Recommended Posts

Bored lately so back to OCing the PC. So far...

ccpuz.php?id=73433

Abit IC7-Max 3

Corsair TwinX1024-3200LL @ 196MHz 2-2-2-6

Unfortunately, temps are a little high at 49C/55C but strangely are not really different than running 3.0GHz.

Cooling the CPU with a Thermalright XP-120 and Panaflo 120mm. The case has a Antec 120mm intake and another for out.

pentium 4, 3.0ghz 800fsb L2 2mb cache. overclocked to 3.6ghz. running 39 - 47c at max. 240x15 fsb

2 gigs ddr2 400 memory running dual channel

maxtor 100gb hd

ati radeon x1300 256mb graphics card

3 thermaltake case fans / standard intel cpu fan heatsink

comcast broadband tweeked to 6.5mbps.

windows xp media center with sp2

:devil:

I'm sure you've seen a billion Sandy 3700+ OC's.

Highest semi-stable (fine for gaming and daily work, not prime95 stable after a while) OC:

post-85211-1141245902_thumb.jpg

Highest 100% stable OC:

post-85211-1141245952_thumb.jpg

I'm using a Tower112 heatpipe cooler with AS5. I keep my office pretty cold (around 60F), thus the cold temps. Even under full load, I've never seen the CPU above 115F. I'm afraid to give it any more voltage to push it higher, though. Opinions?

Also got a 6600GT to 570/1.16, but that's nothing special.

Peace,

Pete Zaria.

AMD Sempron 3100+ 90nm

1.8 MH -> 2.6 MHz (290 x 9 @ 600 HTT)

On air cooling max. temperature on 100% cpu usage is 43 C after 2 ours of video converting :yes:

Dam, what Vcore you using on it?

I've got the same CPU, running @ 2.53Ghz on 1.48V, prime95 stable. Temps go up to 48Cish when gaming though - Prime95 torture test took me all the way up to 54C after a while :pinch:

Had to bump up my chipset voltage too, CPU is only 32C idle :)

I'll try to take it further when i get some better cooling :yes:

Dam, what Vcore you using on it?

I've got the same CPU, running @ 2.53Ghz on 1.48V, prime95 stable. Temps go up to 48Cish when gaming though - Prime95 torture test took me all the way up to 54C after a while :pinch:

Had to bump up my chipset voltage too, CPU is only 32C idle :)

I'll try to take it further when i get some better cooling :yes:

How fast is that in usual usage > load times etc. How long does it take to work out pi to 1000000 digits?

How fast is that in usual usage > load times etc. How long does it take to work out pi to 1000000 digits?

SuperPI 1m is 40 Seconds bang on, could proberbly get it lower if my ram was running faster (had to run a divider on it, only running at 180Mhz atm)

Haven't noticed a difference in load times though - CS:S Seems quite a bit smoother :yes:

CPU-Z verification

CPU : AMD Athlon 64 3000+ (*1) (**Sock Cooling and running @ 30 degrees**)

CPU PSN : AMD Athlon 64 Processor 3000+

CPU EXT : MMX (+) 3DNow! (+) SSE SSE2 SSE3 x86-64

CPU Cache : L1 : 64/64 KB - L2 : 512 KB

Core : Venice (0.09) / 0xFF0 / DH-E3

Freq : 2520.58 MHz (280.06 * 9)

----------------------------------

MB Brand : DFI Corp LTD

MB Model : LP NF4 Series

NB : nVidia nForce4 rev A3

SB : nVidia nForce4 MCP rev A3

----------------------------------

RAM Size : 1024 MB

RAM Freq : 229.1 MHz

RAM Type : DDR-SDRAM Dual Channel

RAM Ratio : CPU/11

RAM Timings : 2-2-2-6

----------------------------------

Slot 1 : 512MB (PC3200)

Slot 1 Manufacturer : OCZ

Slot 2 : 512MB (PC3200)

Slot 2 Manufacturer : OCZ

GPU:

BFG 7800 GT OC- Core- 490 MHz Memory- 1.15 GHz

Ive got an xp-120 but.. i cant use it without using my 7800 in the second PCI-E slot

Dam, what Vcore you using on it?

I've got the same CPU, running @ 2.53Ghz on 1.48V, prime95 stable. Temps go up to 48Cish when gaming though - Prime95 torture test took me all the way up to 54C after a while :pinch:

Had to bump up my chipset voltage too, CPU is only 32C idle :)

I'll try to take it further when i get some better cooling :yes:

Here you can see CPU-Z Database with all information

  • 2 weeks later...

Temporary:

3500+ Newcastle

DFI Lanparty NF4 Ultra-D

1gb Patriot

... Had it solid at 2.6 but was runnin a bit hotter than i'd like with stock cpu cooler

Currently at 2.47 (275x9) This ram has surprised me, so far i've gotten it too 280 without any stability issues but haven't done a hard/long test at that speed.

Late this coming week I'll be water cooled thankfully so i'll be uppin the juice when that gets here and really let this thing loose.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Anthropic pulls Fable 5 and Mythos 5 after US export control order by Pradeep Viswanathan In April this year, Anthropic launched the Claude Mythos Preview frontier model with state-of-the-art cyber and coding capabilities for a select set of companies around the world. After preparing appropriate guardrails, early this week, Anthropic launched Claude Fable 5 and Mythos 5, its most capable AI models. Claude Fable 5 is for general users and comes with strict safeguards, while Mythos 5 is designed with fewer safeguards for cybersecurity and biology use cases. Today, Anthropic abruptly suspended access to its Fable 5 and Mythos 5 AI models for all customers after receiving an export control directive from the US government. The company received the directive from the government today at 5:21 p.m. ET, and the received letter did not provide any details regarding the national security concern. Anthropic understands that the government became aware of a method to bypass, or “jailbreak,” Fable 5, which might be the reason behind the directive. The order was issued under national security authorities and requires the company to suspend all access to Fable 5 and Mythos 5 by any foreign national, whether they are inside or outside the United States. The restriction also applies to foreign national employees working at Anthropic. As a result, the company has disabled both models for all customers to ensure compliance. Access to previous Anthropic models like Opus and Sonnet is not affected by this government order. The company highlighted that it had developed strong safeguards to reduce the possibility that Fable is misused for tasks related to cybersecurity. In fact, many developers are complaining that the safeguards are going overboard. Additionally, the company worked with the US government, the UK AISI, multiple private third-party organizations, and internal teams to red-team Fable’s safeguards for thousands of hours. Finally, Anthropic noted that no testers have yet been able to find a universal jailbreak on Fable 5. As expected, Anthropic disagrees that a narrow potential jailbreak should lead to the recall of a commercial model used by hundreds of millions of people. It warned that applying this standard across the AI industry could effectively halt new frontier model deployments. Anthropic concluded by mentioning that it is working to restore access to Fable 5 and Mythos 5 as soon as possible and plans to share more details within the next 24 hours.
    • Brave Browser 1.91.172 is out.
    • Any Video Converter Free 9.2.3 by Razvan Serea Any Video Converter is an All-in-One video converting tool with an easy-to-use graphical interface, fast converting speed and excellent video quality. Any Video Converter supports all popular video formats and converts your videos to different video formats including MP4, MOV, MKV, M2TS, M4V, MPEG, AVI, WMV, ASF, OGV, WEBM, and more. It supports converting videos to customized percent (50%, 100%, 200%, and more) or resolution (480p, 720p, 1080p, 4K, and more); It supports encoding videos into x264, x265, h263p, xvid, mpeg, wmv, and more. Any Video Converter Free key features: Compatible with Windows 11/10/8.1/8/7 (32-64bit) User interface are available in 14 languages Convert all kinds of video formats including high-definition videos Extract audio from any videos and save as MP3/WMA for your mp3 player Take snapshot from any videos and build your own picture collection Support high-definition for both input and output Batch add videos from hard drive and batch convert Customize output parameters completely as you like Manage your output videos files by group or output profile Merge several video files into a single and long one Clip a video into segments Free Audio Filter: Adjust audio volume and add audio effects Crop frame size to remove black bars and retain what you want only Adjust the brightness, contrast, saturation Rotate or flip or add noise/sharpen effects Produce output video with subtitles of your own dialogue and much, much more... Any Video Converter Free 9.2.3 changelog: Fixed video download engine auto-update failures. Added custom speed control support in the speed change tool. Added support for downloading YouTube AI-generated subtitles. Added support for preserving original audio stream in the format convert tool (e.g., Dolby Atmos, DTS:X). Fixed other bugs and improved overall performance. Download: Any Video Converter Free 9.2.3 | 7.6 MB (Freeware) View: Any Video Converter Free Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Not sure what country you’re in but in many countries you can absolutely jail the sellers behind businesses… in fact I’d say in most countries you can do that
    • I guess we are done since you refuse to read my comment you replied to or my other comment in another thread you were also a part of here.
  • Recent Achievements

    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
    • Rookie
      Rimplesnort went up a rank
      Rookie
    • One Year In
      Markus94287 earned a badge
      One Year In
    • One Month Later
      Markus94287 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      176
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      ATLien_0
      92
    5. 5
      Steven P.
      79
  • Tell a friend

    Love Neowin? Tell a friend!