[guide] how do i use visual styles?


Recommended Posts

alright fellow neowinians...i used tp post this guide about once a week for new peeps on neowin so i decided to make a new and updated guide for you all smile.gif

thanks to uxtheme rafael aka vortex, larney and dreamz for collaborating with me.

this guide actually contains 3 methods on howto replace the uxtheme.dll and enable the theme-service under windows.

----------------------------------------------------------------------------------------

Using the offcial Neowin Uxtheme Patcher:

https://www.neowin.net/forum/index.php?showtopic=140707

It patches the UXTheme.dll for Windows XP/SP1/SP2 Beta/RTM and 2003 and allows you to use un-signed custom visual styles.

To simply patch the UXTheme.dll file, run the program, it will determine your operating system, then patch the appropriate file and reboot your PC.

To un-patch the UXTheme.dll file, run the program again, and it will un-patch the .dll and then reboot your PC.

official thread here: https://www.neowin.net/forum/index.php?showtopic=308905

This program will patch your uxtheme.dll file so you can use any 3rd party visual

style on Windows XP/SP1/SP2 and Windows Server 2003/SP1. File protection dialogs should

be cancelled and a reboot is required after using this patch.

Patched Windows XP and Windows Server 2003 systems with this program can be unpatched by

running this program again.

What's new in version 4.0

-Added 64-bit support (not 100% work)

-Added few delay (about 2.5 seconds) in some tasks to make it done before doing next

task (which I assume it solve some issues)

-Added Windows Server 2003 SP1 support

-Added stopping Themes service during patching for more success chance

http://www.windowsx.cc/download/nw_uxpatcher.zip

----------------------------------------------------------------------------------------

Larneys Guide:

1) Rename uxtheme.dll in C:\Windows\System32 to uxtheme.dll.old

2) Put the NEW uxtheme.dll into C:\Windows\System32

3) Reboot and delete uxtheme.dll.old (or just leave it be as backup)

----------------------------------------------------------------------------------------

insanekiwis guide:

Q: what do i need?

A: replacer app, uxtheme.dll, 2 minutes of your time.

anyway let's get started:

1) open cmd/run, type "winver" without the quotes and you'll see what version/built you have

2) hop over to http://www.vortex-scratchpad.info/reposito...atches/Uxtheme/ and get the uxtheme.dll for your windows built/version

3) then jump over to http://www3.telus.net/_/replacer and get replacer (it comes with a readme/guide so it's pretty easy to use)

4) execute it, drag'n'drop c:\windows\system32\uxtheme.dll on it, it will create a

backup for you automatically aswell.

5) then drag the NEW uxtheme.dll file on replacer so it gets replaced with the new one.

6) reboot.

7) put the visual style files in C:\WINDOWS\Resources\Themes,i.e.

C:\WINDOWS\Resources\Themes\THEMENAMEHERE

now your themes should be visible in the appereance tab.

apply the visual style of your choice.

done.

i hope this guide is easy to understand. i made it for those who tried the neowin

uxtheme patcher and it didn't work or for people who just don't know (yet) howto handle this little task or don't wanna use 3rd party software like tgtsofts' stylexp.

-insanekiwi

oh and please, don't ask or spam this guide. i don't want it to grow as big as the old one.

i also attached the replacer app in case the replacer website goes down again.

enjoy! happy patching :D

****UPDATE****

all mirrors are down, i put up the files i still had here: http://insanekiwi.is-pimp.com/thumbnails.php?album=11

if you got more files or can host additionally, message me.

Replacer_2.57.zip

Replacer_old_2.37.zip

Edited by insanekiwi
Link to comment
https://www.neowin.net/forum/topic/312381-guide-how-do-i-use-visual-styles/
Share on other sites

Is there a tool around that does kind of the same thing as style xp? just a app that cracks the memory somehow to enable themes. I wanna use it for school. Because if we reboot there al system files are returned to normal., so uxtheme patch wont do any good. And style xp is to big and take to much effort to install... Just need a simple app.

Sorry if its a wrong question in this thread...

shane: have you tried using the neowin uxtheme patcher? it should determine which version you have and patch the file automatically.

it looks like sp2 rtm + sp3 hotfixes = gdr. i might be wrong tho.

shane: have you tried using the neowin uxtheme patcher? it should determine which version you have and patch the file automatically.

it looks like sp2 rtm + sp3 hotfixes = gdr. i might be wrong tho.

585831091[/snapback]

Your correct. A new KB by Microsoft makes your version look strange like that. Nothing to worry about I'll talk to Rafael about putting that on his site as well.

Some problems with XPPro x64 RTM from MSDN here....

I've tried all the patchers, tried to manually patch using both the newest and an older version of replacer, but nothing is working.

Replacer gives me a copy file failed error.

The patcher just asks me to reboot, and after a full reboot, I still cannot use any themes.

Pretty frustrating. Anyone noticed this with XP x64 and actually got it working? I saw a couple of people posting about this same exact issue, but no fixes, just that replacer should work. But it obviously isn't for everyone. :(

Thanks...

im not seeing my windows version... closest one i see is in XP/SP2 Alpha whichi is 5.1.2600.1154... heres a SS of my windows version. Am i just missing sumthing?
Your correct. A new KB by Microsoft makes your version look strange like that. Nothing to worry about I'll talk to Rafael about putting that on his site as well.

I have the same version - So there is no appropriate version at Rafael's site? Can someone post here when there is? Thanks.

  • 2 weeks later...

I have some difficulties with patching uxtheme.dll. There are no .dll files for my OS at http://67.20.160.236:8080/repository/?path=Patches/Uxtheme/ nor patcher (UXTheme Multi-Patcher (Neowin Edition) 4.0) makes it work. I followed guides from every single FAQ here and still system hangs when it runs services during start (when login screen shows). Any ideas?

Thanks for help.

--Konnekted

post-111288-1116685182.jpg

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Louis Rossmann suing Samsung over "990 Pro SSD warranty scam" by Sayan Sen Back in 2023, if you recall, Neowin reviewer Robbie Khan had a dispute with Samsung over his 990 Pro SSD, which was rapidly losing its health. After significant back and forth, the tech giant had finally released firmware to "stop" the issue. Interestingly, its previous flagship at the time, the 980 Pro was also facing problems leading to two consecutive sets of firmware fixes. Three years later, it looks like a similar conflict has now broken out between tech repair entrepreneur YouTuber Louis Rossmann and Samsung, as it has escalated into a threatened lawsuit after the company allegedly refused to appropriately replace a failing 990 Pro SSD that remained under warranty. According to Rossmann, a 4TB Samsung 990 Pro NVMe SSD purchased for approximately $330 less than two years ago, began experiencing major hiccups and issues, even though he claims it had been operated under ideal cooling conditions. It was installed in a RAID 1 array and cooled by a heatsink and dual high-speed fans. However the drive reportedly started dropping out of the array, exhibiting controller-level failures that eventually became not useable in any meaningful way. Rossmann said Samsung’s support process was marked by delays and confusion from the very start. After initially contacting the wrong regional support channel, he was redirected to Samsung’s memory support division where he submitted detailed diagnostics, logs, and proof of purchase. Rossmann runs a repair company and owns an ACE Lab PC-3000 machine, which is a professional-grade data recovery equipment. As such, he had been confident in his diagnostics. Samsung even seemingly acknowledged that later. Regardless, Rossmann claims that his initial support ticket was automatically closed before a full 24-hour response window had elapsed, forcing him to reopen the case and resubmit documentation. The controversy however intensified further from here after Samsung accepted the drive for warranty evaluation but later returned it with a repair report stating that the drive had passed its testing and that the SSD had been verified as functional. Rossmann strongly disputed those claims citing that his own independent testing on PC-3000 showed write speeds reducing to as low as 40–60 MB/s before the drive failed entirely. Samsung subsequently informed him that the SSD had been reset and reflashed, passing internal stress tests. However, the company also stated that replacement units were unavailable due to an industry-wide memory shortage and suggested that a refund process could be initiated if further testing confirmed the fault. Thus, to settle, the company offered a refund of $330, the amount that was initially paid by him to make the purchase. Here, Rossmann pointed out the seeming hypocrisy of the tech giant as in how no Samsung drive was apparently allocated for warranty replacements, but they were abundantly available for retail sales especially when using business accounts. As you can see, Rossmann is indeed right, there are Samsung 990 Pro 4TB SSDs on Amazon currently for $950 (shipped and sold by first-party Amazon US itself), and they are also available on Samsung's own store too, albeit for an even higher price of $1100. Thus Rossmann argues that Samsung’s inability or unwillingness to provide a replacement while the same model remains available for purchase at significantly higher market prices reflects a failure to honor its warranty obligations. He has issued a formal 60-day notice and says he intends to file suit in Texas small claims court, asserting that companies should face greater costs for denying legitimate warranty claims than for fulfilling them. You can check out the full video titled "Samsung's 990 Pro SSD warranty policy is a scam; I'm taking them to court," at the link below. Source and image: Louis Rossmann (YouTube) As an Amazon Associate we earn from qualifying purchases
    • Was it too much to ask to show the icon in this article?
    • Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use this unofficial tweak tool to enable it because it actually isn't available to you yet officially and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
    • Thank you. Will do. I read in the release notes that editor config might be at play here.
    • Actually, I think even Microsoft doesn't know how to control it
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      PsYcHoKiLLa
      185
    3. 3
      +Edouard
      158
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!