Help, using Mac Bluetooth Keyboard on PC?

By gunpowda
in Apple (macOS)

 Share

Recommended Posts

Collaborator

gunpowda

Posted
Posted

I'm trying to use a wireless Mac Bluetooth Keyboard on my PC. My USB dongle is working fine - I've managed to detect and pair it with my phone, for example - but when it comes to detecting the keyboard, nothing happens.

I've turned on the switch at the back and the green LED is flashing, but it's not being discovered. Is there anything else I need to do to make it discoverable?

Thanks.

Grand Master

Martog

Posted
Posted

I didn't get the Apple Keyboard to pair with my PC using my MX900's hub nor on my iMac with the MX900 hub, seems to only like the D-Link and apple built in module. That pair of numbers is actually given to you when you connect it to the Mac, as you have to type the numbers on the keyboard to get it paired succesfully.

Veteran

[ timko ]

Posted
Posted
I've looked and apparently some guy got it working with Windows, so I believe it can be done. However...I'm using a plain USB dongle (Belkin?) with Wildcomm Drivers.

It may be worth trying to update the Widcomm drivers to the latest ones available. Read the following thread, in particular the first two posts which outline what you should do to update...

http://www.mp3car.com/vbulletin/showthread.php?t=35927

...obviously you'll have to ignore any guff about mobile phones etc ;)

Collaborator

gunpowda

Posted
  • Author
Posted

Great, thanks for the tip. I'd been looking for updated drivers.

Unfortunately it hasn't changed the pairing problem - I get that dialogue with a greyed-out input box and no pin to enter, which is really strange. Then, I get the following screen:

mac2.gif

Pity, as I'd really love to use the keyboard.

Veteran

[ timko ]

Posted
Posted

Do you have WinXP Service Pack 2 installed? I read somewhere that it's ideal to disable the SP2 built in MS BT stack somehow first before trying to use third party drivers. That could be the cause of the problem... unless you can pair other BT devices without indcidence? :)

  • 1 month later...
  • 1 month later...
Neowinian

spudly

Posted
Posted

hi

i had the same problem with the belkin bluetooth adapter, so i uninstalled the belkin software and let widows xp sp2 find the bluetooth dongle.then i asked it add devices, it found the keyboard so i tried not assignig a passkey but windows told me everything was fine but the keyboard didn't work. so i asked windows to give the keyboard a passkey, i then pressed enter and added the key, works fine now. and looks lovely set up as part of my media centre.

  • 2 weeks later...
Neowinian

Jlillia

Posted
Posted

You guys, who have got the Apple Wireless keyb work, do you mean you've got it working straight from the beginning? Meaning, you can actually log into Windows with that and don't have to wait actual bluetooth drivers to load?

'Cause I've got the problem that I've managed to pair the keyb, but it won't connect automatically. It won't even connect manually still being paired. I have to unpair the keyboard every time I boot my comp and Pair it again.

So if I had (I had ;)) a password for Windows XP, I couldn't type it with Apple wireless and I had to use separate usb-keyboard for that.

I tried those bullsonparade instructions but they didn't help. Had to go back with system restore for getting my bluetooth connection to work.

Maybe the problem is my MX900 BT hub...

Connects to two Nokia phones, Jabra BT250 headset and of course Logitech MX900 mouse. Also to keyboard but only as I described above.

Edit: couple of typos.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable

      By Copernic · Posted

      DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • EA Sports UFC 6 review: Brutal, satisfying, and surprisingly accessible to newcomers

      By Steven P. · Posted

      Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
    • The official Funny Pictures thread

      By Steven P. · Posted

    • EA Sports UFC 6 review: Brutal, satisfying, and surprisingly accessible to newcomers

      By ryansurfer98 · Posted

      Seems like Neowin has transitioned into being simps for the white house. I can't find a review for the last UFC games that came out.
    • Politically funny images of the World

      By PsYcHoKiLLa · Posted

  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated

  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      141
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      75
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!