Recommended Posts

This'll be great when the time comes that we can effectively harness fusion reactions for energy production, but it isn't going to address any of our near-term needs.

Fission reactors don't have to be constructed in the "current" manner (the "Three Mile Island" ones most people commonly think of). Pebble-bed reactors remove a great many risks... are they perfect, no... but they could be used in the short term to provide a much safer form of energy.

http://www.wired.com/wired/archive/12.09/china.html

:cool:

Poor choice of location.  There are a lot of countries that could use the energy more than France.  I would rather see it in Japan, Korea, the U.S., or Germany.

586134160[/snapback]

It won't be connected to the power grid. It is a test reactor that will only operate for half second durations and the results will be monitored.

Fusion is combining two simple elements into a more complicated one.

The ultimate goal with Fusion is to combine Hydrogen and Oxygen so that the "waste" product is water.  The trick is to do this at reasonable temperatures.

586133646[/snapback]

No that is incorrect, that is not how it works, fusion is how the sun works for example, the great amount of mass pushes hidrogen atoms to tightly that they make a new element helium, but the trick is that some of the mass of the hydrogen "transforms" to energy (E=M*C*C). Fusion is more efficint than fission and can generate lots of energy that is why it's so difficult to control, literally nothing can stand the heat produced, so the only way to contain the energy is with giagant magnetic fields, but to the date the needed energy to mantain those fields is much more than the one produced by the reactor itself.

It won't be connected to the power grid.  It is a test reactor that will only operate for half second durations and the results will be monitored.

586134182[/snapback]

Wasn't aware of that...but then why France? Then you'd think they'd do it in Japan with more technical resources. Maybe closer to EU HQ in Brussels...its just that southern France strikes me as an extremely odd location.

Nice. Somday, Fusion will replace fission. And after that, Anit-Matter reactors!

From what i understand, fusion produces much less waste than fission does.

586131533[/snapback]

To expand on what Matt said, a fusion reactor only produces radioactive materials when you stop the reactor and dismantle it. During operation, a fusion reactor produces only energy and steam iirc.

No that is incorrect, that is not how it works, fusion is how the sun works for example, the great amount of mass pushes hidrogen atoms to tightly that they make a new element helium, but the trick is that some of the mass of the hydrogen "transforms" to energy (E=M*C*C). Fusion is more efficint than fission and can generate lots of energy that is why it's so difficult to control, literally nothing can stand the heat produced, so the only way to contain the energy is with giagant magnetic fields, but to the date the needed energy to mantain those fields is much more than the one produced by the reactor itself.

586134211[/snapback]

I wasn't "wrong". Fusion does fuse together lower order elements to make a higher order element.

I did say "the ultimate goal" of fusion was to combine hydrogen and oxygen to make water as a "waste" product.

I wasn't "wrong".  Fusion does fuse together lower order elements to make a higher order element.

I did say "the ultimate goal" of fusion was to combine hydrogen and oxygen to make water as a "waste" product.

586134568[/snapback]

Ok, sorry , then it's my mistake :p, I tought that when you said water as as waste product you meant like a direct product of fusion, because fussioning water and oxigen does not generate water.

perhaps you could explain me how they are going to use fussion to generate water, because i tought the ultimate goal is to heat water to move turbines to generate electricity

Edited by MEMO.INC
The ITER will not produce any actual electrical energy or anything.  This is just a test reactor that will be activated for about half a second at a time.

We are some time away (probably still decades) before we have cheap, clean, nuclear fusion.

Canada pulled out of the ITER partnership because the prospects seemed dim (to make a bit of a pun about electrical power generation).

586132391[/snapback]

I thought the purpose of the ITER was to produce a reactor that can self-sustain a fusion reaction, hence producing power. There are already fusion reactors around the world used to study the reaction for small amounts of time.

Also, E=MC^2 has nothing to do with nuclear reaction. It has to do with the theory that light (photons) and matter are the same and that they can be converted from one form to the other.

PS. I think this should be in BPN rather than NFN since I wouldn't consider this "nerd-free".

Edited by MrA

When you have any nuclear reaction, you measure the mass of the reactants compared the mass of the products. In order to conserve energy, the mass must have been converted to energy. You use E=mc^2 to determine the energy released. Strictly speaking, E=mc^2 should be written as delta(E)=delta(m)c^2; i.e., you can only look at changes in mass/energy and not absolutes.

With fission, you bombard a nucleus with neutron(s). The nucleus absorbs the neutron and splits into various fragments. There is no way to determine what the fragments will be; you can give probabilities on them only. In addition, more neutrons are emitted (usually 2 or 3), and hence you get a chain reaction. The more common products have long half lives. In fission reactors you also have control rods and moderators that absorb and slow neutrons. These rods/moderators also tend to become radioactive as they aborb neutrons.

Hydrogen fusion (in stars) is much more predictable, and you always end up with hydrogen (heavier) or helium. In fusion reactors, the material shielding or containing the reaction would generally become radioactive, as beta (electron) particles are emitted in fusion.

Overall, fusion is much cleaner than fission and gives higher energy yields. However, as stated, fusion requires extermely energetic particles to collide while fission performs better with slow (and less energetic) neutrons.

Matter/anti-matter reactors would be the most effecient form of energy conversion, as the the entire particle/anti-particle pair is converted completely into 2 photons (in the case of electrons/positrons). Antiparticles are made all the time. But in order to do so , you need to have high frequency/energy photons. So again, you would require far more energy to get the reaction going than would be produced :(

I thought the purpose of the ITER was to produce a reactor that can self-sustain a fusion reaction, hence producing power.  There are already fusion reactors around the world used to study the reaction for small amounts of time.

...

PS. I think this should be in BPN rather than NFN since I wouldn't consider this "nerd-free".

586135158[/snapback]

"ITER will use a hydrogen plasma torus operating at over 100 million degrees Celsius. It is designed to produce approximately 500 MW (500 million watt) of fusion power sustained for up to 500 seconds (compared to JET's peak of 16 MW for less than a second). ITER will not generate electrical power."

http://en.wikipedia.org/wiki/ITER

Yes, science is a little nerdy but since it does not directly involve personal computers and we don't currently have a Science forum and it is news. NFN is the best fit.

lol, third time you've had to post that.

586135687[/snapback]

+1

(I did make an error though, I said it would only sustain it for half a second. It will actually sustain it for up to 500 seconds)

The ITER will not produce any actual electrical energy or anything.  This is just a test reactor that will be activated for about half a second at a time.

We are some time away (probably still decades) before we have cheap, clean, nuclear fusion.

Canada pulled out of the ITER partnership because the prospects seemed dim (to make a bit of a pun about electrical power generation).

586132391[/snapback]

If this is the case, then I take issue with the title of this thread.

ITER isn't the first fusion reactor in the world. Hell, Princeton Plasma Physics Laboratory (PPPL) had the Tokamak Fusion Reactor running 23 years ago. Now they've got the National Spherical Torus Experiment.

If this ITER reactor is just another test reactor, what's the big deal?

If this is the case, then I take issue with the title of this thread.

ITER isn't the first fusion reactor in the world.  Hell, Princeton Plasma Physics Laboratory (PPPL) had the Tokamak Fusion Reactor running 23 years ago.  Now they've got the National Spherical Torus Experiment.

If this ITER reactor is just another test reactor, what's the big deal?

586137572[/snapback]

I agree with your point. The thread title is somewhat misleading. Nuclear Fusion is not a practical reality in 2005 (or, really, anytime soon).

[Thread Title Edited]

I'm not sure what the big deal is. Canada pulled out of the project because the costs seem to outweigh the benefits. You could build 10,000 MW worth of offshore wind generators for the cost of this project. At least that would produce practical renewable power. It is going to be a long time before Nuclear Fusion generates 10,000 megawatts.

Wasn't aware of that...but then why France?  Then you'd think they'd do it in Japan with more technical resources.  Maybe closer to EU HQ in Brussels...its just that southern France strikes me as an extremely odd location.

586134213[/snapback]

Well,...I sure would'nt want it in my Country...if a 'chain reaction' went uncontrolled and uncontained....they might be using France to park BMWs/Porches/Audi's....you'd think they pick a country with more Technology..but then on the other hand...LOL

Matter/anti-matter reactors would be the most effecient form of energy conversion, as the the entire particle/anti-particle pair is converted completely into 2 photons (in the case of electrons/positrons). Antiparticles are made all the time. But in order to do so , you need to have high frequency/energy photons. So again, you would require far more energy to get the reaction going than would be produced :(

586135638[/snapback]

Reminds me of this Omega particle Star Trek Voyager was talking about in one of its episodes. The Vulcan (Hot woman) was disappointed when she was unable to extract it or something...

Im still doing my A Level course on Nuclear Physics so it might be interesting to see how the things work. I only have the jist of it all.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Give Elon Musk, who illegally had access to citizen's data, even more of your data ! Top idea !
    • An oldie but a goodie
    • I did that to a work colleague many years ago when he left it logged in. Unfortunately I was out of the office the next day, and even the IT department was stumped lol. Got a bit of a bollocking when I got back into the office, but, by god, it was worth it.
    • 7-Zip 26.02 by Razvan Serea 7-Zip is a open source file archiver with a high compression ratio. The program supports 7z, XZ, BZIP2, GZIP, TAR, ZIP, WIM, ARJ, CAB, CHM, CPIO, CramFS, DEB, DMG, FAT, HFS, ISO, LZH, LZMA, MBR, MSI, NSIS, NTFS, RAR, RPM, SquashFS, UDF, VHD, WIM, XAR, Z. Most of the source code is under the GNU LGPL license. The unRAR code is under a mixed license: GNU LGPL + unRAR restrictions. Check license information here: 7-Zip license. You can use 7-Zip on any computer, including a computer in a commercial organization. You don't need to register or pay for 7-Zip. The main features of 7-Zip are: High compression ratio in 7z format with LZMA compression Compression ratio for ZIP and GZIP formats: 2-10 % better than the ratio provided by PKZip and WinZip Strong AES-256 encryption in 7z and ZIP formats Self-extracting capability for 7z format Integration with Windows Shell Powerful File Manager Powerful command line version Plugin for FAR Manager Localizations for 74 languages 7-Zip 26.02 changelog: Some bugs and vulnerabilities were fixed. Download: 7-Zip 26.02 (64-bit) | 1.6 MB (Open Source) Download: 7-Zip 26.02 (32-bit) | 1.3 MB Download: 7-Zip 26.02 (ARM64) | 1.5 MB View: 7-Zip Website | Release Notes | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      xvvxcvv earned a badge
      Week One Done
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      401
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!