PSP Defects Reported


Recommended Posts

Not to hate on the PSP but this is BAD. :no:

Reports are coming in that the initial shipment of PSP units is seeing some defective units getting to the public.

These defects include:

# Dead pixels, as many as 3 per screen with the problem.

# Broken UMD drives.

# Analog nubs not working.

Sony has yet to make any official announcement about any of these issues, and about how users with any of these problems can recitfy them.

Be sure to check back for Sony's response to these issues.

UPDATE: More problems ahoy!

# Analog nubs not just not working, but actually falling off.

# PSP is turned on, but does not start up.

# Screen has air bubbles.

# Screen has dust on the inside.

Also, as for the UMD drive problems, some have reported the drive not closing completely, and the UMD, when the PSP is twisted, actually flies out!

Most retailers are stressing the fact that these problems don't occur in the majority of PSPs, but take caution in importing until Sony gives an official announcement.

Also, as for the UMD drive problems, some have reported the drive not closing completely, and the UMD, when the PSP is twisted, actually flies out!

There's a video of that happening on the site.

Source: GamersAreFun.com

Link to comment
https://www.neowin.net/forum/topic/256973-psp-defects-reported/
Share on other sites

PSP as in "Poor System Portability". 

'nuff said, that thing is just expensive Sony's crap!

As usual!:rolleyes::

ABC and a half!

[EDIT] : I've just watch that tiny video, it's cracking me up! HAHAHAHA!

ABC and a half!

585096812[/snapback]

Doesn't take much to get you going does it? :woot::

Well alot of ppl said UMDs might cause problems. I have to wonder about the twisting problem though, I wouldn't be a big fan of twisting a PSP if I owned one and I don't see how it'd occur in the normal everyday transportation of it.

Those hidious and glaring problems really are too bad though, I guess where it's only in the minority of the machines its not such a huge crisis as it could be.

i highly doubt that not a single nintendo unit was shipped without a defect...

585097374[/snapback]

The stylus isn't always entitely precise and it shares the dead pixel problem.

Neither one is perfect.

edit:

I've gotta ask- why the heck would you want to twist a PSP? It just doesn't make sense.

"Know what I hate? When I bend the system like so, my game pops out. What the hell, Sony? You call this quality? I want my money back."

The difference is that you didn't have this many problems reported about the DS after it had been on sale for less than 2 DAYS. Most of these reports were floating around on Sunday

Anyway, there have been very few complaints about the DS. Some dead pixels, but Nintendo have just been replacing everything free of charge anyway.

Every single Sony product I have owned has never broke and I have had most of them for a long ass time. And why would you want to twist the thing of course something is going to happen. You you twist it and the disk pops out its your own damn fault.

I just saw it and making me laugh too.? its almost like its sticking its tongue out at you.

585097068[/snapback]

nope. its just like a toast in a toaster, when its done, out it pops. maybe the umd's done.

edit: oh yeah, if you twist the unit a bit more, the screen will start cracking. DEFECT DEFECT

That's what they get when they rush the launch, they were so desperate for a 2004 launch.

Things like dust under the screen, dead pixels and dodgy buttons have all happened to Nintendo before with various handhelds. It's to be expected in the initial batch. I remember the first batch of SP's that came out in the UK, there were dust under the screens and there was nothing you could do, same with the DS and it's dead pixels. It happens unfortunately.

I have always found my Sony products quite stable and of good build quality.

I saw this thing on TV and they was showing the best gadgets of 2005, and they took a trip to Japan, Tokyo and the guy said "Tokyo is basically the gadget / technology testing ground everything is tested here first" and well that TV show was right everything is tested there, and they clearly have some manufaction kinks to work out. Some rumours are flying that the European / US release will feature a different battery.

Anyway I'm glad I didnt import one after all. ;)

Lol this makes me a bit happy that I wasn't able to get one now.

I really hope the units aren't going to be cheaply made.

Contrary to the rest of the world, Japan doesn't think much of Sony to be honest.

In Japan, there is something called Sony Timer. It's used when you want to say something doesn't last. The reason being because Sony's products seem to fail as soon as the warranty runs out.

I like Sony's designs alot, their build quality is just a bit hyped up.

Oh and that thing about testing in Japan, guess where the Japanese test THEIR stuff, the Middle East. In Bahrain, Qatar, Dubai, etc... the latest technology is always being released either before or the same time as Japan. The testers.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • These features described above are good, but far from what developers like me was eager to get. And that main feature that developers will love it`s the ability to connect to LOCAL AI models running on Ollama. So if you have a beefy spec machine you can now use your own model 100% local inside Visual Studio 2026 18.7.0
    • Microsoft Teams is getting a controversial location tracking feature that users may hate by Usama Jawad Image generated with Microsoft Copilot Earlier this year, Microsoft planned to roll out a controversial location tracking feature in Teams, but following customer feedback, it decided to delay its release. The bad news is that the company has decided to launch it later this year, but it's based on roughly the same design that was shared earlier, which means that many users still have good reason to worry. Basically, Microsoft Places and Teams have received workplace check-ins via Wi-Fi. The idea is that if an employee arrives at the office and connects to their enterprise network, their profile status indicator will show them as being present in the office. For example, if you arrive at work, open Teams on your PC, and connect to the "Studio B" company Wi-Fi network, your Teams profile will indicate that you are present in "Studio B", as shown below: Microsoft says that this feature is basically a replacement for physical workplace check-in peripherals, it reduces the need to manually update your status, and it also enables co-workers to know that you're at work so that they can coordinate in-person meetings with you. IT admins can enable this workplace check-in capability at a tenant level, and users have the ability to control whether they want to enable it or not. Of course, all of that sounds great on paper, but naturally, many Teams customers may still have concerns, as they did before. This is because it enables your reporting manager and other members of the organization to track if you are at the office, when you arrive at the office, and where you are right now. This could be problematic for people who work in what they consider to be flexible work environments or hybrid setups, and this kind of location tracking could be considered an invasion of privacy. Microsoft has tried to alleviate some of these concerns by letting users know that they can manually set their location easily, which essentially overrides workplace check-in if they feel uncomfortable with it. However, that doesn't really solve the problem because your organization could enforce a workplace policy that mandates that this feature remains enabled. The Redmond tech giant has also assured users that this capability does not store historical data and is only a real-time indicator of location. Finally, it only generates a signal when you connect to a corporate network, which means that if you are working from home and connect your PC to your personal Wi-Fi, it won't broadcast your location to your employer; you will simply be shown as "Remote". Microsoft has encouraged IT admins to prepare for this change and begin informing users so they know what to expect once it begins rolling out later this year.
    • Wow, Microsoft IS cooking lately... This only shows that they COULD improve, they just chose not to for whatever reasons. That obsession with AI was destroying them from the inside out.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      +Edouard
      162
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      80
  • Tell a friend

    Love Neowin? Tell a friend!