Recommended Posts

This'll be great when the time comes that we can effectively harness fusion reactions for energy production, but it isn't going to address any of our near-term needs.

Fission reactors don't have to be constructed in the "current" manner (the "Three Mile Island" ones most people commonly think of). Pebble-bed reactors remove a great many risks... are they perfect, no... but they could be used in the short term to provide a much safer form of energy.

http://www.wired.com/wired/archive/12.09/china.html

:cool:

Poor choice of location.  There are a lot of countries that could use the energy more than France.  I would rather see it in Japan, Korea, the U.S., or Germany.

586134160[/snapback]

It won't be connected to the power grid. It is a test reactor that will only operate for half second durations and the results will be monitored.

Fusion is combining two simple elements into a more complicated one.

The ultimate goal with Fusion is to combine Hydrogen and Oxygen so that the "waste" product is water.  The trick is to do this at reasonable temperatures.

586133646[/snapback]

No that is incorrect, that is not how it works, fusion is how the sun works for example, the great amount of mass pushes hidrogen atoms to tightly that they make a new element helium, but the trick is that some of the mass of the hydrogen "transforms" to energy (E=M*C*C). Fusion is more efficint than fission and can generate lots of energy that is why it's so difficult to control, literally nothing can stand the heat produced, so the only way to contain the energy is with giagant magnetic fields, but to the date the needed energy to mantain those fields is much more than the one produced by the reactor itself.

It won't be connected to the power grid.  It is a test reactor that will only operate for half second durations and the results will be monitored.

586134182[/snapback]

Wasn't aware of that...but then why France? Then you'd think they'd do it in Japan with more technical resources. Maybe closer to EU HQ in Brussels...its just that southern France strikes me as an extremely odd location.

Nice. Somday, Fusion will replace fission. And after that, Anit-Matter reactors!

From what i understand, fusion produces much less waste than fission does.

586131533[/snapback]

To expand on what Matt said, a fusion reactor only produces radioactive materials when you stop the reactor and dismantle it. During operation, a fusion reactor produces only energy and steam iirc.

No that is incorrect, that is not how it works, fusion is how the sun works for example, the great amount of mass pushes hidrogen atoms to tightly that they make a new element helium, but the trick is that some of the mass of the hydrogen "transforms" to energy (E=M*C*C). Fusion is more efficint than fission and can generate lots of energy that is why it's so difficult to control, literally nothing can stand the heat produced, so the only way to contain the energy is with giagant magnetic fields, but to the date the needed energy to mantain those fields is much more than the one produced by the reactor itself.

586134211[/snapback]

I wasn't "wrong". Fusion does fuse together lower order elements to make a higher order element.

I did say "the ultimate goal" of fusion was to combine hydrogen and oxygen to make water as a "waste" product.

I wasn't "wrong".  Fusion does fuse together lower order elements to make a higher order element.

I did say "the ultimate goal" of fusion was to combine hydrogen and oxygen to make water as a "waste" product.

586134568[/snapback]

Ok, sorry , then it's my mistake :p, I tought that when you said water as as waste product you meant like a direct product of fusion, because fussioning water and oxigen does not generate water.

perhaps you could explain me how they are going to use fussion to generate water, because i tought the ultimate goal is to heat water to move turbines to generate electricity

Edited by MEMO.INC
The ITER will not produce any actual electrical energy or anything.  This is just a test reactor that will be activated for about half a second at a time.

We are some time away (probably still decades) before we have cheap, clean, nuclear fusion.

Canada pulled out of the ITER partnership because the prospects seemed dim (to make a bit of a pun about electrical power generation).

586132391[/snapback]

I thought the purpose of the ITER was to produce a reactor that can self-sustain a fusion reaction, hence producing power. There are already fusion reactors around the world used to study the reaction for small amounts of time.

Also, E=MC^2 has nothing to do with nuclear reaction. It has to do with the theory that light (photons) and matter are the same and that they can be converted from one form to the other.

PS. I think this should be in BPN rather than NFN since I wouldn't consider this "nerd-free".

Edited by MrA

When you have any nuclear reaction, you measure the mass of the reactants compared the mass of the products. In order to conserve energy, the mass must have been converted to energy. You use E=mc^2 to determine the energy released. Strictly speaking, E=mc^2 should be written as delta(E)=delta(m)c^2; i.e., you can only look at changes in mass/energy and not absolutes.

With fission, you bombard a nucleus with neutron(s). The nucleus absorbs the neutron and splits into various fragments. There is no way to determine what the fragments will be; you can give probabilities on them only. In addition, more neutrons are emitted (usually 2 or 3), and hence you get a chain reaction. The more common products have long half lives. In fission reactors you also have control rods and moderators that absorb and slow neutrons. These rods/moderators also tend to become radioactive as they aborb neutrons.

Hydrogen fusion (in stars) is much more predictable, and you always end up with hydrogen (heavier) or helium. In fusion reactors, the material shielding or containing the reaction would generally become radioactive, as beta (electron) particles are emitted in fusion.

Overall, fusion is much cleaner than fission and gives higher energy yields. However, as stated, fusion requires extermely energetic particles to collide while fission performs better with slow (and less energetic) neutrons.

Matter/anti-matter reactors would be the most effecient form of energy conversion, as the the entire particle/anti-particle pair is converted completely into 2 photons (in the case of electrons/positrons). Antiparticles are made all the time. But in order to do so , you need to have high frequency/energy photons. So again, you would require far more energy to get the reaction going than would be produced :(

I thought the purpose of the ITER was to produce a reactor that can self-sustain a fusion reaction, hence producing power.  There are already fusion reactors around the world used to study the reaction for small amounts of time.

...

PS. I think this should be in BPN rather than NFN since I wouldn't consider this "nerd-free".

586135158[/snapback]

"ITER will use a hydrogen plasma torus operating at over 100 million degrees Celsius. It is designed to produce approximately 500 MW (500 million watt) of fusion power sustained for up to 500 seconds (compared to JET's peak of 16 MW for less than a second). ITER will not generate electrical power."

http://en.wikipedia.org/wiki/ITER

Yes, science is a little nerdy but since it does not directly involve personal computers and we don't currently have a Science forum and it is news. NFN is the best fit.

lol, third time you've had to post that.

586135687[/snapback]

+1

(I did make an error though, I said it would only sustain it for half a second. It will actually sustain it for up to 500 seconds)

The ITER will not produce any actual electrical energy or anything.  This is just a test reactor that will be activated for about half a second at a time.

We are some time away (probably still decades) before we have cheap, clean, nuclear fusion.

Canada pulled out of the ITER partnership because the prospects seemed dim (to make a bit of a pun about electrical power generation).

586132391[/snapback]

If this is the case, then I take issue with the title of this thread.

ITER isn't the first fusion reactor in the world. Hell, Princeton Plasma Physics Laboratory (PPPL) had the Tokamak Fusion Reactor running 23 years ago. Now they've got the National Spherical Torus Experiment.

If this ITER reactor is just another test reactor, what's the big deal?

If this is the case, then I take issue with the title of this thread.

ITER isn't the first fusion reactor in the world.  Hell, Princeton Plasma Physics Laboratory (PPPL) had the Tokamak Fusion Reactor running 23 years ago.  Now they've got the National Spherical Torus Experiment.

If this ITER reactor is just another test reactor, what's the big deal?

586137572[/snapback]

I agree with your point. The thread title is somewhat misleading. Nuclear Fusion is not a practical reality in 2005 (or, really, anytime soon).

[Thread Title Edited]

I'm not sure what the big deal is. Canada pulled out of the project because the costs seem to outweigh the benefits. You could build 10,000 MW worth of offshore wind generators for the cost of this project. At least that would produce practical renewable power. It is going to be a long time before Nuclear Fusion generates 10,000 megawatts.

Wasn't aware of that...but then why France?  Then you'd think they'd do it in Japan with more technical resources.  Maybe closer to EU HQ in Brussels...its just that southern France strikes me as an extremely odd location.

586134213[/snapback]

Well,...I sure would'nt want it in my Country...if a 'chain reaction' went uncontrolled and uncontained....they might be using France to park BMWs/Porches/Audi's....you'd think they pick a country with more Technology..but then on the other hand...LOL

Matter/anti-matter reactors would be the most effecient form of energy conversion, as the the entire particle/anti-particle pair is converted completely into 2 photons (in the case of electrons/positrons). Antiparticles are made all the time. But in order to do so , you need to have high frequency/energy photons. So again, you would require far more energy to get the reaction going than would be produced :(

586135638[/snapback]

Reminds me of this Omega particle Star Trek Voyager was talking about in one of its episodes. The Vulcan (Hot woman) was disappointed when she was unable to extract it or something...

Im still doing my A Level course on Nuclear Physics so it might be interesting to see how the things work. I only have the jist of it all.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Surprise Execs are dumb. I hope the rehired engineers said were not coming back until we get 2x our salary.
    • Ford execs say they made a mistake when they replaced human engineers with AI by David Uzondu Ford recently announced that over the last three years, it's had to rehire about 350 "gray beard" engineers to mentor younger staff and reprogram diagnostic systems and AI tools that were failing to meet up to quality expectations. The company's VP of vehicle hardware engineering, Charles **** said that leaders overlooked the deep experience of veterans who survived many product cycles. **** admitted that simply replacing them with AI was a huge mistake, and that while AI is "a fantastic tool," it remains "only as good as the information you use to train it." The rehired engineers now run mandatory meetings to troubleshoot vehicles and reprogram automated engineering software and AI tools to prevent glitches before production. These technical specialists hunt for failure points before parts ever reach the plant floor, helping prevent the massive recalls and defects that previously cost the company billions as it aims to cut one billion dollars in expenses this year. In last year's JD Power Quality Survey, an annual study that measures the quality of a car during the first three months of ownership, Ford finished 10th among mainstream brands and scored below the industry average. But this year, JD Power ranked the automaker as the top mainstream brand, placing it above the likes of Toyota Motor Corp. and Honda Motor Co. Ford attributed this massive improvement directly to the expertise of these returned engineers. Ford's realization that AI cannot magically design and test quality vehicles without senior human oversight is just the tip of the iceberg. When Careerminds looked at companies that conducted AI-driven layoffs, researchers found out that 35.6% of those companies had to rehire more than half of the employees they previously fired. Another 32.7% had to rehire between 25% and 50% of them. In 2024, Sebastian Siemiatkowski, CEO of Klarna, proudly announced that its new chatbot was doing the work of 700 full-time customer service agents. As a result, the fintech company froze hiring and cut hundreds of positions. But by mid 2025, and into 2026, Klarna was scrambling to recruit human agents again because customer satisfaction had plummeted. It turns out, while AI is very good at answering basic questions like how to check an account balance, when faced with complex customer issues that require nuance, the thing usually resorts to the unhelpful, robotic corporate jargon we all know and love.
    • Free AI in IDEs is shifting to paid models Or you know, you could just learn to actually design and code apps, use frameworks to handle the repetitive parts and not use AI at all - and voila... free for life!
    • In a sane world US antitrust laws wouldn't even allow these companies to be in the position to be subjected to EU directives. As you say, better than oligarch nothing.
    • Apple reportedly has a second-generation iPhone Fold planned for 2027 Good grief, Apple hasn't even released a first folding phone and the Apple faithful is already obsessing over the sequel? Seriously people, go out and touch grass... because this level of obsession is borderline stalkery/neurotic.
  • Recent Achievements

    • Week One Done
      xvvxcvv earned a badge
      Week One Done
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      405
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Xenon
      68
  • Tell a friend

    Love Neowin? Tell a friend!