Recommended Posts

I currently have my subwoofer under my L-shaped corner desk in my bedroom and am wondering where the best location would be for it for best sound. I think that it could sound better than what it's currently putting out.

Should I try moving it to the corner behind me? Let me know your ideas.

The subwoofer is a Klipsch Promedia Ultra 5.1.

I attached a diagram of my room setup.

Also, I have to turn the bass volume up a lot to get decent bass from where it's at right now.

post-17285-1108693251.jpg

Edited by Dennis
Link to comment
https://www.neowin.net/forum/topic/286741-subwoofer-placement/
Share on other sites

I always have mine in the same position as yours but lying on it's side so that I can put my feet on it. All depends what you're using it for though. I have mine like that so that when I'm playing a driving game it feels like im in the car with the engine noises vibrating my feet, and when there's an explosion in a game the ground shakes.

The monitor is located just about where it says desk in that picture. And yes, the subwoofer is on the floor, just curious if the desk could be blocking any of the bass or not.

585494481[/snapback]

Then, honestly, the sub is in a decent position. The only place better for it would be between the bed and the desk on the right side of your monitor. That would allow the base to hit the walls of the room more than the desk itself.

Something I've noticed with Klipsch is that it usually helps to not be right on top of it but in your case it can't really be avoided. Bass isn't directional so you have a lot of options normally though you should still try and anchor them to one of your satellites. One thing to keep in mind with the Promedias is that the sub is side firing so you may experiment with its orientation instead of placement. You should NEVER have to max the bass controls on them unless you are tone deaf. ;)

A good soundcard that is properly configured helps too.

Bass is non-directional. So placement is not crucial.

Corners and enclosed places are considered better because the low bass frequences tend to bounce off more surfaces giving a more surround solid bass Sound.

Some places tend to make the bass Boomy and echoy (Spelling?) though.

This is how I get the best sound possible with my Creative Inspire 50 something 00's. I have my Subwoofer laying down on its side with the connections facing back, the speaker up to the roof and the air exhaust, or w/e, facing toward me. And as noted, my 5 speakers spread out to add the surround feeling. By the way, the thing behind my computer table is a window.

Also, noting that you have an Audigy sound card Id recommend the KX Project drivers. They give you full control over your speakers. You can control individual sound levels, surround sound levels, bass levels, so forth and so on. I get ALOT more bass with them, and better sound.

post-13266-1108765172_thumb.jpg

Mines under the computter desk, which is a big desk, and has sides and there is the wall to bounce off of. I just tried moving it to the corner of the room, and found that the sound was way too "trebly" with the bass not underneath the sattelites as the sound seemed to be too far off. I think I get the best sound directly under the desk, enough surfaces under to bounce off of.

My roomate and i reciently changed our room around. My desk used to be in the corner of the room with the sub practically in the corner. Once it got changed it became near the middle of the wall. The bass dropped substancially. And i have a 12" 250watt JBL Northridge Series sub hooked up into my Klipsch 2.1's and its still not as strong as it was when it was located in the corner.

'

So i say corner all the way.

Logitech_Z5500.jpg

My 10'' Subwoofer.

Low Frequencies are not directional.

585495420[/snapback]

True, true.

That's why you only hear the bass from boyracers cars. Whilst they sit inside and hear it all.

Surely it would be something to do with the lower frequency's having a higher wavelength and hence diffracting more?

Just a thought.

I used to work in car Audio and Home Theater systems and Bass is non directional to a point. The best advise I ever got for placing the Sub Woofer is put it were you are going to sit and get on your hand and knees and krawl around the room and listen were the bass is the strongest then place the Woofer there, hope the wiring is long enough, hope that helped.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BATorrent 4.1.0 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 4.1.0 release notes: A community-driven release: everything here came straight from your reports and requests. It closes the remaining gaps with qBittorrent and fixes the Windows settings/tray/splash issues several of you hit. Fixed Settings now actually save. A whole class of preferences — speed limits (and the alternative limits), max active downloads, seed ratio, listen port, max connections, DHT/uTP/encryption, VPN interface, kill switch and proxy — weren't being persisted and reset to defaults on every launch. They now round-trip correctly. (Thanks to everyone who reported "the upload limit always goes back to 0".) Splash and tray toggles stick on Windows. Turning off the startup animation (or "close to tray") no longer reverts — the Windows registry stored these booleans as integers and the UI was misreading them. Close-to-tray hint. The first time the window hides to the tray you get a one-time notification, so the app doesn't look like it vanished (Windows 11 tucks new tray icons into the overflow). macOS Dock icon size. The icon filled its canvas edge-to-edge and rendered larger than neighbouring apps; it now uses the standard safe-area padding. Native file picker language. The "Torrent file / All files" filter in the open dialog follows the app language instead of being hard-coded. Added — qBittorrent parity Alternative speed limits toggle — a turtle button in the toolbar flips your throttled limits on/off instantly, independent of the scheduler. Follow system theme — switch light/dark automatically with the OS (Settings → Appearance). Pre-allocate disk space — reserve the full file size up front to reduce fragmentation (Settings → Downloads). Recheck data on add — optionally force a hash check when adding a torrent, so existing or partial files on disk are detected. Port status indicator — a 🔴 dot in the status bar shows whether your listen port looks reachable (UPnP/NAT-PMP + listen state; fully local, no external check). Add torrent from URL — File → Add torrent from URL (Ctrl+U) fetches a remote .torrent and routes it through the normal add dialog. Export .torrent — right-click a torrent → Export .torrent to save its metadata file. Already there (in case you missed it) Watch folder — auto-add .torrent files dropped into a monitored directory (Settings → Files). This release just surfaces it. Incomplete files already carry a .!bt suffix until they finish. Under the hood Regression tests for the settings-persistence and Windows boolean bugs. A new Qt Quick Test harness covering the startup splash and the design-system widgets. Download: BATorrent 4.1.0 | 37.5 MB (Open Source) Download: BATorrent Portable | 51.7 MB Links: BATorrent Website | Screenshot | Changelog Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Disabling open on hover, great! That was so stupid! They need to do a fix, where if a network share is disconnected, it doesn't hang when opening "This PC" for 20 seconds.
    • Microsoft releases major feature updates for stock Windows 11 apps by Taras Buria In addition to releasing new Windows 11 preview builds, Microsoft announced that inbox Windows apps now have dedicated release notes in the official documentation. At long last, users have access to all the release notes for each app, with changes listed in chronological order. Microsoft used to announce feature updates for stock apps with each build. Now, with Windows Insider release notes hosted on the Microsoft Learn website, each app has a dedicated space for its changelog, which is very useful for those who want to track new features and improvements. Alongside that, Microsoft dropped massive feature updates for six stock apps: Clock, Media Player, Calculator, Voice Recorder, Photos, and Paint. Each app packs quite a lot of changes and new capabilities, so here are the release notes. Here are quick notes so that you can jump to the app you are interested in the most: Calculator Camera Clock Media Player Paint Photos Sound Recorder Here is what is new for the Calculator in version 11.2605.9.0: More accurate square-root results — Fixed rare cases where a calculation that should equal zero (like sqrt(2.25) - 1.5) returned a tiny leftover value instead. Readable text in High Contrast themes — Settings text now shows the correct colors in the High Contrast Aquatic and Desert themes. Fixed layout for right-to-left languages — For languages like Arabic and Hebrew, the graph, number pad, equation fields, and scroll buttons now appear correctly oriented. Reliable launch after upgrading — Fixed an issue where upgrading from much older versions could leave outdated settings that stopped the app from opening. Here is what is new for the Camera app (version 2026.2605.7.0): Zoom slider works on more cameras — The zoom slider now works on the latest cameras, respects your system zoom settings, and updates instantly when you change those settings. Full range of zoom levels — Fixed an issue where the zoom slider only showed three steps on some devices that zoom in finer increments. Front camera works on more devices — Resolved a problem that blocked the front-facing camera on certain wide-angle devices. More video resolution choices — You can now pick video resolutions that were previously hidden; the app shows a heads-up warning instead of removing them. QR links you can still use — When a scanned QR code points to something with no matching app, the link is now copied to your clipboard (with a notification) while still offering a Store search. Smarter default settings — When you haven't set a preference, the app now follows your system settings by default. The Clock app has a massive changelog with the following improvements in version 11.2605.9.0: Timers keep counting after they hit zero — When a timer runs out, it now keeps counting up (for example, -00:27:31) so you can see how far past the time you've gone. You can turn off the daily goal — Focus Sessions now include an "Off" option so you can skip setting a daily goal entirely. New 15-minute snooze option — Alarms now offer a 15-minute snooze interval. Run up to 3 countdowns at once — The Countdown Widget now supports three simultaneous countdowns, up from two. Timer Widget notifications now appear — Fixed an issue where the "timer finished" notification didn't show when the timer was started from the widget. Less clutter in Focus Sessions — Tasks you've already completed no longer show up in the Focus Session task list. More accurate focus progress — Fixed a rounding issue that could show your daily focus progress as a minute short (for example, 49 minutes instead of 50). Smoother World Clock comparisons — The World Clock compare page now loads dates as you scroll, so it feels more responsive. Up-to-date World Clock locations — Refreshed country and city names to match their current names. Correct sun and moon icons during midnight sun — Fixed an icon that wrongly showed a moon during all-day daylight in polar regions. Fixed back-button behavior in clock comparisons — Pressing back once now takes you back as expected, instead of jumping the date to 1926. Corrected the Newfoundland time zone — Newfoundland now uses the right time zone (St. John's). Disabled alarms stay looking disabled — Editing a turned-off alarm no longer makes it appear turned on. Cleaner timer cards — The expand button is now turned off on timer cards that have no time set, preventing actions that wouldn't do anything. Clearer theme setting — Updated the wording to "Choose your preferred app theme." Smoother Settings links — The "About" links in Settings no longer trigger an unexpected "switch apps" prompt. Fixed spacing in Spotify settings — Corrected uneven spacing in the Spotify settings card. Better focus visibility in High Contrast — The focus highlight in World Clock is now clearly visible in the High Contrast Aquatic and Desert themes. No more double announcements — Screen readers no longer read the timer value twice. Countdown names read correctly — Screen readers now properly announce the name of each countdown. Keyboard focus stays put — Focus no longer disappears after you press the Timer Reset button. Clearer alarm toggle for screen readers — Tidied up how the alarm on/off switch is announced. The Media Player app received plenty of changes as well (version 11.2605.14.0): Custom captions — You can now personalize how closed captions appear, with caption styling tied to your Windows caption settings, plus a quick link to open those settings directly. "Indexing" banner in the play queue — When your media library is still being scanned, a banner now explains why some items may not appear yet. Fixed the look of selected items — Corrected a layout glitch with selected items in lists. Fewer playback failures — Improved how the app recognizes supported file types, so more files play without issues. Playlists need a name — You can no longer accidentally save a playlist with a blank name. Cleaner look for empty playlists — Improved how a playlist appears when it has no items yet. More stable play queue edits — Fixed a crash that could happen when changing the play queue while the app was switching between sessions. Clearer "missing codec" message — Improved the dialog that appears when a file needs a codec you don't have, with clearer guidance on what to do. A big update is also available for Paint in version 11.2605.61.0: Adjustable eraser transparency — You can now control how transparent the eraser is. Cleaner stamp brush strokes — Fixed visible color shifts and artifacts when using stamp-style brushes. JPEG photos save in place — Opening a rotated JPEG and pressing Save now overwrites the original instead of unexpectedly prompting "Save As." No more crash on bad image files — Opening a damaged or invalid image, from within the app, by double click, or commandline, now shows a clear error message instead of closing the app. Classic selection behavior restored — The selection outline now hides while you move, resize, or rotate a selection, just like in classic Paint. Tidier AI image panel — Fixed missing spacing at the bottom of the AI image generation panel for a cleaner layout. Visible button hover in light theme — Toolbar split buttons now show a clear hover highlight in the light theme. Snappier toolbar — Streamlined how the ribbon lays out, giving a small speed boost at startup. Fewer background crashes — Fixed a crash that could happen while background tasks were finishing up. Stable app shutdown — Prevented rare crashes when closing the app. Fixed layer removal glitch — Deleting the active layer no longer leaves the layers list in an inconsistent state. Here is what is new in the Photos app (version 2026.11060.2004.0): AI watermarking — AI-generated or edited images can now carry a visible Copilot watermark. You choose Never, Always, or Ask Every Time in Settings, with a confirmation when saving. The watermarking is off by default in settings. Better viewing of small images and pixel art — Tiny images (like 16×16 pixel art) now zoom in far more to fill the screen and stay crisp instead of looking blurry. Select scanned text with the keyboard — When text is detected in an image, you can now navigate and select it using the arrow keys, Shift+Arrow, Home/End, and Ctrl+A, with a clear focus highlight. Fixed a crash in text recognition — Resolved a crash that could close Photos while detecting text in images; the app now recovers gracefully. Easier keyboard navigation — Tabbing through the navigation bar no longer stops on hidden controls, so it takes a single Tab to move past it instead of three. And finally, here is the Sound Recorder (version 11.2605.1.0): Waveform shows with Bluetooth mics — The live waveform now displays correctly when you record using a Bluetooth audio device. No more stray scrollbar — A non-working horizontal scrollbar no longer appears at the bottom of the waveform unless you've zoomed in. Mark button ready right away — The Mark button no longer looks grayed out until you hover over it after opening the app. Markers hidden for WAV files — Markers are now turned off for WAV recordings, since that format can't store them — so they're no longer lost silently. Smoother deleting — Quickly pressing Delete and Enter to remove several recordings in a row no longer triggers a "file doesn't exist" error. Fixed a memory issue — Resolved a memory leak that occurred each time a recording started. You can find all these changelogs in the official documentation here.
    • again, an article about Microsoft Edge and ridicules hater's comments
    • From this very same article: "For organizations that prefer a “more deliberate pace”, the Extended Stable channel remains an option."
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      PsYcHoKiLLa
      170
    3. 3
      +Edouard
      162
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      78
  • Tell a friend

    Love Neowin? Tell a friend!