[Definitive] Xbox 360 Thread


Recommended Posts

When the XBox came out I got it for $230.00 with 3 games

586747480[/snapback]

That is simply impossible. The Xbox came out at $300, and the games were all $50 each. You did not get it for $230 when it came out, and you couldn't even get that for $230 today, unless all 3 games were Platinum Hits.
That is simply impossible.  The Xbox came out at $300, and the games were all $50 each.  You did not get it for $230 when it came out, and you couldn't even get that for $230 today, unless all 3 games were Platinum Hits.

586747844[/snapback]

Well I hate to tell you but a friend just bought a plain Xbox for $ 159.00 at Walmart. I didn't say I bought mine on day one that the XBox was released, and it came with crap games like motoross, some car driving game.

Inept analogy for the following reasons:

|free XBL trial.

|it includes 4 games not 3.

|2! Wireless controllers.

|play and charge+extra battery pack.

|Vastly supirior(sp?) gaming console with cutting edge tech.

|20GB instead of an 8GB harddrive.

|Media remote.

|Headset.

|Highdef cables.

|ethernet cable.

|3x230=roughly 800

|4 games+extra controller+play and charge+battery pack+premium console=$800. Your getting a deal here and you don't even see it.

In conclusion, shut up.

586747825[/snapback]

Fine go waste your money, I WONT, So Eat me.

Fine go waste your money, I WONT, So Eat me.

586747869[/snapback]

I would eat your brain, but clearly someone has beaten me to it. :)

And damn you guys, how come you guys get games for 60? Is it just exchange rates or is there something dodgy in Australia, as ours are 90

Is there an email address or something where I can ask whether or not we need Media Center Edition to stream video? As I can't help but feel that we're getting screwed over if it supports Photos/Music but Video requires Media Center (I can understanding for wanting to stream live tv, but just plain old videos should be the same as the other 2 formats?). And perhaps ask them what formats as well..(I seem to remember reading WMV9, but can't find it anymore..)

Driving me nutts. :(

Edited by Pc_Madness

As someone else said, it would be near impossible to go through the 40 some odd pages posted in here, but the question I have is a simple one.

In the US, I know the whole deal with the pre-orders, but I am wondering if there are any retail outlets that are not taking pre-orders and just selling them to people the day (or night) of the launch. If so, what are the places that will just be selling them?

TIA, DL.

As someone else said, it would be near impossible to go through the 40 some odd pages posted in here, but the question I have is a simple one.

In the US, I know the whole deal with the pre-orders, but I am wondering if there are any retail outlets that are not taking pre-orders and just selling them to people the day (or night) of the launch. If so, what are the places that will just be selling them?

TIA, DL.

586753772[/snapback]

Why? Some people have read over a 180 Page before on some forums (Djipi's Cel-Zelda Thread over at EmuTalk if you must know).

40 pages is nothing.

Why? Some people have read over a 180 Page before on some forums (Djipi's Cel-Zelda Thread over at EmuTalk if you must know).

40 pages is nothing.

586754198[/snapback]

First off, correct me if I am wrong, but was I asking for your opinion on wether or not I have time to read 40 pages?

Second off here is why... Because I work a full time job, which I happen to have posted my question from work as well, so NO. Sorry, I do not have the time to read 40 pages, never-mind 180 pages, especially when my question can simply be answered by another COOL member.

You my friend are missing the main point of Neowin, at least the way I have always seen it and why I started posting here to begin with, and that is people help each other and CAN ask questions. Luckily there are still some members willing to HELP people when they ask a simple question.

So congratulations on reading some 180 page thread related to Zelda im some way. I am glad you have that time to waste in your life. I do not, I am making a living, so if someone is kind enough to answer my question, than so be it. If not, life goes on.

Edited by DirtyLarry
I know of one place so far, but probably all retail outlets like them.

Walmart

I would think Target, Kmart, and the like will be the same way, but maybe not the 12am deal.

586754858[/snapback]

Most Definitely Thank You My Man. (Y)

As someone else said, it would be near impossible to go through the 40 some odd pages posted in here, but the question I have is a simple one.

In the US, I know the whole deal with the pre-orders, but I am wondering if there are any retail outlets that are not taking pre-orders and just selling them to people the day (or night) of the launch. If so, what are the places that will just be selling them?

TIA, DL.

586753772[/snapback]

I know of one place so far, but probably all retail outlets like them.

Walmart

I would think Target, Kmart, and the like will be the same way, but maybe not the 12am deal.

I know of one place so far, but probably all retail outlets like them.

Walmart

I would think Target, Kmart, and the like will be the same way, but maybe not the 12am deal.

586754858[/snapback]

i know for sure Best Buy, and would assume Circuit City as well

And where does it say that it comes with three games?  I know how much an Xbox costs today, and I know how much it costed when it came out.

586756003[/snapback]

If you reread everything I said I got mine for $230 with games and that my friend just bought one for $150. And it was said that you "cant get one today for that amount."

Does anyone know is the 360 gives off a lot of fan noise/disc noise? I want to know, 'cause I need to decide if I'm going to use it for DVDs like I used my slim PS2. Can't be doing with a loud DVD player.

586763247[/snapback]

I'm being serious here, is it that big of a deal? Do you watch your movies on extremely low volume or something?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
    • I still use HexChat! Not really as ancient as the 1994 AutoCAD above my post, but I have never found anything better to replace it. Yes we still operate an IRC server https://www.neowin.net/irc/ 😛 
    • At work we still have a couple of people that use a version of AutoCAD LT purchased in 1994. This predates Windows 95 and works fine on versions of Windows up to XP. Its long since run in an locked down isolated XP VM, accessible via RDP. I did install LibreCAD for them, however they said it was just too different to get to grips with. In all fairness one of them is now 75 and the other is almost 60.
    • On my music making (non internet) PC Sony Acid Pro 7.0 Adobe Audition 2015 Korg Legacy Collection Windows 7 SP1
    • Anyway to download these versions without being on the Experimental builds?
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!