Recommended Posts

Standard has support for 4 Processors. Enterprise 8.

HT Processors are NOT counted to the license limit. Windows Server 2003 understands a logical processor where as 2000 doesn't.

so 2 XEON's with HT enabled only count as 2 Processors. (They'll appear as 4 in Task Manager).

  Steven said:
Standard has support for 4 Processors. Enterprise 8.

HT Processors are NOT counted to the license limit. Windows Server 2003 understands a logical processor where as 2000 doesn't.

so 2 XEON's with HT enabled only count as 2 Processors. (They'll appear as 4 in Task Manager).

586205447[/snapback]

Steven, I think when you are speaking technically though, you either use the single proc HAL or multi proc HAL. If Intel Hyperthreading is enabled, Windows will install using the multi proc HAL. So if you already have that HAL installed, adding another physical proc will not be an issue. In terms of licensing, he would only have a max of 4 procs (two physical, two logical) in a two proc system in which Windows Server 2003 Standard would be just fine.

I'm going to sorta bump this thread and ask a similar question, but a slightly different OS. I just installed my Athlon X2 Dual Core, and I had a single core installed. When I booted in XP and XP x64 (2003 code), it detected the new processor and had me reboot. Now the system reads it is ACPI Multiprocessor PC (ACPI Multiprocessor x64-based PC in x64) and task manager shows both cores there. Should I go ahead and reinstall Windows? I don't mind if I have to reinstall XP 32bit and XP x64, not a problem for me. :)

  Mattimeo said:
In terms of licensing, he would only have a max of 4 procs (two physical, two logical) in a two proc system in which Windows Server 2003 Standard would be just fine.

586205560[/snapback]

No, thats the thing in terms of licensing it would only count as 2 processors. The logical processors don't count. They do count in Windows 2000. They dont' count in Windows Server 2003.

Windows 2000 Server: 2 Processors with HT = 4

Windows Server 2003: 2 Processors with HT = 2

Which means you can have "8" in Windows Server, 4 Physical with HT. That counts as 4 which is your license max.

Task Manager will show 8 but to the system it will only count 4.

  • 4 months later...

Hi

i have a rather strange situation,

i have installed Windows 2003 Enterprise on a System with a Asus NCT-D and 2 Xeon Noconas

Thing is, windows only shows me one CPU in task manager (yes i ckecked it to show me all the cpus), in taskmanager i see 4 cpus but under Computer it only says ACPI and the installed dll is hal.dll...

how can i get it to change to multiprocessor HAL?

i tried to update the driver, but it only lets me select ACPI and standard PC...

thanks

cobra

To change the HAL installed on your system:

Open Device Manager. Under the Computer node, you'll find one of the following:

Standard PC

MPS Uniprocessor PC

MPS Multiprocessor PC

Advanced Configuration and Power Interface (ACPI) PC

ACPI Uniprocessor PC

ACPI Multiprocessor PC

post-9158-1134631266.png

The first three HALs are used on non-ACPI compliant hardware, the last three are for ACPI compliant machines. You'll have to figure out which one yours is and which one you need to use. It shouldn't be that hard; in your case, you'll either have the Multiprocessor HAL already installed and you won't have to change anything. Or, you might have the Uniprocessor HAL and have to change to the Multiprocessor. To do so, select the HAL and click Update Driver. Choose to Install from a list or specific location (Advanced) and then choose Don't search. I will choose a driver to install. Ensure the Show compatible hardware checkbox is marked and then select your desired HAL.

Big fat warning here: MAKE SURE YOU INSTALL ONLY A HAL DRIVER DESIGNED FOR YOUR HARDWARE!!! If you choose the wrong type, your machine WILL BE unbootable and you'll probably have to reinstall Windows.

Edit: Read this MSKB article for info on the different types of HAL drivers and how to change them. According to the article, you are fully able to simply install the CPU and Windows will detect it and automatically change the HAL as required. This is what I suggest :yes:

  Quote
On Windows XP and later versions, the ACPI Uniprocessor HAL and the MPS Uniprocessor HAL recognize the existence of more than one processor and report the MP ID. Plug and Play detects that the computer devnode's hardware ID list has changed and moves the devnode back through the "found new hardware" detection process. Therefore, when you add a second processor, the MP files (HAL and kernels) are automatically installed, and you do not have to manually update the driver in Device Manager.
Edited by John

as mentioned i have

Advanced Configuration and Power Interface (ACPI) PC installed, which is wrong i presume..

  John said:

Don't search. I will choose a driver to install.[/i] Ensure the Show compatible hardware checkbox is marked and then select your desired HAL.

problem is, i only have the following selection, although 4 CPUs are shown in taskmanager

Standard PC

Advanced Configuration and Power Interface (ACPI) PC

Help! ;-)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If narwhal is the identification, aren't the elephants dumb?
    • You do realize that if you are using Full Self Driving that you aren't actually driving, right?
    • I see several on eBay. Am I blind, or is this something else? Link (I know this link isn't in UK, but an example)
    • When my Tab S9 FE tablets were upgraded to Android 15 and Samsung UI 7.0 there were some default systems changes. One of them was. when I wanted to Power Down the tablet and tapped the Power button, Gemini popped up and I had to say Power Off which then brought up the Power Off menu resulting in an extra step in powering down the tablet. After some sleuthing I found that I could turn off Gemini and go back to the old menu, so I did. Maybe one day I will be comfortable talking to a machine but that day is not today.
    • Rufus 4.8.2253 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.8.2253 changelog: Switch to wimlib for all WIM image processing: Greatly speeds up image analysis when opening Windows ISOs Can speed up Windows To Go drive creation (But won't do miracles if you have a crap drive) Might help with Parallels limitations on Mac (But Rufus on Parallels is still unsupported) Enables the splitting of >4GB files with Alt-E (But still WAY SLOWER than using UEFI:NTFS) Others Switch to using Visual Studio binaries everywhere, due to MinGW DLL delay-loading limitations Add more exceptions for Linux ISOs that restrict themselves to DD mode (Nobara, openSUSE, ...) Improve reporting of UEFI bootloaders in the log, with info on the Secure Boot status Fix an issue with size limitations when writing an uncompressed VHD back to the same drive Fix a crash when opening the log with the 32-bit MinGW compiled version Fix commandline parameters not being forwarded to original Windows setup.exe Download: Rufus 4.8 | Portable | ~2.0 MB (Open Source) Download: Rufus 32-bit | ARM64 Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Posting Machine
      David Uzondu earned a badge
      Posting Machine
    • One Month Later
      Stokenking earned a badge
      One Month Later
    • One Month Later
      Kevin Jones earned a badge
      One Month Later
    • Week One Done
      Kevin Jones earned a badge
      Week One Done
    • One Month Later
      henryj earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      530
    2. 2
      ATLien_0
      267
    3. 3
      +Edouard
      198
    4. 4
      +FloatingFatMan
      189
    5. 5
      snowy owl
      138
  • Tell a friend

    Love Neowin? Tell a friend!