Which one faster?!


R34 Z-tune vs Saleen SR7 Twin Turbo  

69 members have voted

  1. 1. R34 Z-tune vs Saleen SR7 Twin Turbo

    • R34 Z-tune
      18
    • Saleen SR7 Twin Turbo
      51


Recommended Posts

well over power/weight the saleen has the advantage.. but a automotive review tested the z-tune 0-400 m run with around 10.06 secs during development and the saleen 10.7 secs with the quarter mile (402.25m)

586397995[/snapback]

OR that's what they SAY it did. But c'mon, is that the first time an automaker has blown smoke up your pipe to market a new limited edition car? It was not approximately a quarter-mile, the car could've blown up had it ran the length and then the time wouldn't have been so good. Anyway, after looking at the interior of the Z-Tune, that S7 is looking might slick, regardless of me hitting my head on the roof everytime I enter the car. And this is what these are always about; " I can pay $5K for this car, put a tc and some aftermarket stuff, and it'll run faster than you pricey ferrari", but in the end, it'll still look like a honda and feel like a bunch of plastic.

Edit: i'm not trying to be mean now, I like this car too, but for the money, the S7 wins hands down, even if it gets me to the club 1second later.

Edited by DarkRyu
Ruins handling? You gotta be kidding me...

If you're talking about stock for stock on quarter miles, obviously the Z-tune is no match for the Saleen. On track, it depends a lot on the driver as well, either could win. Potential wise, the Z-tune can be pushed further than the specs say, as long as you have the money.

586395507[/snapback]

Anything can be pushed further then specs. But there is a rule "there is no replacement for displacement". Basically, i am saying that a 7.0 liter if "turned more" spent more money could make more power.

Oh yeah when i was referring to handle, it was more in a drift sense. But please go look up the weight distrubtion on your Z-tune. I bet is 60-40. Even with AWD can we say "understeer". Of course the Z-tune isnt set up for a drift, since handling is not losing traction. Also the r34's arent (from what i know), known for handling. I mean they are tanks 3500 Ibs 2 door. That rivals a z28 in weight.

u guys cant be serious comparing a saleen with a god damn skyline...

the skyline has been tuned, meaning at stock it wasnt meant to have a big turbo whacked on it or whatever it has on it. the wear on the engine will be massive compared with that on the saleen..

The saleen will hit 0 - 60 in 3.2 Secs, the skyline cant match that it will just spin forever.

round a track the saleen will hammer it, maybe 3 - 4 seconds more..

it just isnt about performance, the saleen with have a race chassis, and a lot more development to make sure that car flies around a track.. the skyline is the stock chassis with upgraded springs, so the shell is still un-aerodynamic..

Also, because the skylines power is from tuning its power comes in at 6,800rpm and its redline is at 8K, i just dont know how u guys can compare to the saleen to the skyline..

the saleen will leave it on straight, track, space... anywhere man. :cool:

well over power/weight the saleen has the advantage.. but a automotive review tested the z-tune 0-400 m run with around 10.06 secs during development and the saleen 10.7 secs with the quarter mile (402.25m)

586397995[/snapback]

thats nice, but doesnt say much about the car(s) neither car probably hit top speed in the 1/4 mile and i guarantee u at distances over 1/4m at full acceleration the Skyline will be so bogged down by wind resistance its not even funny

skyline will win just over chip it ans your sorted

586398113[/snapback]

u can also boost the turbos in the saleen so whats the difference? The turbos in the saleen are only at 4-5lbs if im not mistaken.

I still stand by my initial statement.

The Skyline IIRC runs a 10.1 1/4 mile. It's a pure handling car.

Plus you don't seem them often. I'll drool over a Skyline more than a Saleen

586413356[/snapback]

You're telling me you see a $500k Saleen S7 more than a $100k Skyline? I think you mean the plain jane Saleen...

With that said, I think you're crazy

  • 1 month later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • IBM reveals sub-1nm chip technology, production expected in another 5 years by Pradeep Viswanathan TSMC is now leading the chip manufacturing industry with its 2nm-class process node called N2. Samsung Foundry also has a 2nm-class process node called SF2. TSMC says N2 entered volume production in Q4 2025. Samsung says SF2 started mass production in 2025. Today, IBM announced the world’s first sub-1-nanometer chip technology, marking another major semiconductor research milestone. The new technology is based on a 0.7nm, or 7-angstrom, node and uses a new transistor architecture called “nanostack.” The new design vertically stacks and staggers nanosheet-based transistors so that more components can fit into the same chip area while also improving performance and power efficiency. IBM claims that this new sub-1nm chip can pack nearly 100 billion transistors onto a chip the size of a fingernail. This offers almost twice the density, up to 50 percent higher performance, or 70 percent better energy efficiency when compared to IBM's 2nm node design announced back in 2021. Also, IBM mentioned that this new architecture can deliver 40 percent SRAM scaling. It is important to consider that this announcement from IBM is a research milestone rather than a near-term process node launch. Back in 2021, IBM unveiled the world’s first 2nm chip design, claiming 50 billion transistors on a fingernail-sized chip and major performance and efficiency gains. Five years later, IBM’s 2nm technology has still not entered mainstream commercial production. That is because IBM is no longer a major commercial chip manufacturer. It sold its chip manufacturing business to GlobalFoundries years ago and has since then focused only on semiconductor research, IP development, and partnerships. To productize its 2-nm chip technology, IBM partnered with Japan’s Rapidus, but it has not resulted in anything shipping at scale. IBM says that its new sub-1nm technology can reach production as early as within the next five years. If that happens, it will likely depend on manufacturing partners, advanced EUV tooling, and years of yield improvements.
    • It's funny when thieves accuse other thieves of stealing. Ai companies just blatantly siphoned all the knowledge of the internet without consent and are now selling it with their service... so excuse me if I find this a bit ironic.
  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      454
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      135
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!