star-wars-a-new-hope-will-return-to-theaters-to-celebrate-its-50th-anniversary-but-disney-didnt-say-which-version  
    • Those are not rights. Those were special treatments that were taken away that non-trans whatever didn't get. They should be treated like every other person, not special. They can still go get their "trans-affirming" care, they just have to pay for it like everyone else.
    • Realistically how many difficult thinking request does the average person needs per week? The simplest 'nonthinking' model is way more powerful than anything we had 18 months ago. While the average person using these things for? I wonder how many games coding apps I've just thrown together for the sake of having fun or testing. I know I've done it. I think we've got to a stage where we just randomly asking ChatGPT anything even if we don't use 95% of what we ask it. These thinking instances do have a cost, environmentally as well as other resources. As we all know the limits will go up, but I don't think it's a bad start.
    • no way that was one of the best microsoft app, sigh its bizarre how microsoft making the worse decision on everything.... so i guess time to ask a good replacement of that
  • Recent Achievements

    • One Month Later
      Jaclidio hoy earned a badge
      One Month Later
    • Week One Done
      Yawdee earned a badge
      Week One Done
    • Week One Done
      eugwalker earned a badge
      Week One Done
    • First Post
      Ben Gross earned a badge
      First Post
    • One Month Later
      chiptuning earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      641
    2. 2
      +FloatingFatMan
      182
    3. 3
      ATLien_0
      148
    4. 4
      Xenon
      124
    5. 5
      wakjak
      106
  • Tell a friend

    Love Neowin? Tell a friend!