How to maintain a healthy Windows System


Recommended Posts

Heres something that I have found works for me: Whenever your PC starts getting sluggish, youve installed countless programs and uninstalled them but theres trails of crap all over the place, your system is infected, and youve had enough...

Format.

Honestly, if you own Windows, you must learn the art of formatting. Make sure you have one partition where you just put your system files and nohing else (well, maybe your program files - just the stuff you can reinstall) and put everyting else such as your documents and personal files (games, savegames etc) on another. That way, when you too feel the windows slug creepng up on you, just make sure theres no crap on your files partition, make sure theres no valuable stuff on the system partition worth saving, and format.

Simple.

Apart from that, I think that guid doesnt miss out on much.

Except perhaps the advanced user's tweaking routine (disabling / tweaking system stuff, slipstreamed installations, special programs etc)

Good stuff!

Heres something that I have found works for me: Whenever your PC starts getting sluggish, youve installed countless programs and uninstalled them but theres trails of crap all over the place, your system is infected, and youve had enough...

Format.

Honestly, if you own Windows, you must learn the art of formatting. Make sure you have one partition where you just put your system files and nohing else (well, maybe your program files - just the stuff you can reinstall) and put everyting else such as your documents and personal files (games, savegames etc) on another. That way, when you too feel the windows slug creepng up on you, just make sure theres no crap on your files partition, make sure theres no valuable stuff on the system partition worth saving, and format.

Simple.

Apart from that, I think that guid doesnt miss out on much.

Except perhaps the advanced user's tweaking routine (disabling / tweaking system stuff, slipstreamed installations, special programs etc)

Good stuff!

585677693[/snapback]

I was toying with including formatting. I might do, I figured that if you don't know how to stop adware,you probably can't reformat.

Nice guide. These things are helpful for almost everyone. The only people ya can't help are the ones who never do anything but blame M$ and the ones who just know everything already.

Someone mentioned CrapCleaner, it deserves 5 stars and it's freeware.

Ad-Aware and Avast should be in everyones toolbox. They are freeware.

Registry Mechanic with Tune-up Utilities and RegSupremePro, I use them in that order so that what one misses the next finds. Registry Mechanic is freeware but the other two are shareware, fully functional for their trial period though. They are my choice for cleaning-compacting my registry because I don't know what all those registry entries mean or do. I have had it once that RegSupremePro turned up 760 invalid keys and/or values. There is no way that I could ever find out what each and every one meant or did. My options, forget it, try to figure out the maybe 10% that appear to be written in a language I can figure out, or close my eyes, hit clean and hope for the best. With many registry tools I have tried, that last option meant get ready to re-install. With the three I've mentioned I have never had a problem. What keys and values they turn up are actually wrong, and can be repaired or removed.

Perfect Disk was mentioned in an earlier post and of the defrag apps out there it is the best in my opinion. After Perfect Disk you'll never use M$ defrag again. I have tried every defrag app that I've seen and none measure up, some even make things worse. Norton and System Mechanic are two that just don't make it. After defragging with System Mechanic once I re-did it with perfect disk and was shocked at how much difference there was. And I like System Mechanic, there are some really useful utilities in that package that do work fine.

Keep it up Nighthawk-F117, Guides like this are important. At least I sure can use it.

Nice guide. These things are helpful for almost everyone. The only people ya can't help are the ones who never do anything but blame M$ and the ones who just know everything already.

Someone mentioned CrapCleaner, it deserves 5 stars and it's freeware.

Ad-Aware and Avast should be in everyones toolbox. They are freeware.

Registry Mechanic with Tune-up Utilities and RegSupremePro, I use them in that order so that what one misses the next finds. Registry Mechanic is freeware but the other two are shareware, fully functional for their trial period though. They are my choice for cleaning-compacting my registry because I don't know what all those registry entries mean or do. I have had it once that RegSupremePro turned up 760 invalid keys and/or values. There is no way that I could ever find out what each and every one meant or did. My options, forget it, try to figure out the maybe 10% that appear to be written in a language I can figure out, or close my eyes, hit clean and hope for the best. With many registry tools I have tried, that last option meant get ready to re-install. With the three I've mentioned I have never had a problem. What keys and values they turn up are actually wrong, and can be repaired or removed.

Perfect Disk was mentioned in an earlier post and of the defrag apps out there it is the best in my opinion. After Perfect Disk you'll never use M$ defrag again. I have tried every defrag app that I've seen and none measure up, some even make things worse. Norton and System Mechanic are two that just don't make it. After defragging with System Mechanic once I re-did it with perfect disk and was shocked at how much difference there was. And I like System Mechanic, there are some really useful utilities in that package that do work fine.

Keep it up Nighthawk-F117, Guides like this are important. At least I sure can use it.

585702337[/snapback]

Posts like that are the ones that make the guide worthwhile. Thanks :)

Hey Nighthawk-F117,

Thanks for the Guide. It's very informative! and I'm going to bookmark it. I think that we should make this a post-it so users can have easy access to it!

Frank :D

585791649[/snapback]

Thanks :D

Forget what I said earlier. :)

  • 2 weeks later...

I have a couple suggestions for the software list and a couple questions as well.

BlackViper's site is down (I presume for upgrading purposes). Though there's a couple other ones. You can also find BlackViper's sp2 configs in Google's cache.

Have you ever tried O&O Defrag? I think it's pretty good and allows you to defrag different ways (name, most accessed, normal, etc..). Though I'll give Perfect Disk 7 a try and see how it compares.

Another good free firewall is Kerio Personal Firewall. Though it has a slight learning curve. It won't shine brightly till you setup all the rules for it to follow. (if you don't every time a application is launched or something wants to access the internet the firewall will ask you if you wish to permit or deny it).

Use a normal user account for everyday use, only use the administrator for installing an aplication or to change a system-wide setting.

and don't install codec packs,

do not install shareware/trialware programs, first search for opensource/freeware alternatives that also do the same and fits your needs. like photoshop vs the gimp...

If you like your current installation and everything is going smooth make an image of your installation with partimage http://www.partimage.org/

  • 2 weeks later...

I've just added a massive update and reworded most of the thread.

I've rejiged the firewall and antivirus bit. Added service pack 2 info, ccleaner, hijack this. And much more. I worked most of this afternoon to do this, so please, gimme some feedback. :)

-Enjoy!

Same HERE!!!!

OH and I love Tune Up utilities! I use it all the time!!!

585567215[/snapback]

I like/use Diskeeper Lite also but it kept popping up and asking me defrag when I didn't need/want and to upgrade to the pro version. You can stop this behavior by setting it to run only when you want it too by going to Control Panel>Administrative Tools> Services and then changing it from Auto to Manual. That way it will only run when you want it too by clicking on the Diskeeper program.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • There might be some passive design improvements (cooling, etc), but I doubt they'd change the core performance spec of the hardware mid-generation when they've already got a new console in development.
    • State of Decay 3 is out in 2027, reveals Plague Nests with new co-op gameplay trailer by Pulasthi Ariyasinghe A few months ago, Undead Labs broke its silence about the third entry in the State of Decay series since its announcement in 2020. Today, the studio had a brand-new trailer to reveal at the Xbox Games Showcase, finally giving players a look at the Unreal Engine 5-powered title. A broad 2027 release window is now attached to State of Decay 3 too. The studio confirmed that every scene seen in the gameplay trailer (except for the studio logo) released today is from the game with no cinematic footage. "The quality bar of the moment-to-moment experience is higher than anything we’ve achieved in Undead Labs’ history," says the studio. "State of Decay 3 is being built in Unreal Engine 5, and we’re creating better quality versions of what makes our game the survival sandbox it is, and the combat experience is really, really important to us, and I think you can see it coming through in this trailer." One new aspect of this upcoming entry is the Plague Nests. These are supposed to be dynamic, dungeon‑like enemy hubs with varied “personas” that change tactics each time one appears on a map. These areas will have the best loot in the game for players brave enough to tackle them. The combat system is being overhauled too, letting players do quick and power attacks depending on the situation. This isn't just on the player's side though, as zombies themselves now have multiple new types of behaviors depending on how fresh or decayed they are. "All of these play very differently, especially as you start getting outnumbered or when you’re making noise and running around and trying to save your rear end or the rear end of your friend next to you," adds the developer. Of course, settlement building and community management are massive parts of this third entry too. These are being further expanded with the cooperative focus, giving players much more freedom for playing together than in State of Decay 2. Players will even be able to split up and build settlements in different areas of the same map with different goals. Undead Labs confirmed that playtests are already ongoing for the title, and interested players can sign up to participate by heading over here once more slots open up ahead of the full release. State of Decay 3 is coming out on PC, Xbox Series X|S, PlayStation 5, and Xbox Game Pass sometime in 2027.
    • Doom: The Dark Ages Revelations expansion gives the Slayer a brutal Chain Spear by Pulasthi Ariyasinghe Last year, id Software released Doom: The Dark Ages as a prequel to its reboot series, offering a look at the legendary Slayer character during an ancient war between Hell and Heaven. Today, at the Xbox Games Showcase, id Software returned with a new announcement that unveiled Doom: The Dark Ages Revelations as its first story expansion. The expansion will see the Slayer being betrayed and cast into a "merciless purgatory only escapable by confronting haunting truths." Somehow, there is one ally in all this chaos seemingly attempting to help our protagonist escape his fate. Players will be ascending this prison and fighting plenty of new demons and abominations as they work to free the Slayer's followers. One new aspect of the expansion will be the Chain Spear. This new weapon is described by the studio as a "uniquely satisfying combat system that rewards mastery with a potent combination of power and mobility." Check out the trailer below to see the new weapon in action, where the Slayer is seen using it to even pin enemies to walls. id Software is also preparing a free update to all owners of Doom: The Dark Ages that will land alongside the new paid expansion. Dubbed the Ripatorium 3.0 update, this will add more customization options, an improved pass code generation system, and preset options for players diving into the game's arena challenge mode. Expansion buyers will also receive additional maps, demons, and new weapons to use in this mode in addition to the story levels. Doom: The Dark Ages Revelations expansion is out on July 7 across PC, Xbox Series X|S, and PlayStation 5 with a $19.99 price tag. Those who own the Premium Edition or the Collector's Bundle will receive the expansion for no extra cost as well.
    • Hyped for this. Replayed the remasters recently and they're so well done, and Crash 4 was great too. I trust this team to deliver.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      PsYcHoKiLLa
      248
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      68
    5. 5
      ATLien_0
      67
  • Tell a friend

    Love Neowin? Tell a friend!