Processor Temperature Database


Recommended Posts

CPU: Intel Pentium 4 3.06GHz @ 3.50GHz (until I get new RAM)

MB: Gigabyte GA-8INXP

CPU Cooling: ThermalRight XP-90 w/ Vantec Tornado 92mm (119 cfm)

Case: Antec PLUSVIEW1000AMG

# of Case Fans: 5x Panaflo 80mm High Speed (2xFront,2xBack,1xSide)

Avg Room Temp: 25-30? C

CPU Temp (Idle - Stress): 26?C Idle - 36?C Load

CPU - Intel Pentium 4 - 1.60Ghz 0,13 Northwood @2.40Ghz

M/B - MSI 865PE Neo2

Aircooled with heatsink in copper build by me and motor catch from Sunflower

Case build by me

# of Case Fans: none, unnecessary

CPU Temp - 31'C Idle and 42'C running Wmp10, Blender and Phothoshop 7.01 at same time

Mobo Temp - 34'C

Processor: Intel Pentium 4 2.8Ghz

Motherboard: MSI-Neo2 PLS

Heatsink (rpm) -or- Watercooled (setup details): Thermaltake Xaser 7 (Temp Controlled Fan, Max 6000 RPM)

Case: Antec Performance II Workstation Case

# of Case Fans: 2 - Generic 32CFM in front

Avg Room Temp: 65-80F

CPU Temp (Idle - Stress): 34c - 50c

Processor: Intel Pentium 4 2.4C (D1)/800 FSB

Motherboard: Asus P4P800 SE

Heatsink: stock Intel heatsink/fan @ ~ 2120

Case: Aspire X-Dreamer II w/350 watt PSU, soon to be an Antec True430

# of Case Fans: 1 80mm intake side, 1 80mm intake top, 1 ThermalTake 120mm exhaust rear

Avg Room Temp: can't tell...sorry

CPU Temp (Idle - Stress): 27C/80F Idle, 42C/111F Max

Thought I'd add to the group, good to know approx. temps of CPU's during load.

Processor (Standard or Mobile): AMD Athlon 64 3000+ (Socket 754)

Motherboard: Asus K8V-X

Heatsink (rpm) -or- Watercooled (setup details): Stock Fan (Usually ~3000RPM)

Case: Coolermaster Cavalier 1

# of Case Fans: 2

Avg Room Temp: 22-25

CPU Temp (Idle - Stress): 29 Celcius - 35.5 Stress

Processor: Intel Pentium 4 3.0C GHz @ 3.70 GHz

Motherboard: ASUS P4C800-E Deluxe BIOS 1019

Heatsink (rpm) -or- Watercooled (setup details): AeroCool HT-101 (2700rpm)

Case: Cooler Master Wave Master

# of Case Fans: 3 80mm (2000rpm)

Avg Room Temp: 22-24?CCPU Temp (Idle - Stress):> 25?C - 38?C

Processor: Intel Pentium (Prescott) 3.0E GHz

Motherboard: Asus P4P800-E Deluxe

HeatSync/Fan: Zalman CNPS7700-Cu

CaseFans: 3 (One Exhaust @ Rear + Two Intake @ Front)

Enermax 460w Power Supply has 2 built in Exhaust fans also.

Average Case Temp : 30C

Average Idle Temp: 36C - 39C

Average Load Temp: 40C - 49C

Average Room Temp w/ Computer On: 26C

Average Room Temp w/ Computer Off : 21C

I never have the heater on in Computer Room.

CPU: Intel Pentium 4 2.8GHz @ 3.30GHz

MB: Asus P4C800 Deluxe

CPU Cooling: Zalman CNPS7700-Cu

Case: Lian Li PC65

# of Case Fans: 80mm High Speed (2xFront,1xBack,1xTop)

Avg Room Temp: 27-33? C

CPU Temp (Idle - Stress): 30?C Idle - 46?C Load

Somehow my bios reading are about 6-7C higher than what asusprobe reports???

Processor (Standard or Mobile): AMD Athlon XP 2800+ Barton

Motherboard: Asus A7V600

Heatsink (rpm) -or- Watercooled (setup details): GlacialTech SilentBreeze III (~1800 RPM)

Case: Antec SLK3700AMB

# of Case Fans: 1

Avg Room Temp: 22-25

CPU Temp (Idle - Stress): 43 - 55 C

Processor: Pentium 4 550 3.4GHz (LGA775)

Motherboard: ASUS P5P800

Heatsink (rpm): Gigabyte 3D Cooler-Pro (3800rpm)

Case: Antec Performance Series II Tower

# of Case Fans: 5 - 2x Antec, 2x Antec Blue, 2x Thermaltake

Avg Room Temp: 72-74F (22-24C)

CPU Temp (Idle - Stress): 48c - 65c

Processor: Intel Pentium 4 2.80E GHz (Prescott)

Motherboard: AOPEN AX4SPE-UN (865PE chipset)

Heatsink (rpm): 2400-2500

Case: Premium

# of Case Fans: 5

Avg Room Temp: 20-25

CPU Temp: 34c Idle - 50 on heavy load.

I would just like to point out the hugh difference 1 80mm fan can make as I was shocked. :o

Stock cooling (HS + 40mm Fan) : 45?c

+ 1 80mm fan (exhaust) : 41?c - - (idle)

If that's changed to an intake it's : 39?c - - (idle)

And with the fan still as intake under stress : 48?c - - (stress)

So all in all

idle = 39?c

stress = 48?c

Edited by Sensayshun

Athlon XP 2700+ 2.08

DFI NFII Board

512mb 333 PC3200

AeroCool Hercules HSF (Lapped with AS5)

Idle 36-38

load 40-10

This is coming from average load of 62. I jsut got some AS5, taped a fan in front of my HD's to boost the intake power, and lapped the HSF.

Processor: Intel Pentium 4 2.8GHz Northwood

Motherboard: Asus P4PE-X

Heatsink: Zalman CNPS7000B-AlCu @ 1950rpm

Case: Chieftec Miditower ATX w/ 2xChieftec case fans

Avg Room Temp: 20-22C

CPU Temp:Idle: 33-35C Stress:45-47C

I installed my new CPU heatsink today (Zalman 7000B-AlCu) and it lowered my temps with almost 6C, that?s pretty damn good..:))

Before this, I used the stock heatsink that came with the CPU.

Wanted to edit my post above, but I was too slow....

The stress temps are wrong, they were measured when I had stock heatsink on.

During heavy load (like HL2 etc.) the CPU temps is 42-44C, which IMO is very good....

585228990[/snapback]

HL2 is considered heavy load? I thought "heavy load" was burn-in test which require 100% cpu usage.

Processor: AMD Athlon XP 2500+ Desktop @2.4ghz

Motherboard: Abit NF7 v2

Heatsink (rpm): Akasa Carival 2500rpm idle 4000rpm load (speedfan controlled)

Case: Generic Black and Silver

# of Case Fans: none.

Avg Room Temp: 20-23 degrees

CPU Temp (Idle - Stress): 38c - 55c

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • WebChangeMonitor 26.06 by Razvan Serea Monitors allows you to quickly check a number of web pages and tracks changes based on the content of the web pages. Allows to monitor several protocols, including HTTP and HTTPS. Allows to view and record differences. Available for Win7/10, Linux and others. WebChangeMonitor features: Allows monitoring of web pages and informs about content changes Indication of states of currently monitored items in the tool and taskbar Reporting as sound and/or email as well as log file or HTML log Several configuration / filter options Support all protocols, e.g. http, https Multi-threaded, running in the background Bulk-import and bulk-export of items (from/to CSV) to monitor Export of results to CSV file for further processing Allows running command on items states and/or showing diff (changes) of content with preferred diff-tool ...and many more! Open Source (C++, wxWidgets) Cross platform for Windows (7/10), Linux, RPi and Mac (if self-compiled) WebChangeMonitor 26.06 release notes: Release 26.06 brings mostly s but updates the underlying core infrastructure. A major compiler is used for both x86/x64 and WoA64 architectures. This also means that all core libraries are re-compiled accordingly which required some changes in the build scripts. One of the core libraries (cURL) has been updated to address vulnerabilities and a nasty linker error that was causing the need for a dedicated patch which could now be eliminated. Download: WebChangeMonitor 64-bit | Setup 64-bit | ~10.0 MB (Open Source) Download: WebChangeMonitor 32-bit | Setup 32-bit View: WebChangeMonitor Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • BATorrent 3.0.4 is out.
    • yea they change their app to high-system app so you can't disable with adb or within android, you gotta get root be able to do disable this high-system app now if you have locked down boot loader you screwed. samsung started locking down their store and their account app extremely annoying, account constantly nagging you to sign in... i disable all ai core apps and especially gemini since you can't uninstall anymore. i hope some day someone will present a bill force this companies quit locking down this damn phone especially the apps...
    • It's basically the only web browser project not controlled by a major corporation.
    • You missed out, Ico and Shadow of the Colossus were beautiful epic masterpieces, I never got to play The Last Guardian sadly so can't really comment on that one.
  • Recent Achievements

    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      PsYcHoKiLLa
      256
    3. 3
      Steven P.
      74
    4. 4
      Skyfrog
      70
    5. 5
      +Edouard
      69
  • Tell a friend

    Love Neowin? Tell a friend!